BedTred Impact Truck Bed Mat - Trucks w/ Bare Beds or Spray-In Liners - Thermoplastic

Review from a similar BedTred Impact in Truck Bed Mats

First off, I would give etrailer 5 stars, they are awesome. This bed liner however is not what I expected. It is about 3/4 inches thick but is like a closed cell foam rubber skinned with a thin layer of hard plastic on top. It is molded to fit the bed corrugations which is nice but has a lot of "give" to it. The liner is hook and loop into the bed and is VERY light. The tailgate extension is sealed to the main liner which I like. The tailgate cover is hook and loop onto the tailgate as well. That part is not long for this world for a work truck as the exposed edge at the top of the tailgate is just that, exposed for all heavy objects to snag on the way into the truck bed when the tailgate is opened. The cover also does not sit flush with the center of the tailgate, it sort of bulges so to speak. I had figured I would use the tailgate access panel attachment screws to better hold the cover into place but the cover is so soft fear it would just look like junk. The main mat itself is short of going all the way to the sides by quite a bit, maybe an inch or so all the way around. Given they molded the bottom to fit the corrugation, they could have easily molded the bottom to fit the curvature of the bed sides/bottom and continued the mat another 2-3 inches on left and right sides to protect better. I chose to use the mat as I made my bed so to speak but in the past, the hard, firm rubber mats and hard plastic screw down liners for tailgates have served me perfectly. Time will tell and if this cover works better than I fear, will happily correct my review. Again though, etrailer is an awesome company to work with. 465500

Review from a similar BedTred Impact in Truck Bed Mats

Perfect 544390