Alpena LED Fog Litz 4
(6 reviews)
Price: $47.30
Alpena LED Fog Litz 4
Item # ALP77160
Retail:$49.99
Our Price: $47.30
You Save: 5%
Orders above $99 qualify for Free Shipping
Need help with installation?
Locate installers near me- All Info
- Reviews (6)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Alpena Fog Lights - ALP77160
- Upgrade Kits
- Wide Beam
- 6L x 2W Inch
- Rectangle
- LED Light
- White
- Pair of Lights
- Alpena
Features:
- 4 high powered 6000K LEDs per light
- Water resistant
- Weather sealed lenses
- 90-Day warranty
A bright and powerful solution for extra auxiliary lighting, Fog Litz 4 feature high-output LED chips for a pure white light. Complete with mounting brackets, Fog Litz 4 can provide a variety of vehicles featuring 12V systems with additional light. A weather proof housing is finished in a chrome varnish and mounting hardware is included.
77160 Alpena LED Fog Litz 4
Video of Alpena LED Fog Litz 4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Alpena Off Road Lights - Pair of Lights - ALP77160 Review
Today we're going to be taking a look at part number ALP77160. These are the Alpena LED fog lights. Each light is going to feature 4 high-powered 6000K LEDs. We're going to have a nice water-resistant design. It's going to have weather-sealed lens. Each light is going to be identical.
We're going to have a really nice chrome plastic trim piece that's going to add a nice look that just goes around the clear lens right there. On the back of each light we're going to have our wiring and we're going to have our mounting bracket. That's already going to be preattached. You're going to have your mounting bracket, your wiring, you're also going to get the installation hardware. It comes with the mounting brackets, it comes with the mounting hardware.
This is a universal application so it's designed to mount on most vehicles. The unit is designed for 12-volt systems. The wiring that's coming out of the back of the light's going to measure bout 56 inches long. That's going to be per light. Let's take a look at the mounting bracket real quick. We're simply just going to go over that measurement.
If we take a look at the length from edge to edge, we're looking at about 3-5/8 of an inch. Measuring from top to bottom, we're looking at about an inch. If we measure from the back of the housing to the end of the bracket, that's going to measure about one inch as well. You can see how the bracket has numerous mounting holes along there and they're elongated. These are universal mounting brackets.
The overall length of one of the lights, again they're both going to be identical, measuring from edge to edge, you're looking at about 6 inches. If we take a look at the height, it's going to be about 1-7/8 of an inch. If we look at the depth, not including the mounting bracket, that's going to give us a depth of about 2 inches. If we extend the mounting bracket out, measuring from the front of the light to the back of the mounting bracket, that's going to extend it. It looks to be about 2-5/8 of an inch. Again, brackets, lights, and mounting hardware is included. We're going to go ahead and turn it on. That way you can see what it looks like with power running to it. One more thing I want to show you is that these brackets do pivot so once you get them in the angle that you want, simply just tighten down the hardware on the side and that's going to stiffen that up to make sure it doesn't rotate around on you when you're using them or when you have them fully installed. The wiring is going to be a two wire design. You're going to have one black wire with a white strip on it. That's going to be your power wire. The other wire is just completely black. That's going to be for your ground connection. We'll go ahead and make those connections. We can turn off our overhead lights and turn on our power source. You can see here that the lights send out a nice, consistent signal. These are LEDs. LEDs are going to be much more efficient. They're going to last longer and they're going to burn brighter when compared to incandescent lights. Each light on this unit is going to contain 4 high-powered 6000K LEDs. That's going to do it for today's look at part number ALP77610.
Customer Reviews
Alpena LED Fog Litz 4 - ALP77160
Average Customer Rating: 3.0 out of 5 stars (6 Customer Reviews)
by: Ricky01/06/2018
This is a review from one year later. At least 6 months ago, I removed these lights from my truck. Both lights were burned out completely. They lasted less than 6 months. First one of them quit working,,, then about 3 weeks later the other one quit. I sent a email to e-trailer looking for some help with a bad product and feeling like I failed to get what I paid for, with no reply.
by: Charles04/19/2018
Very bright should work great as backup lights
by: James 08/17/2018
The lights look great. They really grab your attention when they're on and flashing! We will need for people to see us on the side of the road so we won't get hit. We're going to be changing tires and doing light mechanical work on commercial trucks.
by: Ron Lehrman10/26/2019
the manufacturer suffers from design and /or quality control deficiencies. The product failed at a very low time in service. I suggest you cease selling it.
by: Doug S.03/04/2020
too dim
by: T. Brooks03/02/2016
The product is excellent and arrived timely.
6
6
See what our Experts say about this Alpena Fog Lights
- Could the Alpena LED Fog Litz 4 # ALP77160 Fit 1997 Ford ExplorerThe Alpena LED Fog Litz 4 # ALP77160 are a universal style of fog lights that are designed to attach with the swivel bracket mounted at the rear of the light. I am confident these could install on a Ford Explorer like yours but they would most likely not fit as a type of factory fog light replacement.
view full answer... - Can Alpena LED Fog Litz be Installed Directly into Existing Fog Light WiringYes, the Alpena LED Fog Litz, part # ALP77160, can be wired directly into your existing fog lights. This way they'll turn on the same way your current fog lights already do. These are a two wire design. The black wire with a white stripe is the power wire and the solid black wire is for ground. I've attached a review video for you as well.
view full answer... - Fog Light Recommendation for a 2000 Honda Civic DXThe fog lights that we carry are not vehicle specific so you could use any of them on your 2000 Honda Civic. To find ones that will fit the area in which you need them you will need to compare the light dimensions to the dimensions of the area you want to place them. I see a lot of round fog lights on Civics. We also have some LED lights, # ALP77160, which are 3-5/8 inches long by 1 inch tall. It just all depends on the space available.
view full answer... - Can I Use Oval LED Brake Light CR-017 As Fog LightThe Oval LED Brake Light Trailer Hitch Receiver part # CR-017 is designed to light up when the brake lights are activated. There is not a way to re-wire the light to allow it to accept power all of the time without damaging the light. You can use the Alpena LED Fog Litz 4 part # ALP77160 which are designed to accept 12V power and come with brackets to install them. I have attached a video for your reference.
view full answer... - Resistor Used for LED Fog Lights Does Not Last LongI think I have a better solution for your LED lights. Instead of reducing the current (and it would be stepping down the amperage, not the voltage) you could put more load on the system so that the LED lights will work. You just need some load resistors such as # DI34ZR.
view full answer... - Fog Light Recommendations for a 2015 Nissan Altima SedanWe have some universal fog lights that you can install on your 2015 Nissan Altima but no custom options are available. You just have to go by the size of the opening where the OEM fog lights would be. Alpena LED Fog Litz 4 Item # ALP77160. They are 3-5/8 inches long by approximately 1 inch tall and about 1 inch in depth. We also have Fog Light Kit - Halogen - 55 Watt - Oblong, 5" x 2-3/8" - Clear Lens - Qty 2 Item # QH-84CF which are 5 inches long and 2-3/8 inches tall.
view full answer... - How to Install the Alpena LED Fog Litz 4 Part # ALP77160 with a Toggle SwitchI do have a way for you to install the Alpena LED Fog Litz 4 part # ALP77160 on your 2010 Mazda CX-7 but unfortunately I cannot recommend you use them inline with your low-beam headlights as you would likely exceed the maximum amp draw allowed for that circuit. In order to install the fog lights on your CX-7, I recommend using them with a toggle switch such as the LED Micro Bug Push Button Toggle Switch part # PL-SW28B. In order to install the fog lights with a toggle switch you will need...
view full answer... - How To Install Alpena LED Fog Lights With A Toggle Switch On BoatThe Alpena LED Fog Litz 4 # ALP77160 are fairly simple to install with a toggle switch, just make sure you are connecting them to a 12V battery of some sort. I recommend wiring it to the Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads # PK34513 and using Deka Heat Shrink Butt Connectors (10 pack) # DW05743-10 for your connections. Attach the negative wire on the fog lights to the negative terminal on the battery (or bare metal for ground connection). Then connect...
view full answer...
Do you have a question about this Fog Light?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate fog light information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Hannah L
Written by:
Jacob W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.