Shed some light on the situation with this high-density LED light strip. The flexible strip bends so you can put it in a corner or anywhere else you need light. The bright white LED lights are great for use with a tonneau cover or camper shell.
Features:
Specs:
No more feeling around in your dark truck bed for tools or cargo. The white LED lights on this high-density strip add bright, even light along the length of your truck bed. This flexible strip bends to fit in a corner or anywhere else you need light. The 3M adhesive tape on the back of the light strip keeps it securely in place and makes installation a snap. Turn your lights on and off using the blue push button located on the cord at the end of the light strip.
The lights wire into any nearby 12-volt electrical source using a two-prong electrical lead that connects to a power source and a ground. If you tap into a tail light, this weatherproof light strip works only when your running lights are on. You can also hardwire the lights to your battery using added wiring (sold separately) so that they have constant power. Wire the light strip in by soldering or using a quick splice wire connector (sold separately).
These truck-bed lights are a must-have if you use a tonneau cover or shell on your pickup or UTV. Install them in your boat, van or trailer to light up dark spots. Let there be light - exactly where you need it most.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Access 60-inch LED Truck Bed Lighting System. Now this is a 60-inch long bright light, LED light strip that'll light up your truck bed. It is a flexible, high-density strip that can bend around corners and it is waterproof so it will withstand exposure to the elements. You can turn it on and off with a push button right here near the end of this strip. And it installs very easily. It includes the electrical leads with the power and ground wires.
You just tap and do a nearby 12-roll power source like your tail lights. Now if you do want constant power to this, you do want to run this wire to your vehicle's battery. It does attach securely with the pre-applied 3M adhesive tape on the back here. So it's perfect for truck beds that have inaudible 00:00:44 covers or camper shells. That'll work in most vans, trailers and motor homes.A few specs on this again.
The quantity is one light strip. The light strip total length is 60 inches. Now the length of the power wire is about 36 inches, so basically what you want to do to install this you'll just clean the area first where you want the light strip attached. And then what you'll do peel this protective layer from the 3M adhesive strip and then attach the tape to where you want it to go. Now also on the switch it does have tape on it also, so if you want to attach that down you can.Your electrical wire will have a red wire that goes to your power source and then a black wire, which goes to your ground.
So what I'm going to try to do here is hook this up to a 12-roll power and just show you how bright it is. I'm gonna go ahead and turn off the overhead lights . It sounds like we got that all hooked up. Go ahead and turn off the overhead lights and then I'll push the button and you can see with the button pushed how bright it is and how long it is. So you can just attach it to wherever you want to wrap it around.
And again, to turn it off, you just push the button again, turn it back on. Turn on the overhead lights. But that should do it.For the review of the Access 60-inch LED Truck Bed Lighting System.
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
Shed some light on the situation with this high-density LED light strip. The flexible strip bends so you can put it in a corner or anywhere else you need light. The bright white LED lights are great for use with a tonneau cover or camper shell.Excellent product
very easy to intall
Great products. all good.
Installed in the canopy of truck after I broke the existing single bulb unit. Works great, lots of bright white light, fits flush to the aluminum trim just above the canopy door hinge, no issues with durability.
All in all, I very happy with it.
Product as described. Have 2 in truck bed just below the bed rail near the rear of the truck so the buttons are easily accessible and they provide plenty of light under my bed cover. Even with bed cover off these 2 lights provide 3-4 times or more the light of stock cargo light. The buttons are weatherproof and the tape is very secure. Great product. Will purchase again when I require similar light demands.
I installed this LED strip light in my rear boat storage area , it really lit it up. I can actually see what I am doing back there now.
Do you have a question about this Truck Bed Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.