To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Protect the bed of your truck from damage while also helping to keep your loaded cargo in place. This sturdy, flexible liner is made of UV-resistant thermoplastic for strength and durability. Custom fit for your vehicle.
Features:
Specs:
Keep your truck bed free of dents and dings with the WeatherTech TechLiner. This rugged, durable liner is made of a thermoplastic elastomer that resists both UV rays and cold weather. Designed to maintain its form and flexibility over time, the TechLiner provides excellent protection for both your truck bed and your loaded cargo. Slide in ladders, lumber, equipment and gear with ease and without having to worry about scuffs and scratches. The non-skid material and built-in, contoured channels work together to help keep your cargo from shifting, providing extra peace of mind.
The raised edges of the TechLiner contour perfectly to the sides of your truck bed, even around the wheel wells. This design not only adds a little extra protection, but it also ensures a custom fit and a sleek, flawless look. To get even more coverage for your truck bed, add a tailgate TechLiner (sold separately).
Average Customer Rating: 4.5 out of 5 stars (179 Customer Reviews)
Protect the bed of your truck from damage while also helping to keep your loaded cargo in place. This sturdy, flexible liner is made of UV-resistant thermoplastic for strength and durability. Custom fit for your vehicle.A weather tech fail. I’m going to try one more time to deal with those poorly designed plastic top strips and then it goes in the garbage.
The only weather tech product I don’t care for.
I purchased the tailgate protector. The material is soft and pliable. Unfortunately,the plastic washers that come with it are too small and therefore soon after installation, the protector peeled away from the tailgate at the top where it uses the washers to keep it in place. I ended up using some larger diameter washers to keep it secure. It fits well, and now does a great job of protecting my tailgate.
Installation was a bit different than two previous bed mats I've installed on F-150s. Once I figured it out, it was good. May have to add a couple pieces of double-sided tape at the rear to make sure it stays down.
Thanks for the quick shipment. as well as keeping me informed on the process, shipping and delivery of the item. job well done
Nice, easy to install liner protects tailgate from dents scratches and other damage!
We received this item in a damaged box that was taped up on one end and busted open on the other end with the mat dirty and warped hanging out of the box. I don't know who to blame the damage on but we are not happy with a damaged product. It is dirty and looks like it may have been used and placed back in the box. I'm expecting this problem to be corrected.
The TechLiner is a great product. It fit perfectly and looks awesome. You do need to let it sit in the sun for a couple hours to flatten out. This liner does velcro to your truck bed and may be a hassle if you feel a need to remove it for cleaning very often.
Overall the bed liner was easy to install, the fact that it was designed to fit the bed of my specific truck and had a good fit and finish was important to me.
Another nice attribute is that the liner extends up the walls of the bed and does not simply end at the bottom of the bed. This helps keep snow and water and debris away from the bed itself.
The service I received from etrailer was above and beyond and exceeded my expectations.
Jena called me to update me on a change to my order, then followed up twice to let me know the item had shipped.
Highly recommend etrailer !!
Too thin, edges curl up and non skid poor things slide around in bed
Installation was quick and easy. It fit well and appears to be durable.
It’s very light duty and difficult to clip in. Clips get caught up on any cargo your sliding out .
It looks nice new but not very functional if you use your truck bed.
Could easily be made better. The material is great but they could improve the interface with the upper lip of the tailgate and include MORE hook and loop. Also, even though it's fairly obvious, they don't mention using the shoulder washers when screwing it down.
Up until about a week ago, the bed liner was working just fine, but then the adhesive holding several of the Velcro strips failed or wore out, and the liner caught air and pulled away from the rest of the Velcro and flew out of the bed. I had to pull over to retrieve it from the roadway. I've tried applying some more adhesive, but it still gets air under it, so I had to remove it completely.
Was easy to install. Secured by factory bolts in tailgate. Looks nice no issues.
The liner is thinner than expected.
It was a perfect fit. I did need to lift the plastic end of the tail-gate, then drill holes for where the tabs go through, thus making the strip they send along unnecessary. I'm thrilled with the way it looks.
Great product, Great price. Fast delive ry.
Tailgate liner was thinner and more flexible than I anticipated, but the material seems tough. It has held up well to heavy use.
La verdad me gustaría regresarlo pero ya lo corté para acomodarlo No vale$ lo que cuesta. [Truthfully I'd like to return it but I already cut it to fit. Not worth the cost]
Stays in place,makes loading heave things much better because it protects the tail gate.Easy to clean up.
Fast service, excellent quality product, easy instructions and fits perfectly!!!
This product will not install on a tailgate that has a spray on bed liner applied. The mat will not fit under the supplied clips. I drilled out all the holes and just used the existing tailgate hardware to attach it. Poor design by WeatherTech. I recommend etrailer to not carry this product.
I pretty much trust everything Weather Tech, but this product missed the mark. It was EXTREMELY difficult to install. It uses a long plastic "C" clip along the upper edge of the tailgate to hold down the mat. You're suppose to install the clip and then slide the mat in from one end, even with lube it wouldn't slide in. I've been working on my own cars for 50 years. It took me quite a while to get the mat into the "C" clip. Then you have to move it back and forth some to line up the screw holes that are reused in the tailgate.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.