Alpena Blue Fast LEDs - Interior Exterior Lights - 24"

Video Transcript for Alpena Vehicle Lights - Accent Light - ALP77326 Review

Speaker 1: Today we're taking a look at some Blue Fast LEDs.Now, these light strips are great for your vehicle. They can be used for interior or exterior applications. Each strip itself measures around 12" long, and with this part number, this kit offers 15 different light patterns to choose from. It also has this little switch that's included, a little mode switch. That way, you can easily switch between each pattern.Now, I already have it hooked up, ran the wiring. Real quick, I just want to go over that.

The yellow wire is basically the wire that keeps the two light strips synced together, so make sure that that stays intact, and that that is connected to each light strip. Then on each strip itself, you're basically going to have two wires that you need to make sure that you have connected, ran together. One's going to be a black wire with a white strip. That is your main power wire. The other one's just a plain black wire, and that's your ground wire.

All the other wiring, like the little gray wire, that runs to the mode switch.It's a nice easy design. It's easy to get installed. We have 28 LED chips per strip. LEDs last a really long time. They also have a very energy efficient design to them, and this unit is water-resistant.

On the back side, it does come with the 3M self-adhesive backing for an easy installation. Also, we have adhesive backing on the mode switch so we can easily locate that to an easily accessible location.It's a cut-to-fit application, so it does have little cut marks that shows where you can cut it if you want to split up each strip. It's a flexible design so that way you can easily maneuver it around a corner or around a bin or at an angle. Again, easy to install, and it is compatible with any 12-volt system.I'm going to turn off the overhead lights and go through the patterns real quick so you can get a good idea of what you're getting. To switch between the patterns, all you have to do is ...

the switch. I'll just cycle through these. And you can always hold down the mode switch for a few seconds to reset it back to that first pattern.That's going to do it for today's look at the Blue Fast LEDs.