bing tracking image
  1. Vehicle Suspension
  2. Ford
  3. E-Series Cutaway
  4. 2023
  5. Timbren
FITS 2023 Ford E-Series Cutaway
Timbren Rear Suspension Enhancement System
Timbren

Timbren Rear Suspension Enhancement System

Part Number: TFERSD
In Stock
$398.07
Retail:$468.32
You Save: $70.25
Vehicle Suspension
Confirmed to Fit
2023 Ford E-Series Cutaway

E-450

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Timbren vehicle suspension for your 2023 Ford E-Series Cutaway are available from etrailer.com. Installation instructions and reviews for your Ford vehicle suspension. Expert service, and great vehicle suspension prices. etrailer.com carries a complete line of Timbren products. Order your Timbren Rear Suspension Enhancement System part number TFERSD online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (5647)
  • Q & A (0)
  • Photos

2023 Ford E-Series Cutaway - Timbren Rear Suspension Enhancement System

  • Towing/Load Leveling
  • Bump Stops
  • Timbren
  • Extra Heavy Duty
  • Rear Axle Suspension Enhancement

5,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your Ford E-Series Cutaway. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.


Features:

  • Improves suspension, handling and safety
  • Provides additional support as needed so you always have a smooth, comfortable ride
    • Allows the leaf spring ample movement while cushioning light loads
    • Becomes more rigid as more weight is added
      • Increases stability - providing great performance while hauling heavy loads
      • Reduces vehicle sag
  • Works independently - side-to-side
    • Helps compensate for off-center loads
    • Reduces body roll when swerving and turning corners
  • Acts as shock absorbers, taking the brunt of bumps and rough roads
    • Extends the life of your vehicle's suspension
  • Includes 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
    • Replaces axle bump stops on frame
    • No drilling required


Specs:

  • Capacity: 5,600 lbs
    • Do not exceed the vehicle's weight-carrying capacity
  • Limited lifetime warranty
  • Satisfaction guarantee


An example of sag on a truck's rear axle under a heavy load. The Timbren Suspension Enhancement System levels the vehicle.

When hauling heavy loads in the cargo area or by pulling a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but more of the vehicle's weight as well. Because less weight is on the front axle, the front tires are making less contact with the road. Overall vehicle handling - traction, steering, and braking - is negatively affected. The resistance from Timbren's Suspension Enhancement System works with the vehicle's factory suspension to keep the vehicle level and improve your driving performance.


Diagram of the Timbren spring installed

The Timbren system has a vehicle-specific bracket that will be bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits one inch above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride you are used to.


Animation of a standard Timbren rubber spring

Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape provides increased resistance, stiffening the suspension and keeping the vehicle level.


Timbren suspension system works to prevent body roll

Each hollow rubber spring works independently to support the driver's or passenger's side of the vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when hauling off-center loads.


An example of a trailers swaying

Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer helping to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or passing of a semi) because the movement from the trailer is not transferred to the vehicle. This also works to make the sway subside quicker.


An empty truck on a bumpy road without Timbren

Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened as the rubber springs work to prevent bottoming out on rough roads.


Compared to the competition:

Timbren's suspension enhancement systems are much easier to install than air springs - no air hoses are needed to be run, no compressors or gauges to hook up, and no manual adjustments necessary. The rubber construction causes Timbren's springs to be more elastic than similar products constructed of micro-cellular urethane. More elasticity allows for a more comfortable ride because the rubber has more travel.



FERSD - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren

Installation Details TFERSD Installation instructions

Customer Satisfaction Score:

Ratings & Reviews

4.7

3510 reviews
5 Stars
(2777)
4 Stars
(467)
3 Stars
(108)
2 Stars
(73)
1 Star
(85)
5,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

by:

Working really well, should have bought this first. Very easy to install.



by:

Very easy to install and did everything it said it would do. I'm very pleased with the quality.



by:

Excellent product. 2000 pounds in the box of my F-150, always stable on the
road.



by:

Yes I like them they do a great job and was easily installed directions was easy to follow



by:

This is my second vehicle with the Timbren system. Simple to install and they work Awesome.



by:

These have helped with squat and swaying but definitely rough the ride.



by:



by:

Install was a snap. Works as anticipated. Leveled out our 2014 F-250 very well when loaded vs without.



by:

Pricey, but effective. The ride is unaffected when not towing. While towing, there is a bit more bounce on uneven rough pavement. Great on smooth even pavement.



by:

Easy to install



by:

Very easy to install and they worked as indicated keeping the back of the truck level.



by:

Gave alot better support and ride without having to deal with adding air. Hook and go.



by:

Worked great, easy to install and I no longer get ss much bottoming out...



by:

Easy to install. can haul heavier loads without the rear squat. works great.



by:

The product was very durable and good quality, I didn't need the spacers because without them I had 1" clearance until any weight was placed on the truck. I did have use the longer bolts however to get a strong torque when tightening the rubber spring. NOW THE TEST...I hooked up my 30' trailer using my equalizer 4 point hith, looking under the truck the rubber spring was pressing on the bumper stops just enough to seat firmly. After everything was hooked up, away we went! Test drive.... I must say, the truck and trailer handled great. The truck was not bouncing when driving, it had a solid feel to it. After finding a level street to park on, I got out and looked at the trailer and truck... Perfect! Nice and level.... I hope this helps another person decide the product works. Thanks trailer.



by:

The product was very durable and good quality, I didn't need the spacers because without them I had 1" clearance until any weight was placed on the truck. I did have use the longer bolts however to get a strong torque when tightening the rubber spring. NOW THE TEST...I hooked up my 30' trailer using my equalizer 4 point hith, looking under the truck the rubber spring was pressing on the bumper stops just enough to seat firmly. After everything was hooked up, away we went! Test drive.... I must say, the truck and trailer handled great. The truck was not bouncing when driving, it had a solid feel to it. After finding a level street to park on, I got out and looked at the trailer and truck... Perfect! Nice and level.... I hope this helps another person decide the product works. Thanks etrailer.



by:

Springs hold up good really helped out with the problem. My F450 squats less than before.



by:

Eliminated rear end sag when towing and also stabilized the rear improving drivability. Highly recommend.



by:

Too stiff of a ride. Felt like an old bouncy truck with a load on. They are sitting on my garage self.



by:

Installed these on 7/6/2018. Install was pretty strait forward. Sure made a difference on the ride height. It is one of our service vehicles that we have, so we shall see if the driver of it notices the difference.



by:

Have installed product on other PU. REALLY ENJOYED ORDERING FROM YOUR WEB SITE. I hate ordering on-line but found your web site a pleasure to deal with. Great Job.



by:

Very easy to install and work great!



by:

Made my 1500 Dodge tow way more stable. took all the sway out of the truck when rolling down the highway



by:

Works like I wanted it to. It does not bottom out like it did before. It stays straight in line with camper.



by:

I love the product, usps keep pushing back my delivery date, so you should give yourself plenty of time ordering them before you need them. Other than that. Awesome.


25
3510
Show More Reviews

See what our Experts say about this Timbren Vehicle Suspension

  • Best Suspension Enhancement & Steering Stabilizer For 2023 Jayco Greyhawk 27U
    Hi Jeff, I can give you a hand here with suspension upgrades for your 2023 Jayco Greyhawk 27U, though honestly I'd go a different route than the Timbrens # TFEF350 and # TFERSD you mentioned. They'll do their job, but my goodness they can be quite rough on the ride. They are made from a very dense hollow rubber so there just isn't much "give" there and you'll feel it. The better option is definitely SumoSprings because they'll compress based on the weight being transferred so it isn't...
    view full answer...
  • Recommended Rear Suspension Enhancement For a 2023 Ford E-450 Class C Cutaway Chassis
    I recommend installing the SumoSprings # SSR-106-47-1 on the rear of your 2023 Ford E-450 Class C cutaway chassis. In my experience I feel these are the best option as they cushion the suspension while the Timbren # TFERSD you found is much stiffer and I find creates a harsher ride. Even with you mentioning your front riding great you should still consider the Front # SSF-106-47 SumoSprings as they will help when you get on roads of lesser quality. If you notice a lot of body roll you...
    view full answer...
  • Correct Timbren Suspension Enhancement for the Front & Rear for a 2008 Jayco Melbourne 29D
    For your 2008 Jayco Melbourne 29D motorhome, you'll want the Timbren Front Suspension Enhancement System # TFEF350UH for the front and # TFERSD for the rear. If you decide to go with the AirLift 5000 Ultimate Air Springs, then you're going to want the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL88242 with the air compressor kit # AL25592. If it were up to me I'd probably go with the Timbrens for just based on the fact that there is no hassle with...
    view full answer...
  • Recommended Timbren Springs For a 2022Jayco Greyhawk 29MV on Ford E-450 Cutaway Chassis
    The Timbren Rear Suspension Enhancement System # TFERSD is the system you need for your 2022 Jayco Greyhawk 29MV on the Ford E-450 cutaway chassis with J-Ride. The System # TFERSDLB has a higher capacity of 12,000lbs versus the 5,600lbs. This higher capacity will allow a lot more bounce to occur on the chassis than absorption giving you a harsher ride quality.
    view full answer...
  • Rear Suspension Enhancement Compatible With Air Lift Springs On a 2018 Nexus Viper V29 E-450 Chassis
    The Timbren Rear Suspension Enhancement System # TFERSD is the only system that you may be able to use with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88242. Since the air springs sit over the leaf springs on your 2018 Ford E-450 chassis under your 2018 Nexus Viper V29 you will not be able to use the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA34. The Timben springs mount in place of the factory bump stops under the frame rails. You will need to...
    view full answer...
  • Suspension Enhancement Kits for Motorhome Built on 2016 Ford E-450 Cutaway
    It is possible for a 2016 model year motorhome to be built on either a 2016 or 2015 base chassis so to confirm the fit of any suspension kit like Timbren # TFERSD you'll want to verify the model year of the base Ford chassis. The Timbren kit you referenced fits Ford E-450 vans up to model year 2014; it does not fit your E-Series Cutaway. We do not have Timbren kits for your motorhome but we do offer suspension enhancements including front and rear stabilizers that you can view using the...
    view full answer...
  • Recommended Timbren Rear Suspension Enhancement For 2018 Thor Vegas 24.1 Built On E-450 Chassis
    I would be happy to help! Since you already have the Timbren front bump stops installed on your 2018 Thor Vegas 24.1' Class A Motorhome built on the E-450 chassis there is no reason to replace them. I would keep them and just add the Timbren Rear Suspension Enhancement System # TFERSD to the rear axle. This will give additional support to your rear suspension, and will further decrease the sway and body roll your motorhome has giving you a more enjoyable ride. I included a video of...
    view full answer...
  • Does Timbren Kit for 2014 Forest River Sunseeker 3170DS Require Spacer
    The Timbren Rear Suspension Enhancement System # TFERSD is a confirmed fit for your 2014 Forest River Sunseeker 3170DS and does not require any additional spacers. It's perfectly setup for your motorhome as-is.
    view full answer...
  • Recommendations to Improve Front End Floating Feel & Difficultly Staying Straight 2019 Jayco Redhawk
    You are going to want to start with adding the Roadmaster Exact Center Steering Stabilizer # RM47MR to your 2019 Jayco Redhawk 26XD. This steering stabilizer helps to reduce wandering and will greatly increase the ease of keeping the steering tracking straighter with less white knuckle feel. The J-Ride suspension adds a balanced driveshaft, front and rear sway bars, Hellwig helper springs and rubber isolators to help reduce vibrations. You can also look at adding a rear suspension enhancement...
    view full answer...
  • Recommended Rear Suspension Enhancement for a Lexington Motorhome on a Ford E-450 Chassis
    Both the Timbren Rear Suspension Enhancement System # TFERSD and the SumoSprings Solo Custom Helper Springs # SSR-107-54 would be good options for your Lexington Motorhome on a Ford E-450 chassis. But with the added weight that comes with this being a Motor home on the chassis, I would recommend going with the Timbren Rear Suspension Enhancement System # TFERSD because they have double the weight capacity of the SumoSprings Solo Custom Helper Springs # SSR-107-54. The Timbren Rear Suspension...
    view full answer...
  • Determining If Timbren TFRESD Fits 2020 Jayco Greyhawk 26Y W/ Hellwig Helper Springs
    I would be happy to help you determine if the Timbren Rear Suspension Enhancement System # TFERSD you were looking at for your 2020 Jayco Greyhawk 26Y will work with the Hellwig Helper Springs. Based on the information I can find the Hellwig Helper Springs install in the leaf spring stack and do not interfere with the factory bump stop but I recommend checking if your 26Y has a factory bump stop. As long as it does the the # TFERSD will still but up perfectly. I included a video of the...
    view full answer...
  • Recommended Suspension Enhancement Product for Motorhome on 2021 Ford E-450 Cutaway Chassis
    The Timbren # TFERSD Aeon springs you'd looked at would be a fit for your motorhome on a 2021 Ford E-450 cutaway van chassis. Timbren makes a great product, but the springs are pretty stiff and my fear is that you won't be happy with the ride quality you'd have once they're installed. Instead, I'd recommend the # SS32RR SumoSpring kit. The springs included with the system provide 3000 lbs of additional support, but are more pliable than the Timbren springs so you'll have a more comfortable...
    view full answer...
  • Recommended Suspension Enhancement for 2007 Tioga M-31M on Ford E-450 Chassis
    The jounce-style suspension enhancement that is compatible with your 2007 Tioga M-31M Ford E450 305 Class C is the Timbren Rear Suspension System # TFERSD. This was designed around a motorhome chassis and offers up to 5,600 lbs of support to your OEM suspension. Please note that this (along with any other suspension enhancement) won't increase the weight rating of your vehicle, but rather it can help with up to a certain amount of weight, which in this case is 5,600 lbs. Unfortunately there...
    view full answer...
  • Front And Rear Suspension Enhancement For 1997 E-450 Lazy Daze Class C Motorhome
    For your 1997 Ford E-450 Motorhome you could use SumoSprings Solo Custom Helper Springs Front Axle # SSF-106-47 as they are confirmed to fit. However, this setup has a 1,000lb weight capacity and is meant for light duty applications. For your motorhome I think the Timbren Front Suspension Enhancement System # TFEF350UH will be a much better option. This is a heavy duty setup that is rated at 6,000lbs. For the rear suspension you could go with Timbren Rear Suspension Enhancement System...
    view full answer...
  • Will The Timbren Rear Suspension Enhancement # TFERSDLB Fit A 2008 Gulfstream BT Cruiser
    I spoke with Timbren about the Timbren Rear Suspension Enhancement System # TFERSDLB that you were looking at and was informed that these will only fit a cube van and will not fit a motorhome so you would need part # TFERSD instead. The # TFERSD is confirmed to fit and you should have a 1/2" to 1-1/2" gap when they're installed without using spacers. These should only "activate" if your motorhome is loaded up or when you hit a bump in the road. They have a 5,600lb capacity so if you were...
    view full answer...
  • Recommended Anti-Sway Bar and Suspension Enhancement for 2010 Winnebago Outlook
    The fit guide you are referencing is for the exterior. The frame and electrical components are for the chassis which is a 2010 Ford Van Chassis for the E-450. My guess is you are looking for anti-sway stabilization bars. These help reduce body roll and help you maintain control with crosswinds, passing traffic, uneven lanes, etc. I recommend the following parts confirmed to fit your chassis: Roadmaster Rear Anti-Sway Bar for Motor Homes # RM-1139-147 Roadmaster Front Anti-Sway Bar...
    view full answer...
  • Recommended Shock Absorbers / Suspension Enhancement for a 2018 Forest River Sunseeker 3050S
    William, I checked what we have and I was able to find the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281 which will work with 5,200 lb to 7,000 lb axles, and has has an easy bolt on install. We also have the Timbren Front Suspension Enhancement System # TFEF350 for the front and # TFERSD for the rear, which have a 3,000 lb capacity for the front, and 5,600 lb for the rear for a combined total of 8,600 lbs of support.
    view full answer...
  • Slide-Out Support Recommendations for a 2022 Thor Chateau 24F
    Hey Hoang, thanks for reaching out! The Hellwig Load Pro 35 Heavy Duty Helper Springs # HE72XR is for a handful of vehicles older than 2000 so it won't fit your Thor motorhome with a 2022 Ford E-Series Cutaway chassis. If you're needing more support than what the SumoSprings are offering then I recommend swapping those out with the Timbren Rear Suspension Enhancement System # TFERSD which has more rigidity. There are some of the leaf-spring style options that could fit on your motorhome,...
    view full answer...
  • Recommended Rear Suspension Enhancement For A 2006 Gulf Stream 5291B On E-450 Chassis
    Hey Gregory thanks for your question. Adding Timbrens to the rear of your 2006 Gulf Stream 5291B Cruiser is definitely going to help reduce suspension sag. The # TFER35092B that you mentioned is only for the E-250 and E-350 models since they are only rated for 3,600 lbs. Since yours is an E-450 we do recommend going with something a bit more heavy duty. My recommendation is the Timbren Rear Suspension Enhancement System # TFERSD, which is rated for 5,600 lbs. This kit is basically intended...
    view full answer...
  • Which Timbren Kit Fits 2017 Thor Freedom Elite 26HE
    Hey Alex, yes the Timbren rear suspension kit part # TFERSD that you referenced is a fit for your 2017 Thor Freedom Elite 26HE.
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Robert C
Installed by:
Robert C
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Anna W
Updated by:
Anna W
Employee Michael B
Updated by:
Michael B
Employee Carrie F
Updated by:
Carrie F
Employee Lincoln B
Updated by:
Lincoln B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Daniel D
Video by:
Daniel D
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<