To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
1,400-lb Capacity. Upgrade your Ram ProMaster City's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Features:
Specs:
Towing or hauling a heavy load can cause rear sag as your factory suspension compresses under the weight of the load. This means that the rear axle is trying to support not only the extra load but also the weight of your vehicle. And because there is less weight on your front axle, your front tires make less contact with the road, which causes problems with traction, steering, and braking. SumoSprings upgrade your vehicle's factory suspension to level your vehicle, improve driving performance, and keep your ride comfortable.
SumoSprings provide progressive load control - the more you load them, the stiffer they become. With a lighter load, the springs will compress easily for soft engagement and a less bumpy ride. The closed-cell urethane material allows for smooth contact between the springs and your vehicle. And the springs act like a shock absorber to dampen road vibration.
The springs can also compress by as much as 80 percent to support a heavy rear load and to help your factory suspension bear up under the load. This evens out the weight, which levels your vehicle and ensures that your front tires are making better contact with the road. A level ride means that you have improved driving control, ensures safe headlight aim, and helps to minimize sway. The springs also support your factory suspension, which helps prevent sagging and reduces bottoming out.
The springs work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn. This also helps compensate for an off-center load.
These microcellular urethane springs are tough. They resist abrasion, oil, salt, and UV rays that can more quickly wear out other springs, and they perform well in temperatures ranging from -25 F to 200 F (-33 C to 93 C).
SumoSprings compress vertically with minimum expansion to the sides, so they won't be damaged by nearby mechanical parts and they fit safely into tighter spots. And unlike air springs, SumoSprings require no maintenance or adjustment.
The helper springs are custom designed to fit your vehicle, and they install easily - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we'll be taking a look at the SumoSprings Solo Line of Custom Helper Springs for the rear axle. You'll want to use eTrailer's fit guide to determine the correct kit for your vehicle. This is what our SumoSprings look like when installed. Yours may look a little different depending on your vehicle.They're gonna replace our factory jounce stops and sit right between our frame and our rear axle. So whenever we're carrying a heavy load, they're gonna give us that extra support that we need. The way our SumoSprings are gonna work is when our suspension starts to sag from the heavy load, these are gonna absorb a lot of that weight.They are gonna work independently from each other so it's gonna help with those off-center loads.
Our springs are gonna have a progressive rate to 'em. So if we have a light load, they're gonna compress softly, still giving us that comfortable ride. But the heavier load we put on 'em, the more they're gonna compress and the more firmness they're gonna have to them.Now comparing to our factory jounce stop, you can see there's a big difference in height. These are gonna give us a lot more compression, whereas our factory jounce stops are really just preventing the axle from hitting the frame.We have a water tank at the bed of our truck as a heavy load or to simulate the tongue weight of a heavy trailer or a fifth wheel. So as I take the truck through my test course, I can definitely tell that there's a load back there.
The engine doesn't seem to be strained that much, but the bumps are extremely harsh and I can definitely feel it resonating through the seat.When I come to the slalom course and I'm going through the turns, it definitely has a lot of body roll and I just generally feel like I need to slow down because it feels likes it's leaning a lot and it's not responding quickly enough to the turns.Now that we have our SumoSprings installed and I have the same load back there, when I'm driving through our course, I can immediately tell a difference. It's much of a smoother ride. Going over the bumps really doesn't feel like anything's back there and it's just a lot more comfortable.When I come into the slalom course, it definitely feels a lot more stable and it doesn't seem to sway as much side to side and it just generally feels like it wants to go faster.These are made of a durable micro cellular urethane that works in temperatures from -25 degrees to 200 degrees Fahrenheit, and resists damage caused by oils, road salts and UV rays. Compared to air bags, these are maintenance free option with no tubes to run or air pressure to maintain. Both will help level your load and provide a smoother ride.
Airbags can be adjusted to suit your needs whereas the SumoSprings are a fixed option.That completes our look at the SumoSprings Solo Line of Custom Helper Springs for the rear axle.
Average Customer Rating: 4.7 out of 5 stars (1773 Customer Reviews)
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Springs installed properly. However they are not square. Both Springs on a slight angle I believe this compromises optimal performance
They look great on My 2019 Ram ProMaster City
Raised her up full 2 inches
Fast Shipping easy install for my mechanic
Thank you so much
Makes body sway go away. Wind is little problem with the van now.
Review from a similar SumoSprings Solo in Vehicle Suspension
First off, these won't fix worn out suspension components, they are designed to improve ride quality by reducing sag/porpoising, especially on heavier vehicles.
Our 2010 Roadtrek 210P (75k miles) is a great rv but essentially a big heavy tub going down the road. Has the tendency to lean and wallow front to back. New shocks and all suspension is good, as mentioned make sure that stuff is all in good shape.
Pics show the oem stops vs the SS stops. Big difference - you may assume ride gets harsh but not the case. The oem stops were very tired and didn't do much. The preload on the new SS stops is just about perfect - any weight changes are very progressive which takes the harshness out of the ride. I didn't really see any change to ride height either.
Road manners are improved, there's a bit more resistance to lean, but the main difference is that the front end doesn't try to change height as readily with the back end.
Not a big deal to install. Youbdont need to pull the wheels, just turn them side to side to get to the stops. Pop out the old stops and clean the retaining cups with a wire brush and some brake clean. I used syl-glyde on the new stops to help get them into place. I also used a crowbar under the stop to push it into the cup while making sure the 4 tabs captured the top of the stop. Final step was to lower the van and give it a drive, then check to ensure the fit was good. The key here is to clean the cup first and use a bit of lube on the new stop.
Very pleased and I'll be installing SS on the back end soon. Yup, they're pricey but they are good quality with a limited lifetime warranty.
Roadtrek - 01/05/2023Review from a similar SumoSprings Solo in Vehicle Suspension
I installed Sumo Springs on our 06 Xterra right after we bought our Casita 17' trailer. The back of the X squatted a bit more than I liked. I had also noticed before some tendency to bottom out if the car was full of people and stuff. These ingenious devices are a perfect solution for me! They are about 3/4" clear of being engaged with the axle when unloaded, so the ride is not overly affected, but progressively take up some of the weight when the back end starts coming down with load. It now sits very nicely with the trailer connected, no weight distributing hitch and stuff in the back, and no more bottoming. We've put a good number of miles on the X in the last year, towing and not towing, and they are still doing the job.
I should note, the back of my Xterra is lifted about an inch with AAL springs. If that were not the case, the Sumo Springs would be engaged all the time. That will vary with vehicle.
I will also note that they are non-adjustable, unlike airbags. I kinda like that, I didn't want to mess with adjusting air pressure and such. But once they do start kicking in as one or both wheels travel, they do stiffen it up quite a bit. I mean, there's no way around that; you can't take load without stiffening the suspension. As such I think they inhibit upward axle articulation a bit when 4-wheeling, but for us that's not a big deal. Since they do not connect to the axle, they don't affect downward articulation at all.
The pics are shortly after installation, one with the car unloaded, and two with trailer and gear loaded up.
Review from a similar SumoSprings Solo in Vehicle Suspension
This review is based purely on the installation. It took as long to jack up my 4Runner, place jack stands under the frame, and remove the tires as it did to install the Sumo Springs. I installed these to lessen the squat of the 4R while towing my boat and my camper (WD hitch used while towing the camper). The Sumo Springs sit just above the real axel which should greatly reduce the squat and lessen the bounce while towing. Went this route based on other 4Runner owner's reviews.
Review from a similar SumoSprings Solo in Vehicle Suspension
I would have give it a 5star but the bolts are 1/4” I think it should be at least minimum of 3/8” or1/2” bolts to hold the sumo springs. I like them toed the camper handles very well. Wishi got these a long time ago worth getting. With out camper can tell that it’s there but rides ok. I wanted the same ride it not quite. I ask what the how high they are said 5” with bracket but it’s actually 6” with bracket see picture. I would recommend getting the sumo springs ssr-610-47.
Luc - 04/18/2022Review from a similar SumoSprings Solo in Vehicle Suspension
Parts arrived on schedule. At first I thought that the parts did not fit my truck, so I called customer service and they immediately started to send me a return label and refund. It turned out that I was wrong, and the parts did fit. I called them back cancelled the refund action.
Great friendly service!
I also found that the price I paid was much cheaper than [online store]. I highly recommend etrailer!
David B - 05/31/2022Review from a similar SumoSprings Solo in Vehicle Suspension
Seems very robust. Looking forward to towing the trailer in the spring! Relatively easy to install, but thanks to a little [online] search, I was able to install them more easily. The steps for installation did not call for any lubrication of the top of the spring in order to get it into place, but it definitely needed it. I took multiple attempts to try and install them without and they simply wouldn't slip into place. I used a little bit of Simple Green in order to provide the lubrication that they needed to slip into place. It worked on the first attempt. OE bump-stops included in the picture next to the new Sumo Springs.
Review from a similar SumoSprings Solo in Vehicle Suspension
Very straight forward installation. Simple. very noticeable difference under load. Towing with the gooseneck also an improvement, looking forward to the longer road trip test. So far pleased with the product and results
Richard J - 06/04/2022Review from a similar SumoSprings Solo in Vehicle Suspension
Took all but 15 minutes each side to install. Haven't hooked up trailer yet, but looking forward to see how it handles.
Review from a similar SumoSprings Solo in Vehicle Suspension
2015 Frontier Crew cab Desert Runner (purchased the yellow Sumo Springs). Easiest install ever! 18mm deep socket and long breaker bar for breaking nuts loose. Removed factory bumpstop, install sumo bracket and retighten U bolts to 58 foot pounds. After installing both brackets, lifted back of truck up 4 inches to install sumo spring with blue lock tight on bracket bolt, tighten sumo spring onto bracket and lowered truck off the jack. Overall it raised the back of my truck bed 1 inch. Ride is stiffer with no bed roll in the turns. Loaded my 24 foot travel trailer with load leveler- equalizer bars and gained 3 inches (less “squat”.) Truck is level now vs nose high (without the sumo springs). Definitely an upgrade that was needed in 2015 when I first bought the truck!!!
Mike M - 02/01/2022Review from a similar SumoSprings Solo in Vehicle Suspension
I had Sumo helper springs installed on my Winnebago Sprinter RV both front and back. It made an amazing difference! It no longer felt like riding in a Conestoga wagon…swaying side to side and bouncing everything to the floor. The ride is now smooth. Driving was easier. Turns are suddenly level instead of feeling like I might turn over. I could not be happier with these products! And it only took 20 minutes to install all four!
Review from a similar SumoSprings Solo in Vehicle Suspension
Gave it 5 because of ease of install - note they use SAE threads 9/16, truck frame and oem is metric 15mm wrench. Makes no difference but don't use oem nuts on spring. I installed all shims supplied and this left about 3/4" gap so hoing its the best for my needs. Easy to reduce if needed.
Review from a similar SumoSprings Solo in Vehicle Suspension
I wish I installed these earlier on my Ram Promaster converted into a camper van, the improvement in stability, feel and peace of mind. No longer blown around in high wind, better towing for my boat, firmer feel just driving normal. Hard to describe all the benefits but for how reasonable they are priced and ease of installation certainly wish I had these day one when I bought the van. 100% will install these again on future vehicles and would definitely recommend this to any and everyone
Review from a similar SumoSprings Solo in Vehicle Suspension
I just finished installing the Sumo Springs to my 2020 Ram 3500. The install was super easy. Instruction were easy to follow and the whole thing took less time than I thought. I won’t know how they perform until I pull the 5er out of storage this spring, but I am ready. My only question and the reason for 4 stars instead of 5 was I thought they would sit closer to the axle than they did, may 2” from axle and I would have liked may 1” maybe I could have used another spacer and longer flat head screw to bring it closer but we will see when I put the weight on the truck. I included picks if someone wants to give me their opinion. So far I am really happy with them.
Brian - 01/31/2022Review from a similar SumoSprings Solo in Vehicle Suspension
I gave the SumoSprings an initial rating of 4-stars because they do work as advertised. During the first thousand miles I've driven since installing them on my 2019 Toyota 4Runner, I have noticed they contact the rear axle much sooner than the OEM bumper stops which serves to quickly increase the suspension's resistance to any further downward motion of the truck's body - which not only dampens excessive rear end "dipping" on rough terrain, but also works well to prevent any appreciable rear end squatting from the tongue weight of my heavy 2-axle utility trailer.
I reduced my initial rating by one star because, while they centered on the mounting bracket holes in the same manner as the OEM bumper, I wasn't able to center the SumoSprings over the rear axle even after pushing them as far forward as the elongated bolt holes would allow.
Since the center of the SumoSpring pad (midway in the adjustment range of the elongated bolt holes) is in exact vertical alignment as the center of the OEM bumper, the only explanation would be that the 4Runner's coil-spring rear suspension has a slightly arced rear-axle "full travel" range as it rises upward from the lowest to highest position. If that "full travel arc" moves the axle to its rearmost position when the suspension is at full compression (where it contacts the OEM bumper), the "full travel arc" would then move the axle about 1/2" forward during the downward portion of the arc back to the normal ride position.
Therefore, since the surface of SumoSpring's long cushion pad is very close to the axle when it's in the normal ride position, that would explain why the SumoSpring at its farthest forward adjustment position is still about 1/4" to the rear of being centered on the axle(even though the SumoSpring in that position is now a bit further forward from vertical center of the OEM bumper).
However, since the rear axle's upward travel moves it slightly to the rear (and more toward center-mass of the SumoSpring's cushion pad), perhaps it won't suffer any premature deterioration or failure - but only time will tell about the SumoSpring's durability and longevity.
Jenny N - 10/27/2021 Brent - 10/22/2022Review from a similar SumoSprings Solo in Vehicle Suspension
I installed these myself on a 2020 F150 XLT 4x4 in half an hour. There was no need for a jack or jack stands because the ride height of the stock suspension allowed just enough room. As you can see in the photos, the assembly is about 9” tall, the same distance between the frame and the axle. The ride height remained the same as before using the 1” spacer! The instructions did fail to mention that a 15mm socket is needed to tighten the new hardware.
I do have a concern about the shape of the spring at the axle being unlike the oem bump stop. Why couldn’t the spring have the same contour so that deflection would be minimized? I say this because of the very close proximity of the brake lines and wiring harness to the helper spring, especially on the driver’s side. It would be interesting to film the movement of the helper spring as this vehicle is driven over rough roads to see just how close it comes to the brake lines. I’m not completely satisfied in the design, so we’ll see how this goes.
Review from a similar SumoSprings Solo in Vehicle Suspension
First of all etrailer.com has shown again they have the best customer service. There's a reason I keep going back for my truck/trailer needs.
The 1500# SumoSprings I ordered (SSR-610-47) for my Frontier installed very easily. The total install took about 20 min. Having an impact gun definitely helped. Getting the U-bolt nuts off without one would be a bear. I opted for the 1500# to assist with squatting when I pull my 5K# camper. I am using an e2 WDH but its still squatting a bit too much for my taste, these should help with that. The ride without a load is stiff but not harsh. There's virtually no body roll like there was before even with new shocks. I'm looking forward to my first camping trip of the year and will update after that trip which will be about 250 miles round trip.
Rick - 02/15/2023Review from a similar SumoSprings Solo in Vehicle Suspension
They help. My 2016 F250 feels more stable towing my 8500 pound travel trailer along with the EZ lift springs, plus Bilstein shocks.
A good combination upgrade I can afford and install myself in my driveway.
Review from a similar SumoSprings Solo in Vehicle Suspension
We pull an off-road teardrop camper with our 2013 Toyota Tacoma and were looking for a little help with the rear end sag when we have that hitched plus putting some weight in the back of the truck (firewood, water, etc). Our Tacoma is lifted (2.5") but the lift kept the stock springs with an added Deaver leaf to help with the notoriously soft Toyota springs. However, with the shell and ~300 pounds of weight in the back, it still sagged, especially with another 250 lbs of tongue weight from the trailer. The Sumos have eliminated that sag, even with bigger loads in the bed, eliminated body roll (also notoriously bad with Tacomas) and didn't destroy the ride for day to day driving. There might be a slight bit more stiffness when hitting speed bumps, but definitely not bad at all. If anything, I would say it IMPROVED the ride and handling.
The springs themselves were simple to install, less than half an hour start to finish. Some reviews have said they were bumping the frame after installing but we had about 1/2" gap on both sides. The only "specialty" tool would be a torque wrench capable of 90 lbs to get it to spec.
We considered Firestone air bags but after talking with the reps at e-trailer, we decided on these and couldn't be happier. Reasonably priced (half the price of air bags), no maintenance, great customer service...can't argue with anything at all.
Barry - 08/07/2021Review from a similar SumoSprings Solo in Vehicle Suspension
Sumo springs are good and better than helper springs. I made a mistake in ordering the type of load rating I purchased medium springs ride is stiff without load, I should’ve purchased the light springs. Overall these are excellent.
Dane - 02/24/2023Review from a similar SumoSprings Solo in Vehicle Suspension
The SumoSprings Helper springs have too much clearance between the spring and the axle. Probably because I have helper springs on the rear axle which raises the Sprinter somewhat.
Review from a similar SumoSprings Solo in Vehicle Suspension
As advertised very easy to install these Sumo Springs on my 21GMC 1500. I only installed the plate not the 1” spacer. I tow an RV and expect the ride to be more balanced and able to carry more “stuff”. Ride after install is still smooth but on larger bumps I can notice stiffness. Very satisfied right now
Review from a similar SumoSprings Solo in Vehicle Suspension
Couldn’t have been a simpler install! Total time was less than 15 minutes which included digging the floor jack out, blocking the tires and cleanup. Makes a heck of a difference in keeping the nose of the truck up when towing trailer or hauling 16 golf cart batteries.
EV T - 08/19/2021Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.