Heavy-duty truck bed slide makes it easy to reach gear in your vehicle. A steel-framed, nylon-laminated plywood deck extends to 100 percent of its length on 36 rollers. 8" Walls and a track system with anchors contain cargo. Drop links included.
Features:
Specs:
Note: Because of the size of this item, it ships via truck freight.
The CargoGlide heavy-duty sliding tray helps you access equipment quickly. No more crawling around on your knees or bumping your head on a camper shell as you search for tools hidden in the back of your truck bed. Just pull out the tray and all your stuff is within easy reach. The shelf holds a hefty 1,500 lbs of gear, and the built-in tie-down tracks help you strap down your cargo. The CargoGlide is perfect for do-it-yourselfers, contractors, and hunters.
The 34 carrier rollers and 2 side rollers make it a cinch to pull heavy loads in and out of your vehicle.
The tray slides easily, even if your truck is tilted sideways. The side-thrust rollers under the CargoGlide make contact with the tray when your truck is parked on an angle and keep the tray gliding smoothly along the tracks. So if you need to park on the side of a hill or in a ditch, the sliding shelf will operate without binding.
The CargoGlide has a locking point every 12" so you can pull the tray out in stages. Extend the shelf a little or a lot using the various locking positions. When fully extended, the tray pulls out to 100 percent of its length. This allows you the most access to your cargo.
To slide the tray out, reach under the front faceplate where the red lever is located. Pull the lever to either side to release the tray so it will slide out. When you're done for the day, just push the tray back in and it will lock in place for travel.
The tray has a rust-resistant black powder coated steel frame. The deck is nylon-laminated to provide skid resistance. This decking weathers well and fights abrasion. It's engineered to resist damage from chemicals and water, and the non-skid surface helps keep your gear from sliding around inside your vehicle as you drive.
This tray has removable, 8" tall side and rear walls that extend three-quarters of the way around the tray. They keep your cargo from sliding off the tray and bumping into the sides of your truck. The walls are lower at the front so you can easily reach in from either side of your truck to grab gear.
The tray will remain rock steady as you load or unload tools and equipment - the sturdy construction means it won't bend, warp, or twist under a load. The CargoGlide tray can also be tilted up and removed from its track if you need to make room for tall loads.
The CargoGlide 1500XL also has a built-in tie-down system that helps control your cargo. A track runs along the side and rear rails of the tray to give you lots of options for securing your load.
The tray comes with 4 steel O-ring anchors that can be positioned along the track to create tie-down points for your cargo. Each tie-down track anchor point has a 650-lb capacity.
This tray is perfect for bulky cargo that's difficult to unpack. Load and unload firewood, bags of mulch, and heavy-duty equipment with ease.
Tossing your bikes in your truck bed usually leads to a tangled mess of handlebars and bike pedals that's hard to unload. Install a fork-mount bike rack (sold separately) on the tray, and you can easily pull out the tray and unload your bike without getting a pedal to the kidneys.
The pre-assembled tray bolts securely to your vehicle's bed with included hardware.
The included drop links let you lengthen your factory tailgate cables so your tailgate sits lower when fully opened. This allows the CargoGlide to slide freely without making contact with your tailgate. Each link attaches to one of your truck's existing factory tailgate links. There should be a minimum of 1/8" clearance between your tailgate and bumper after the drop links are installed.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Heavy-duty truck bed slide makes it easy to reach gear in your vehicle. A steel-framed, nylon-laminated plywood deck extends to 100 percent of its length on 36 rollers. 8" Walls and a track system with anchors contain cargo. Drop links included.Review from a similar CargoGlide 1500XL Truck Bed Sliding Tray in Truck Bed Slide
I won't own another pickup with a topper on it without installing a CargoGlide.
It is the best upgrade I have ever done.
Thank you CargoGlide for the 100% slide out version. I would not go with anything less.
Do you have a question about this Truck Bed Slide?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.