Stake Pocket Tie-Down Anchor - Zinc - 2" D-Ring - 1,600 lbs

Brophy Truck Bed Tie Downs - T55Z

Corrosion-resistant zinc-coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip, so you can quickly and easily remove and reinstall it as needed. 5,000 lbs Maximum load.

Features:

• Stake pocket anchor provides a tie-down point in your flatbed truck or trailer
• Movable anchor slides into a standard 2x4 stake pocket
  • Can be easily removed and reinstalled as needed
  • Secures in place with included pin and clip
• D-ring is hinged, which allows straps to be attached from different angles
• Zinc-coated steel offers excellent corrosion resistance
• Made in the USA

Specs:

• Safe working load limit (WLL): 1,600 lbs
• Maximum load (break strength): 5,000 lbs
• Inner diameter of D-ring: 2"
• Anchor dimensions:
  • 5-1/4" Tall from the bottom of the mounting plate to the bottom of the anchor
  • 3-1/2" Wide
  • 4-1/4" From the bottom of the mounting plate to the top of the pin hole
• Top plate dimensions: 3-1/2" long x 2" wide
• Pin diameter: 1/2"
• Quantity: 1 stake pocket tie-down
• 1-Year warranty

Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.

T55Z Brophy 3-1/2 Inch Anchor for Two-by-Four Trailer Stake Pockets - Zinc - 5,000 Pounds