1. Trunk Bike Racks
  2. Nissan
  3. Pulsar
  4. 1988
  5. Kuat
FITS 1988 Nissan Pulsar
Kuat Highline 2 Bike Rack - Trunk Mount - Adjustable Arms - Silver

Kuat Highline 2 Bike Rack - Trunk Mount - Adjustable Arms - Silver

Item # HIT2S
lowest price pledge
Our Price: $198.00
Trunk Bike Racks
Confirmed to Fit
1988 Nissan Pulsar

All Models

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 15 lbs
In Stock, Ships Today
HIT2S - Adjustable Arms Kuat Trunk Bike Racks
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

The best technical support and full trunk bike racks installation instructions. Lowest price Pulsar trunk bike racks guarantee and expert service. Nissan Pulsar, 1988 trunk bike racks by Kuat are available from etrailer.com. For expert service call 800-298-8924 to order your Kuat Highline 2 Bike Rack - Trunk Mount - Adjustable Arms - Silver part number HIT2S, or order online at etrailer.com.
  • All Info
  • Reviews (1)
  • Q & A (8)
  • Videos (2)
  • Photos
  • Why etrailer?

1988 Nissan Pulsar - Kuat Highline 2 Bike Rack - Trunk Mount - Adjustable Arms - Silver

  • 2 Bikes
  • Kuat
  • Adjustable Arms
  • Hanging Rack
  • Locks Not Included
  • 6 Straps
  • Frame Mount - Anti-Sway
  • Non-Retractable

Trunk bike rack offers the style and functionality of Kuat with no need for a hitch or roof rack. Simply strap the rack to your Nissan Pulsar's trunk to carry 2 bikes. Arms fold down for parking clearance, and the rack fits over most factory spoilers.


  • Trunk-mounted rack lets you carry 2 bikes on the rear of your vehicle
  • Anti-sway cradles prevent bike-to-bike and bike-to-car contact
    • Ratcheting nylon straps secure your bikes' top tubes and seat tubes to the rack
  • Independently adjustable dual arms provide excellent support and help to keep bikes level during transport
    • Depress lever, move arm to desired position, and release lever
    • Fold arms down when not in use
  • Base adjusts with thumb tabs to match the shape of your vehicle
    • Rubber-padded upper and lower supports protect your trunk from scratches and scuffs
    • Rack fits over most factory spoilers
  • 4 Clear, adhesive vinyl strips included to provide additional protection from scratches
    • 4 Blue guide markers help you set precise location for strips
  • 6 Cam-buckle straps with rubber clips anchor the rack to your trunk or hatch
    • Clips are labeled to indicate mounting position on vehicle
  • Extruded aluminum construction is strong yet lightweight
    • Less likely to wear down and loosen when compared with plastic racks
  • Rack folds flat for compact storage in your trunk or garage
  • Silver color


  • Carrying capacity: 2 bikes
  • Weight capacity: 35 lbs per bike
  • Distance between arms (outside cradle to outside cradle): 9-3/4"
  • Arm length: 16"
  • Carrier weight: 13 lbs
  • Limited lifetime warranty

Approved for use on cars, trucks, vans, and SUVs

Note: This dual-arm rack reduces the need for a bike frame adapter bar (sold separately) to mount a children's, women's, or alternative frame bicycle. However, to mount certain bikes or to keep your bike level on the rack, a bike adapter bar may be required. Most step-through bikes, dual-suspension bikes, and small children's bikes will require a bike adapter bar.

Kuat Highline 2-bike

This premium trunk rack provides the look and functionality you expect from Kuat without the need for a roof rack or hitch to install it. And it doesn't just look great, it's also super easy to use. The frame is adjustable so the rack fits on most cars, and the arms are individually adjustable so you can carry nearly any style of bike. It installs and removes quickly and easily, and you can fold it up and lock it safely in your vehicle while you ride.

Anti-Sway Cradles with Ratcheting Straps

Kuat Highline 2-bike

The rack has anti-sway cradles that help prevent bike-to-bike contact during transport. The cradles pivot out of the way to make it easy to load and unload your bikes.

Kuat Highline 2-bike

Your bike frames are protected by soft rubber pads that absorb road shock and vibration. The padded cradles have ratchet straps that make it easy to secure your bikes. Simply insert a strap into the buckles on each side of the cradle and pull it tight around your bike's frame. To remove your bikes pull out one side of each strap by pressing the release lever on the side of each anti-sway cradle.

Folding Dual Arms

Kuat Highline 2-bike

Dual arms provide excellent stability for your bikes. Integrated levers let you adjust each arm to ensure your bikes are level during transport and to help improve ground clearance.

Kuat Highline 2-bike

These levers also allow you to quickly fold the arms down when you're not carrying any bikes. This is great for parking in places where space is limited such as a parking garage.

Easy Installation

Kuat Highline 2-bike protective strips

The rack includes 4 clear, adhesive vinyl strips to protect your trunk from scratches and scuffs. Set the rack on your vehicle and stick the included blue guide markers on the 4 points of contact. Remove the rack and replace each blue guide marker with a vinyl strip.

Kuat Highline 2-bike

The Highline installs quickly and easily on your trunk or hatch. Place the bottom of the rack on your bumper well, and press the levers to adjust the angle of the upper arms to match the shape of your vehicle. When the legs are in the desired position simply release the levers to lock them into place.

Kuat Highline 2-bike

6 Straps with rubber-coated hooks attach the rack to your trunk or hatch. The hooks are labeled "Upper", "Side", and "Lower" for easy orientation on your vehicle. A glass hatch kit (sold separately) is available for installation on a vehicle with narrow gaps around the hatch or trunk, or with glass or plastic hinge lines that aren't compatible with standard S-hooks or J-hooks.

Kuat Highline 2-bike

To secure the rack, simply attach the 6 hooks and pull the straps tight through the integrated cam buckles. Hook-and-loop fasteners are also included so you can bundle excess strap length to keep it from flapping against your trunk.

Fold For Compact Storage

Kuat Highline 2-bike folding

When not in use you can fold the rack flat for compact storage in your trunk or garage.

HIT2S Kuat Highline 2 Bicycle Trunk Mounted Strap Rack - Silver

Installation Details HIT2S Installation instructions

Video of Kuat Highline 2 Bike Rack - Trunk Mount - Adjustable Arms - Silver

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Kuat Highline Trunk Mount 2 Bike Rack Review

Speaker 1: Today we're going to be taking a look at the Kuat Highline Trunk Mount Two-Bike Rack, part number HIT2B.The Kuat Highline is a premium trunk mount bike rack that's easy to install. We've got the black installed here today, but it's also available in silver with part number HIT2S. Now, you can get both colors in a three-bike version. For the silver, it's part number HIT3S, and for the black, it's part number HIT3B. It's going to allow us to carry a wide variety of bikes regardless of the frame or size. You can see here we've got a mountain bike and a road bike.The Kuat Highline is not only going to work with your sedans, but it's going to work with your SUVs, your minivans, and your crossovers.

Now, because the Kuat Highline makes contact with the bumper, you will not be able to open up your rear hatch. It holds our bikes with three points of contact. We've got two ratchet-style straps for our top tube and one for our seat post tube. The one for our seat post tube is going to be our anti-sway. It's going to help prevent bike-to-bike contact and bike-to-vehicle contact.

The straps themselves are easy to operate. This is a step up compared to other racks that might have a rubberized strap. Instead of having to pull down and stretch out that rubber over the anchor, this one you just simply press on the tab and then we can guide that strap out. Then we can just take our bike off.With the bike removed, you can see our rubberized cradles. This is going to help keep the bike in position and protect it when we're on the road.

Now, they're not as large as some other bike racks' cradles and they're also in a fixed position, so they're not adjustable along the dual arms. Let's go ahead and take the second bike off so we can touch on some bike spacing.Now, a nice feature that I like about this bike rack is that the anti-sway cradle pivots out of the way for loading and unloading. That way we can easily guide our bike on and off the rack. Now, the dual arms are about 8" apart center on center, so this will really come in handy for those bikes that have tighter frames compared to other bike racks that have a wider setup. When the dual arms are not in use, they fold down individually for compact storage.

You'll operate the switch on top, fold it down until they snap in. This is ideal for pulling in your garage or in a tight parking space.Now these have four different positions. We have our first one, which is our stow position. From there, we have three other options depending on how we have it set up for our vehicle. For our current vehicle, our arms are slightly elevated, which is what we want, but as you could see, they can go up two more times. Now this position may look ridiculous, but as I said, if you have it on a different vehicle, this may be correct.Let's talk about it how it attaches itself to your vehicle. It has six straps total, three for each side. Each strap has a rubber-coated hook, that way it won't harm or scratch our finish. It's also labeled, that way we know where to position them. They're all cam buckle straps. They're extremely easy to use. You just pull to tighten them up, and what I really like is that they include keepers. That way, we don't have to worry about tying our straps or cutting them. The upper and lower supports feature a rubber padding. This is a step up compared to other bike racks that just have a foam roll. Those can deteriorate over time; this will hold up. Now that we've gone over the features, I'll go ahead and show you how to get it set up.I've got it in its folded position now. This will be the best way to stow it in your garage. To get it set up for our vehicle, I've got it turned around. This is our upper support. Right here we've got two tabs. Go ahead and use our thumbs to press in on those, and then we can open it up. We'll set our lower support on our bumper. The upper support is going to rest on our trunk. Now we need to be sure that our tab on each side snaps in place once we have it set up, just like that.With it in position, now let's run our straps. Now, it's a good idea to have them all undone and loosened up. That way at the end we can go through, tighten them up, and then bundle everything up at once. We'll start by grabbing our upper hooks first, labeled "upper." We're going to connect that at the top portion of our trunk, and we're not going to tighten them too much just yet. Just put a little bit of tension on that strap; that way it's going to hold it in place.For our side hook, you want to be sure and stay away from your tail lights. In this case, we'll either want to go above or below. If we choose to hook it on a tail light, we may end up tearing it up or cracking it. For our particular vehicle, we'll actually need to slightly open up the trunk and put in our side hook. That goes the same for our bottom hook. Let's go ahead and do that. Slightly open it up, put it in place. While I've got it here, I'll want to tighten it up just a little bit so it stays, and then for the bottom we'll do the same. Now you want to do that for both sides before you close your trunk.With all the hooks connected, let's go ahead and tighten everything up. Now you want to start with the lower straps first. The easiest way to do this is to pull down with the loose end and then lift up with the other end. That way you get the most out of it, and you want to do that for both sides. Once those are tight, you'll then want to do the upper straps, and then finally the sides. Now let's bundle everything up. So we'll keep it fairly small near the buckle. Then we'll use the hook-and-loop keeper to contain it all. We'll repeat the same process for the other five straps.Now, if you'd like, Kuat has included some protective film that we can place underneath our supports for their protection. For demonstration purposes, we will not be using these. With everything tightened down, you could see it's nice and solid. It's not going anywhere. Now we can get ready to load up our bikes, so we'll need to raise up the dual arms. Then we can undo our straps. We'll fold down our first anti-sway cradle and undo it's strap. Now we're ready for our first bike.Now, it's recommended that you load up the heaviest bike first. For us, it's going to be our mountain bike. We'll want to set a position and we'll want to rotate our pedals out of the way, so it doesn't make contact with our vehicle or our bike rack. Now, you want to be sure that it sets against our anti-sway cradle nicely just like this, and we'll run our strap around the seat post tube and then back through pulling it nice and tight. For our other straps, it's just over the top and down through. With both bikes loaded up, we can go ahead and take it out on our test course and see how it performs.Here on our test course, let's first go into our slalom. This is going to show side-to-side action such as going around corners or evasive maneuvering. Then we'll move onto our solid speed bumps. This is going to show an up-and-down action such as pulling in and out of a driveway or out of a parking garage, and then, finally, we'll go over our alternating speed bumps. This is going to show a twisting action such as going over a pothole or uneven pavement.Now, if you're loading up a children's bike or a woman's bike or any other bike that may have an alternative frame style, you may require the use of a bike adapter bar. This is what's going to allow the bike to sit evenly on the dual arms. Kuat makes one. See etrailer.com. The whole truck-mount bike rack is made out of an extruded aluminum, so it's going to be very strong and lightweight at the same time. It has a weight capacity of 35 pounds per bike and features a limited lifetime warranty.Customers on our site compare this to the Yakima HalfBack Trunk Mount Two-Bike Rack, part number Y02636. Where they differ is the HalfBack is only a four-strap mounting system, whereas the Kuat Highline is a six-strap system. This means that the Kuat could make for a more stable transport for your bikes. That's going to complete our look at the Kuat Highline Trunk Mount Two-Bike Rack, part number HIT2B.

Customer Reviews

Kuat Highline 2 Bike Rack - Trunk Mount - Adjustable Arms - Silver - HIT2S

Average Customer Rating:  4.0 out of 5 stars   (1 Customer Reviews)

Trunk bike rack offers the style and functionality of Kuat with no need for a hitch or roof rack. Simply strap the rack to your vehicle's trunk to carry 2 bikes. Arms fold down for parking clearance, and the rack fits over most factory spoilers.


Review from a similar Kuat Highline in Trunk Bike Racks

Fit well on ‘12 charger. A little tough to get clips between trunk and rear fenders. Felt like bikes weren’t going anywhere once it was on. 612495


Ask the Experts about this Kuat Trunk Bike Racks

  • Trunk-Mounted Bike Rack Recommendation for 2007 Honda Fit
    There are a couple great options for a trunk-mounted bike rack on a 2007 Honda Fit (so long as it is not a Sport model of '07 Fit). The trunk-mounted bike rack I highly recommend for your 2007 Honda Fit is the Kuat Highline. This is available as a 2-bike rack # HIT2S (Silver) as well as a 3-bike rack # HIT3B (Black) or # HIT3S (Silver). The Highline is unique in that it features four clear protective strips which you will put on the rack where it contacts your Fit. These strips keep...
    view full answer...
  • How to Transport Bikes With 2018 Lexus RX 450h L
    There is not a trailer hitch that is a fit for a 2018 Lexus RX 450h L and there is really no way to know if one will be added, although you can still transport your bikes with the use of a trunk-mounted bike rack. So long as your '18 Lexus RX 450h L does not have a spoiler I strongly recommend checking out the Kuat Highline 2-bike rack # HIT2S because of its combination of quality and aesthetics which makes it unique among trunk-mounted bike racks. This rack excels at keeping your...
    view full answer...
  • Trunk Mounted Kuat Bike Rack for 2019 Honda Fit
    Kuat does make trunk-mounted bike racks and they will work on your 2019 Honda Fit! The Kuat Highline is the name of the rack and it is available as a 2-bike rack # HIT2S (Silver) as well as a 3-bike rack # HIT3B (Black) or # HIT3S (Silver). The Highline is unique in that it features four clear protective strips which you will put on the rack where it contacts your Honda, which totally protects your car. This rack attaches to your Honda with six cam-buckle straps that have padded hooks...
    view full answer...
  • Does Trunk Mount Bike Rack Need to be Removed for Hatch Access on a 2011 Honda Element
    Yes, you will need to remove the Kuat Highline 2 Bike Rack # HIT2S from the trunk of your 2011 Honda Element before opening up the tailgate and upper door. This is the same case for all trunk mount bike racks on any vehicle. If you are wanting to have unrestricted access to the rear hatch area of your Honda Element without removing your bikes or bike rack then you can install a trailer hitch and use a swing-away bike rack. For this application I recommend the Draw-Tite # 75659 which...
    view full answer...
  • Recommended Trunk Mount Bike Rack for 2019 Honda Civic Sedan
    For a 2019 Honda Civic sedan I strongly recommend checking out the Kuat Highline which is available in Black # HIT2B or Silver # HIT2S and will fit '19 Civic sedans that are not the Si model. This anti-sway cradles on the rack ensure your bikes won't come into contact with each other or your Civic and it has easy-to-use folding arms for storage that only require the press of a lever. On top of its features, the Highline is just a really cool looking rack no matter if you go with...
    view full answer...
  • How to Carry Bikes With 2008 BMW M3
    While there is a solution for you to carry cargo with your 2008 BMW M3, the Draw-Tite Trailer Hitch # 24857 will not fit your vehicle; I checked with the hitch manufacturers for you and there is not a trailer hitch that will fit your car. That said, if you are simply looking to use the hitch in order to carry bikes with your '08 M3 you can do so whether it is a Coupe or Sedan with a trunk-mounted bike rack and I highly recommend the Kuat Highline for this because it excels at keeping...
    view full answer...
  • How to Transport a Bike at the Back of a 2016 Chevy Spark EV
    Unfortunately none of the trailer hitches we have to offer will fit your 2016 Chevy Spark EV. We do have roof rack options if what you are needing to carry is lighter. Just let me know and I can make a recommendation for you. Otherwise if you're set on a trailer hitch you will need to have one fabricated for your specific vehicle.
    view full answer...
  • Trunk Mounted Bike Rack Recommendation for 2016 Volkswagen Jetta
    SeaSucker does offer the Komodo part # 298-BK1910-BK which is a fit for your 2016 Volkswagen Jetta but the Falcon is only for truck bed. I realize that's quite a large price difference so you might instead like the Kuat Highline 2 Bike Rack # HIT2S which is an extremely high quality bike rack that fits your vehicle and costs less. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter...
    view full answer...

Do you have a question about this Trunk Bike Rack?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trunk bike racks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trunk bike rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video by:
Andrew K
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Dustin K
Test Fit:
Colin H
Installed by:
Hayden R
Written by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924