Keep your truck bed organized and prevent loose items from sliding around with this bulkhead tray. This universal tray installs on any truck and is compatible with all tonneau covers. Tray is constructed of durable, vacuum-formed plastic.
Features:
Specs:
Bulkhead Tray Helps Organize Your Truck Bed
The TruXedo Truck Luggage bulkhead tray is the perfect storage solution to keep your truck bed organized. Don't worry about tools or small items sliding around the bed of your truck while you're driving anymore. This convenient tray keeps loose items off the truck bed floor and easily installs on any truck make or model. The bulkhead tray also works in conjunction with any tonneau cover and installs under the cover's mounting hardware.
Adjustable Leveling System Locks Tray in Place
Metal screws on the back of the tray tighten by hand to clamp the tray to your bulkhead. These screws also fill the gap between the back of the tray and bulkhead, allowing the tray to sit level on any size truck from any manufacturer. The ends of the screws are outfitted with plastic tips to secure the tray firmly in place, keeping it from sliding across the bulkhead while you're driving. The plastic tips also protect the bulkhead from scratches or from tearing your truck bed liner.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Truxedo Bulkhead Tray for truck beds. This is going to be a universal tray to catch any of those smaller items inside your truck, so they're not sliding around. It's going to be nice and low profile, so that it will fit underneath most tonneau covers. It is designed to work with Truxedo's Tonneau covers, but pret much anything that doesn't mount directly to the bulkhead of your truck, this can fit on. It pret much just goes over that bulkhead channel, and then there's a couple of little spacers to take up the gap there, and provide some leveling aspect to this. You can just thread those out until your tray is at the level that you want it since that will push against the front of the bed, and level out your tray.
It's pretty easy to install, really no hardware to worry about.You'll notice on the bottom of the tray, there are a couple of holes. That's to let any water or dirt drain through. It's not going to be anything that's going to catch water and be a basin there. It's constructed of a durable, vacuum formed ABS plastic. ABS just means that it's going to be a more durable plastic than your typical construction.
Again, it's a pret easy install. As far as our dimensions, it's going to be 24 and a half inches long, by 12 and a half inches wide, and six and a half inches deep, going from the top to the basin. As far as the lip, that is going to be about four inches. The inside length is going to be about 22 and a half inches, at the widest point. And going the other direction, it's about eight inches wide.
Again, that's the inner dimension there.It works with a bulkhead with a maximum width of two and seven-eighth inches. Most truck beds you should be good there. Just slides right over, you adjust those metal screws to get your leveling right. There is a little rubber tip on each one so you don't have to worry about those digging into our truck bed itself, or causing any scratches there. Overall, pretty easy way to keep all your gear organized and contained.
That's going to do it for our look at the Truxedo Bulkhead Tray for truck beds.
Do you have a question about this Truck Bed Storage?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.