To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Customers prefer these similar products
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to be taking a look at TorkLift's line of custom frame mounted camper tie downs for the front. You want to verify here at etrailer.com using our fit guide, which ones work best for your vehicle. There are sets also available that will fit your vehicle available for the rear. These custom mounted brackets are going to provide an easy attachment point to hook up your camper.What's additionally great about those is that they have the removable ends. So when you're not using it, they'll be hidden away, and your vehicle will look like factory. The custom mounted brackets we're engineered to provide you with the best location for your tie down point to even distribute the load.
So, once they're attached, and adjusted. This'll keep your camper from being too top heavy. This'll increase the overall ride quality while you're campers attached, and the safety. It's made of a durable steel with a black powder coat finish, which'll ensure that you have a strong attachment point, and it'll be highly resistant to corrosion.When you are ready to use them, you can just slide in the attachment point. There's two points here to attach your turn buckles, and here on the shaft there are two points that will give you an adjustment inward, and outward, to specifically fit your camper.
So, you can use this hole for a wider camper, or this hole for an aero camper. Once you've got your appropriate hole, slide the pin through, and bring the latch over, and lock it in place. Then you can attach your turn buckles.Now if you need some turn buckles you can pick them up here at etrailer.com. There are many a different styles. From chain types, to quick attach lever types.
Our style is going to a be a threaded rod type that will hook to your camper, and down to our attachment point. We'll adjust it snug by turning our turn buckle here. With our passenger side done, we'll repeat that same step on our driver's side.Compared to stake pocket, our bumper mounted camper tie downs, frame mounted tie downs will provide better handling. They also mount out of sight, giving your truck a cleaner look, because the custom fit brackets secure tight against your trucks frame there is no loss of ground clearance. That completes our look at TorkLift's line of custom frame mounted camper tie downs for the front..
Average Customer Rating: 4.7 out of 5 stars (1746 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.