To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This marine-grade truck-bed mat is the embodiment of tough: waterproof, resistant to rips and stains, and made to last. It's easy to install, and the snap-on, snap-off design is perfect for quick removal and reinstallation on your vehicle.
Features:
Specs:
Thick enough to prevent big loads from leaving nasty scratches and dents but light enough to remove and reinstall with ease, the Access truck-bed mat offers your vehicle's bed the ultimate in protection and convenience.
Whether you're at work or at play, this 1/2-inch-thick, marine-grade bed mat is perfect for keeping your payload from sliding or shifting while you are traversing rugged terrain. The mat snaps into place in your truck bed, so it won't slide as you're loading and unloading cargo. Made of high-quality, waterproof polyester that is constructed entirely from recycled plastics, it resists stains, rips and mildew. This mat is built to stand up to the wear and tear of heavy-duty loads and brutal weather.
While a particularly vital feature, durability is not all that the Access truck-bed mat has to offer. With its lightweight construction and convenient snap-on, snap-off design, it is also super easy to maintain. After a long day of hard work or rough play, all you have to do is pop the mat right out of your bed and then hose off, sweep, or powerwash away the dirt and grime. This ensures a clean-looking truck bed no matter how much you put it through.
Your Access truck-bed mat can be installed with a drill or without, according to your preference. The included drill-in snaps require that you drill six small holes in your truck bed. Then attach a male snap to each hole with a screw and simply snap on your bed mat. Alternatively, you can opt for a drill-free installation using the set of adhesive snaps included in this kit. With the adhesive snaps, you fix six peel-and-stick male snaps to your bed and then snap on your truck-bed mat. Both options work with bare beds or beds with drop-in or spray-on liners. However, it is recommended that you use the drill-in installation kit if you have a drop-in liner.
The Access truck-bed mat is easy on the knees, easy to install, easy to maintain, and durable enough to stand up to almost any activity. It's the perfect mat for protecting your bed from damage that may occur when you are hauling loads for a big job, taking the essentials to the lake, or tailgating at the next big game. If you're looking for high-quality protection and convenience, this mat is for you.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (36 Customer Reviews)
This marine-grade truck-bed mat is the embodiment of tough: waterproof, resistant to rips and stains, and made to last. It's easy to install, and the snap-on, snap-off design is perfect for quick removal and reinstallation on your vehicle.Read carefully!! I looked up a rubber mat and this was the only one they had that fit my truck…. It isn’t rubber. My fault for not reading the description. Looks to be a quality product even though it isn’t what I wanted.
Works great. Awesome fit to the bed floor and around wheel wells
It does like to absorb water so watch out for rain.
This mat's quality is very good, however it did not match my 2009 Tacoma truck bed, so instead of going through the hassle of returning it, I got out my utility knife and scissors and made it fit. The cutouts for the wheel wells didn't match so I had to do some trimming there. The holes for the anchor "D" rings didn't match either so I had to cut new ones, so after all these adjustments everything worked out ok for me. I am satisfied with the final install. This should confirm that this product does not fit a 2009 Tacoma pickup bed!
Have mixed mentions the quality and easy install of the snaps was great but the price not so much $[XX] for basically a 1/2 piece of foam kinda of tuff on the wallet .
I called because my bed is 6ft and you show online a 7ft bed one also why is the 6ft bed one $[XX] and 7ft $[XX] ? When I called and talk to a phone sales person she said she couldn't change the price .
Great product and install but def not worth $[XX]
A very good fit, it comes with screw down snaps to hold the mat in place, just unsnap like a jacket to clean or put heavy equipment in your Maverick pick up bed.
Mat is good but not perfect. I did not use the snap-in clips and the mat is very thin.
A thicker rubber based mat would be better in my opinion.
Its sits well in my Pro4X bed and does not slide and has protected the bed for the whole year.
I would buy it again but .... Ribber a little thicker would be better
My last truck bed mat was 1/2 inch thick rubber and weighed a lot, so there was no trouble with it flying out at highway speed. This one, not so much. It is more like a piece of industrial indoor-outdoor carpet. Because of the light weight, it must be fastened in place with (included) snaps. These require drilling 11 holes in the bed of your truck. NO WAY on my 2013 F-150 with only 80 miles on it. However, there is another snap kit which has small pieces with adhesive that you glue down to the bed, then snap in the mat. I decided to go this way, since the truck is brand new and I'm not convinced about the durability of the mat. We'll see . . .
Great priduct
Really like the pad, however, the snaps do NOT hold it to the bed. Ended up purchasing heavy duty [hook-and-loop] tape and putting it on all the corners and middle. Has held with the [hook-and-loop] now for a year.
The Mat was reasonably priced and adds protect for the bed as well as my knees. Also, it is easily removed for cleaning. I would recommend this product. The profile is low enough that I can still place items in the bed and still close the Tonneau cover.
Feels good it could stand to be a tad shorter in length it can be cut but I elected not to at this time. I like the fact that it snaps in I used the screws on the buttons since I had a spray in bed liner which is a rough surface for the stick on snaps . Just put a camper shell on yesterday .
I have had my bed mat lines installed for a year now. The bed mat itself is a decent carpet over neoprene material, but the snaps are not that great. The middle side snaps lined up with the top of the bed ribs, but the middle lined up in between ribs so it pulled loose in a week. They use a sticky back tape to mount, and are about 3/8" contact area. They should have been made with a full 1 inch contact area to last better. Over a year they all ended up pulling loose. Finaly, the metal top snaps that are attached to the mat were ruined moving a washing machine, so there is no recover from that. The mat slides around now, and will blow out of the bed someday, unless I keep it weighed down.
I like the mat, it fits great but it is very light and should be attached to the bed per the instructions. If it was heavier I would give it 5 stars
Great! The snaps all have broken off but outside of that great!
Should have order tailgate cover also, but I like.
Great product. Could have used a couple of more
snaps, however, very happy with the mat.
GOOD SERVICE AND SALEMAN VERY PROFESSIO NAL
Has really held up very good I’m impressed will buy again
Very durable and easy to maintain
Delivered almost overnight great job gu ys
Quick shipping, great price, fits perfect, easy to install.
Do you have a question about this Truck Bed Mat?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
4/19/2024
I am sorry for any misinformation. Per the manufacturer, these are made with a marine grade carpet that is made out of recycled plastics.