To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
2,000-lb Capacity. Lowered trucks have a weakened load capacity and reduced suspension travel. SlamAir adjustable air springs beef up your suspension, improving ride comfort, preventing bottoming out, and increasing overall safety.
Features:
Specs:
So you've lowered your truck, and it looks fantastic. However, you realize that your load capacity and suspension travel have deteriorated in the process. You're bottoming out more, and your ride simply isn't as comfortable as it could be. With SlamAir you can have the great look of a lowered truck while maintaining beefed-up suspension. You get a smooth, safe ride and prevent bottoming out. Now your vehicle will be as strong as it was when you drove it off the dealer's lot.
Enhancing your lowered truck's suspension with SlamAir provides your vehicle with up to 2,000 pounds of load-leveling capacity. SlamAir can accommodate most trucks with a 2- to 6-inch drop, as well as those with flipped axles and notched frames. The air springs themselves are adjustable from 5 to 100 psi, ensuring that you achieve the exact pressure levels that you need for any activity. And the springs can be inflated independently of one another for front-to-rear and side-to-side leveling.
SlamAir comes with manual inflation valves that are typically mounted on the bumper but can be installed anywhere on your vehicle for easy access. For even more convenience and control, you can add a compressor and gauge system (sold separately), which will let you monitor and automatically inflate your air springs.
Air Lift kits are designed to keep your vehicle at normal ride height. You can find the normal ride height of your vehicle by unloading it and measuring the distance between the bottom edge of your wheel well and the center of the hub. After you find and record this distance, you can regulate the amount of air that you put into your air springs to maintain normal ride height - even when you are hauling a heavy load. You will need to adjust the air pressure in your air bags according to the size of your load.
The SlamAir kit includes easy-to-use air line fittings, springs, brackets, air line tubing, inflation valves and all necessary hardware. SlamAir also comes with a limited lifetime warranty with no mileage restrictions.
California residents: click here
Thank you
Looks like described and very happy tha nks
Used it with a mcgaughys c notch, fit f ine.
Easy to mount works great
Worked perfect for my 2006 f150 on a 3/5 drop. Towed a camper with it no problems
Self-installed product one year ago. Still working great and would recommend this product.
It was very easy to install especially since I already had a C-Notch done in the back with an axle flip. With this added on I no longer band the axle against the bottom of the bed floor.
Great fit. Work perfectly for what I needed. Quick shipment also from etrailer.com
Great product works really well
Installed these on a lowered 2014 f150 to help when I tow my boat. The directions aren’t very good and the install was a pain as far as mounting the top bracket to the Frame. My frame rails weren’t flat so the top brackets took some work to get them correct. Overall they do what was expected and seem to be ok so far. I’ve only driven for about 50 miles at the moment.
Works well, great product! Was sold the wrong set on the first purchase. This was the second purchased. I asked for a discounted purchase because it was wring and was able to use the wrung ines in my other truck. Never heard back and the purchase was completed without any discounts.
I purchased this setup for my lowered truck so I can continue towing without worrying about bottoming out. Fast shipping and simple installation.
Kit fit great , I have a 6/9 drop on my 95 cc dually and on the stock 16s with 245/75 there is plenty of clearance, I haven't had time to test fit my dk tuck 22s yet but I'll hopefully know in a few weeks. I did tow a loaded car trailer this weekend and it towed awesome with about 75 psi it never hit the notch and rode very nice. I'll keep playing with air pressure to find the perfect unloaded psi but coming home after dropping the van and trailer off I dropped them down to about 33 psi and it still rode great where before I was bottom out in the bolt in notch all the time
The kit came with everything needed and seems to be good quality. My application didn't quite work as it should because of my weld in cnotch, but still performs how it should. Great kit.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.