bing tracking image
  1. Truck Bed Tie Downs
  2. Erickson
  3. Tie Down Anchors
  4. Stake Pocket Application
  5. No-Drill Application
Erickson Flip-Up Stake Pocket Anchors - Black Epoxy Coated Steel - Qty 2

Erickson Flip-Up Stake Pocket Anchors - Black Epoxy Coated Steel - Qty 2

Item # EM01009
lowest price pledge
Our Price: $18.40
You Save: 13%
Truck Bed Tie Downs
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.89 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Durable, epoxy-coated steel stake pocket anchors help secure your load. Flip-up design makes the loops easy to use. Mounting screws are included for no-drill installation. Lowest Prices for the best truck bed tie downs from Erickson. Erickson Flip-Up Stake Pocket Anchors - Black Epoxy Coated Steel - Qty 2 part number EM01009 can be ordered online at or call 800-298-1624 for expert service.
  • All Info
  • Reviews (20)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Erickson Truck Bed Tie Downs - EM01009

  • Tie Down Anchors
  • Stake Pocket Application
  • No-Drill Application
  • Erickson

Durable, epoxy-coated steel stake pocket anchors help secure your load. Flip-up design makes the loops easy to use. Mounting screws are included for no-drill installation.


  • Stake pocket anchors serve as tie-down points for securing your load
    • Works with trucks, vans, boats, and trailers
  • Flip-up design keeps the loops upright for easy use
    • Loops fold back down when they're not needed
  • Durable black epoxy-coated steel construction is corrosion-resistant
  • Easy, no-drill installation
    • Mounting screws are included


  • Quantity: 2 anchors
  • Base dimensions: 3-3/4" long x 2-1/4" wide
  • 90-Day warranty

01009 Erickson Flip-Up Stake Pocket Anchors - Black Epoxy Coated Steel - Qty 2

California residents: click here

Video of Erickson Flip-Up Stake Pocket Anchors - Black Epoxy Coated Steel - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Erickson Flip-Up Stake Pocket Anchors Review

Hi there, haulers. Today we're going to be taking a look at Erickson's flip-up stake pocket anchors. These are available either in chrome like you see here or black. Here you can see we've got our tie-downs installed, and we've got them in use. They're flipped up with our ratchet strap on them, holding our trash cans in place. They do come in a quantity of two, so we've got one for each side.

If you need another set for the rear of your truck, you can pick up another set. They're easy to install. You just drop the bottom plate down inside, and then when you tighten down the screws, the bottom plate and the top plate will clamp onto your stake pocket around the edge. There is no drilling or cutting required, just falls down on that stake pocket. Couldn't be any easier.So if you're looking to maximize the hauling capabilities and the safety of your truck, this is going to be a quick and easy way that's going to look great when it's installed as well.

Adding additional tie down points, especially here on top of the rails, can be nice for keeping that cargo inside your bed, especially you guys that have cargo nets. This is an easy way to hook those up and drape right over the top real fast. And if you'd like a cargo net or some ratchet straps to go along with it, Erickson has plenty available here at All of our tie-downs are going to be a steel with either a black or chrome plating on it to help protect it against corrosion, and underneath we'll have a gasket that will ensure that we don't cause any scratches or abrasions when installing it into our stake pocket here on top of our bed rails.You can see here compared to my thumb that our Ranger here has got some pretty small stake pockets. They do fit on here.

You might have to get your brackets in at an angle. We'll go ahead and show you that now. We'll begin our installation with the bottom plate lightly threaded on with our screw going down to the top. This is pretty much how it comes in your package here. You can put both screws in, but depending on your truck, depending on how large your stake pockets are, you may or may not be able to install it with two screws in it.

On our Ranger here, the stake pockets are a little bit too small for that. So we just have a single screw in it, and we're just going to drop the plate down inside of the hole.Then we can take the other screw and install it. To make it easier, you can run the screw up some. That'll just draw that bottom plate up closer, so when we drop the screw down, we've got some excess on top to be able to line it up with the hole and thread it in. Once you've got both screws started, we're then just going to choose the orientation of our stake pocket. We're going to have ours so that it flips up towards the inside of the bed, and then we're just going to run these screws down. We don't need to go crazy with them. We're going to go back and forth, tightening them down evenly. Then we'll just repeat the same process here on the other side. And that completes our look at Erickson's flip-up stake pocket anchors.

Customer Reviews

Erickson Flip-Up Stake Pocket Anchors - Black Epoxy Coated Steel - Qty 2 - EM01009

Average Customer Rating:  3.9 out of 5 stars   (19 Customer Reviews)

Durable, epoxy-coated steel stake pocket anchors help secure your load. Flip-up design makes the loops easy to use. Mounting screws are included for no-drill installation.

- EM01009

Works fine, still using them. I selected this model because I can lift the tabs and my tri-fold vinyl tonneau cover still closes allowing me to strap down a kayak. Way more affordable than a purpose built tonneau and rack system.

- EM01009

Top mount screws rusted quickly, but the tie downs work

- EM01009

I'm very happy with these tie down hooks. They were very easy to install, simple and clean. It didn't take me but 5 minutes per slot at the most. Working with e trailer was just fine also.

- EM01009

They were Super after I had to do a slight modification due to top rail covers I had, not the Flip up design. unfortunately My Ram 2500 was destroyed in the Beachie Creek Fire in September, Planning to reorder new ones when I get another p/u they were so great!

- EM01009

Looks like it will work for me

- EM01009

This is my second order for this product. After the first order, I was pleased enough with the product to order another set for my truck. My only complaint is with the flip up ring. The ring is supposed to snap down flat into the base when not in use, however, only 1 of the 4 I received snaps into place and *stays* in place. The others snap down and then pop back up about 3/16" above the black anchor frame. That's not what I expected or wanted, but it is better for me than those anchors that are fixed in the upright position all the time. Interestingly, I believe it is the design of this device that is flawed. My local big box home goods store has the chrome version of this anchor (under the store brand.) I checked all the anchors on the shelf and they all pop back up, as well. As to installation, I found that my anchor frame fit flush on my bed rail after I turned over the plastic gasket. The gasket as two tabs (on the short sides) and I found that turning them over, so the tabs are down, centers the gasket and anchor frame over the stake pocket perfectly. Perhaps I am installing them incorrectly, but with the tabs sticking up (as they are shipped) there is a gap between the top of my bed rails and the bottom of the anchor frames. Doesn't make any sense to me why they ship with the tabs sticking up.

- EM01009

Very easy to install and appear to be very sturdy.

- EM01009

One of the screws/brackets was galled. I had to buy a tap and tap out the bracket and buy another screw as well. I'd give the pieces a 2.

- EM01009

This item does not fit 1993 or older trucks. Not without modifying the stake pockets. The D rings do not fold down completely.

- EM01009

The flips arrived on time and undamaged. During installation it was necessary to make sure that the clips were snugged down equally or the clip would not stay recessed. Took some patience but they are installed and working properly.

- EM01009

Great product easy installation loved this big time.

- EM01009

Product is great looking. I installed on a 2019 Ford XLT Sport F150 Pickup Truck in about 10 minutes. Product functions as designed and looks great.

- EM01009

I purchased these to cover the stake bed holes when I remove the bed rack that I currently have installed. They seem to be well made.

- EM01009

Products are just fine for now, time will tell if they will last

- EM01009

Started to rust almost immediately, within a month. After 3 months it would no longer snap shut. I have since replaced it

- EM01009

Does not fit my truck

- EM01009

Item fit well, but does not lay flat.

- EM01009

Very happy with them!

- EM01009

- EM01009


Ask the Experts about this Erickson Truck Bed Tie Downs

  • Will the Erickson Flip-Up Stake Pocket Anchors Fit a 2019 GMC Sierra 1500?
    I have a solution for you. I confirmed with my contact at Erickson that the Erickson Flip-Up Stake Pocket Anchors # EM01009 will not fit your 2019 GMC Sierra 1500. However, I did confirm with Extang that the Extang CargoCleats Truck Bed Tie-Down Anchors # EX1932 will fit. The CargoCleats attach right onto your truck bed's rail system as opposed to the stake pockets. If you wish to provide me of the stake pocket measurements from your 2019 GMC Sierra 1500, I would be happy to find a stake...
    view full answer...
  • How to Determine if Erickson Flip-Up Stake Pocket Anchors Fit 2021 Ram 1500
    The Erickson Flip-Up Stake Pocket Anchors are not a vehicle-specific fit, they are a universal type of application, but I can tell you how to determine if they fit the stake pockets of your 2021 Ram 1500. These anchors have a base that measures 3-3/4" long x 2-1/4" wide with the lower bracket that fits inside the stake pocket measuring 2-1/8" x 2-1/8". So you will need to measure the stake pocket to ensure the base can cover the pocket and the lower bracket can fit inside the pocket;...
    view full answer...
    Image 1 for
  • Recommended Stake Pocket Tie-Downs for a Toyota Tundra
    The Erickson Flip-Up Stake Pocket Anchors part # EM01009 are not vehicle specific so there would be no way to confirm fit beforehand. However, Erickson has stated in the past that similar styles did not work. Instead, I recommend the Truck Bed Stake Pocket Chrome Anchor Points part # 92509 which have a much more universal design therefore should work on a Toyota Tundra. They can always be painted black if that is what you prefer.
    view full answer...
  • Flip Up Stake Pocket Tight Downs For A 1995 Chevrolet Silverado C/K Series Truck.
    Flip up stake pocket tie down compatible with the 1995 Chevrolet Siverado C/K series pickup is going to be the Erickson Flip-Up Stake Pocket Anchors - Black Epoxy Coated Steel - Qty 2 Item # EM01009. If you prefer chrome just use Item # EM01006. The base dimensions are 3-3/4" x 2-1/4" so I recommend double checking the size of the stake pocket opening on your bed to make sure it will cover.
    view full answer...
  • Stake Pocket Tie Downs For A 2009 Chevrolet Silverado 2500
    For your 2009 Chevrolet 2500 I recommend the Erickson Flip-Up Stake Pocket Anchors - Chrome-Plated Steel - Qty 2 Item # EM01006. These offer a tie down loop that sits inside the plate when not in use. The loop flips up to provide a nice large loop to make it easy to attach a hook to. They are also available in black under Item # EM01009.
    view full answer...
  • Which Stake Pocket Anchor Tie-Downs Will Fit My 2021 Ford F-150?
    The Erickson Flip-Up Stake Pocket Anchors # EM01009 that you were looking at may fit your 2021 Ford F-150. The base plate, which sits on top of your stake pocket, measures 3-3/4" long and 2-1/4" wide. The bracket, which fits inside the stake pocket, measures 2-1/8" long and 2-1/8" wide. Based on the measurements you gave me, it sounds like your stake pocket will work for the base plate; you will want to measure the inside of the pocket to determine if the bracket will be able to fit in....
    view full answer...

Do you have a question about this Truck Bed Tie Down?

  • Why

    At we guarantee:
  • Highest quality truck bed tie downs for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate truck bed tie down information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Mary E
Written by:
Mary E
Employee Matthew S
Updated by:
Matthew S
Employee Manda E
Updated by:
Manda E
Employee Amanda M
Edited by:
Amanda M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-1624