Bully Clamp Truck Bed Movable Tie Down (Pair)

Bully Clamp Truck Bed Movable Tie Down (Pair)

Item # WTD-823

lowest price pledge

Retail:$40.16

Our Price: $28.61

You Save: 29%
Truck Bed Accessories

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.19 lbs

Quantity: 
In Stock, Ships Today
Pilot Automotive Tie Down Anchors - WTD-823
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Tie Down Anchors
  • Rail Application
  • Pilot Automotive
  • No-Drill Application
Bully Truck Accessories Bully Clamp Movable Truck Anchor Point Lowest Prices for the best truck bed accessories from Pilot Automotive. Bully Clamp Truck Bed Movable Tie Down (Pair) part number WTD-823 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (71)
  • Q & A (35)
  • Videos (2)
  • Photos
  • Why etrailer?

Pilot Automotive Truck Bed Accessories - WTD-823

Bully Truck Accessories Bully Clamp Movable Truck Anchor Point


Features:

  • Tie down mounts anywhere under a truck bed's side rail.
  • No drilling required.
  • Qty: 2





WTD-823 Bully Clamp Truck Bed Movable Tie Down (Pair)







Video of Bully Clamp Truck Bed Movable Tie Down (Pair)


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Pilot Automotive Truck Bed Accessories - Tie Down Anchors - WTD-823 Review

Today we are going to show you part number WTD-823 from Bully, the stainless steel truck clamp. This is a nice device that clamps onto any position along the bed of your truck to allow you to tie down virtually at any point on your truck. These clamp onto the actual inside lip of the truck bed and you can use this inside camper shells and a lot of tonneau covers too. We will go ahead and install one here and show you how it works. We will stick it inside our bed rail here, you want the clamp open, put it up in there, and make sure it goes up as far as possible. We will get this out of our way, and then there is a bolt at the bottom here which we will tighten up by hand and we will use a ratchet to tighten it up the rest of the way. There you have it, an instant tie down point. There you have it for part # WTD-823 the stainless steel truck clamp.


Customer Reviews

Bully Clamp Truck Bed Movable Tie Down (Pair) - WTD-823

Average Customer Rating:  4.7 out of 5 stars   (71 Customer Reviews)

Bully Truck Accessories Bully Clamp Movable Truck Anchor Point

- WTD-823
by:

This product works great. Use rope or ty down straps or a carge net. 246910


Comments

They work great. Totally happy with the product

Walter S - 04/26/2017

23417

- WTD-823
by:

Works great and easy to install 250794



- WTD-823
by:

These are nice clamps. Just what I was looking for. I attached them near the center of the siderails of my F150. The thin wall thickness of the plastic rail caps necessitated that I use the "special" installation method for thick walls. So the first one took five minutes. The other one took about 30 seconds. They are stainless steel. I assume the bolt is also stainless, but I'm not sure about that. I was a little disappointed to see the names of American companies on the package, but also "Made in China". I used to work in stamping companies in Michigan that could easily make these. One of those companies went bankrupt during the recession. I feel a little guilty, but these were the only camp-on tie-downs that I could find. 148761


Comments

Its been a year now. Ive used them only for kight duty so far. They work great.

Tim - 08/26/2015

14573

- WTD-823
by:

For my use these are the best tie downs. They are a little pricey but you get what you pay for. I used these on my other truck for 7 years and they still worked and looked like new. Other tie downs need to be installed in the pockets and that doesn't work for me, these can be placed anywhere on the side rails which offers more flexibility. 116571


Comments

A year later and still using these tie downs. I use them to tie down loads of hay in the bed of my truck. They are the only ones I will use from here on out. Great product.

Michael M - 02/16/2015

9544

- WTD-823
by:

We had the tie downs installed at the same time they installed our new trailer hitch. They had to cut our bed liner a bit but it still only took 30 minutes and looks great. We are very happy with this product. It meets our needs. Our used truck did not have built in tie downs and this was a great substitute. We use it weekly to haul garden waste to our local dump and this will make it so much easier! 471624



- WTD-823
by:

Great product, just won’t work with my application. I have a “SnugTop” shell on my 2009 Dodge Ram 2500 and the way the shell forms not only to the top of the rail it also forms around the inside lip making it too thick for this to work. Too bad because the potential is there, I tried it on my trailer with 1/4” thick angle and it would work but barely. Maybe Bully Clamp could offer two clamps, one for the 0”-1/4” like I received and a larger 1/4”-1/2” for applications similar to mine. Hope this helps, this is a well made product as long as it attaches to the rail only with “nothing” else in between. 473373



- WTD-823
by:

I have a 2017 Ram 3500 Crew Cab Dually truck. I looked high and low for some anchor that did NOT require any drilling....finally found the Bully Clamp. Installed 6 of them in about 10 minutes!! Very durable product. Very happy with them. 432724



- WTD-823
by:

Bought these because the toolbox is cover the front holes. These are mounted just aft of the toolbox and work great. The quality of these are great and easy to install. The space between the toolbox and where I mounted these is for the Swagman bike rack to fit right in there. 320452



- WTD-823
by:

Timely delivery. I bought 2 pairs of the anchors. Once I figured the proper size ratchet, the install proceeded easily in my 2003 Dodge Dakota with a bedliner. The only snag was that I got them mounted and then went to put the tonneau cover back on but its clamps fell in the same spot as the anchors. So a quick loosening , relocating 3 inches and retightening and problem solved. Since the truck only had 2 tie down points, both at the tailgate end of the bed so these anchors will supplement those. 479285



- WTD-823
by:

These tie down anchors seem to be worth the money. It was a little difficult to adjust properly , but that is most likely due to the fact that they are designed to fit most brands and models. They held the load securely in place. I also like the that I can use either "S" hooks or large diameter rope with no problem. 434074


Comments

I enjoyed the truck bed tie down clips. They came in handy on many occasions. Unfortunately, I traded the truck in for a new one in August and forgot to remove the tie downs out of the bed...currently missing them with the new truck. The Andersen camper levelers work as advertised. Im very pleased with them. They make leveling super easy. I have probably helped several other camper owners decide to buy a pair for themselves. Everyone who has asked about them was already familiar with them, but were wondering how they actually work. I recommended them highly.

Mike C - 09/20/2018

43801

- WTD-823
by:

product was delivered on time and works as described.Will use them to tie gas cans in pick up bed as we live on a mountain and nedd to keep gas on hand for equipment and generator 696469



- WTD-823
by:

Products are top notch with great prices and speedy delivery. What's not to love? 656059



- WTD-823
by:

Don't buy theses for a new ford truck. I would like like them on any truck the buckle is sharp it's Very thin cheesey 628144



- WTD-823
by:

Really nice product, super easy installation. What I like most is the ability to move them to any location along the truck bed, making them more versatile than the stake pocket type tie downs. I do also have stake pocket style in my truck. 597983



- WTD-823
by:

Just what I was looking for. Clamps on to my Silverado TIGHT. Didn't want to drill holes in bed of truck. Price was competitive and delivery was right on time. Will buy from etrailer again . Should have bought 4 instead of two. Jan 2019. 594703



- WTD-823
by:

Hold up well. Do the job- move easily and hold tight. 542544



- WTD-823
by:

The Bully clamp truck bed tie downs I ordered were very easy to install. I even have the utility track system and a roll up tonneau cover on my 2017 Nissan Frontier, and all six clamps still installed in under an hour with those other two accessories in close proximity. Once I’ve used the clamps I’ll write a second review. As for now, very pleased. 481975


Comments

Fantastic tie down rings. Has both up and down positions, designed with wings and holes to strap in a multitude of ways.

Peter - 03/07/2019

50234

- WTD-823
by:

I wanted a third pair of these wonderful tag points 480512



- WTD-823
by:

Great pruduct, especially handy with tonneau cover! 459844



- WTD-823
by:

Great product - met all expectations. Even better customer service with notification, tracking and timely delivery. 458942



- WTD-823
by:

My F150 lacks a means to secure anything in the bed except the ones that Ford provides which are all located in the bottom corners. That doesn't help if you need to secure something tall. The Bully Clamps solved the problem. They're a breeze to install, can be placed where you need them, and allows you to secure a load wherever you need to in the bed. 457144



- WTD-823
by:

They work great and are made of sturdy material. 443310



- WTD-823
by:

Good product at a reasonable price. 405030



- WTD-823
by:

I AM TRYING TO FIND THE WEB SITE TO ORDER ANOTHER ONE, IT IS GREAT 487406



- WTD-823
by:

This product was easy to install and also easy to move wherever you need it. It works great for securing lightweight cargo. 367600



- WTD-823
by:

Really a cheap and easy way to add tie down locations on the truck rails. It worked well with my bedliner too. I am hauling light weight motorcycles. 349874



- WTD-823
by:

Works great. Easy on, easy off. 338987



- WTD-823
by:

So great I am ordering another pair. 337256



- WTD-823
by:

Have these on my work truck and very well pleased with. Wanted to install on my wife' truck, had a hard time finding them. Good Product. 330725



- WTD-823
by:

works good !!!!!!!!!! 327452



- WTD-823
by:

Easy to install and work as advertised. 320821


Comments

The tie downs are still working great. They are convenient and are easy to relocate as needed.

Mike S - 12/09/2017

31609

- WTD-823
by:

great product for the price. makes securing a load in a changing size pickup bed easier than drilling extra holes. 313073



- WTD-823
by:

Great product. Easy to install. 297373



- WTD-823
by:

This is an excellent way to secure items in your bed. They are easy to install and move. I have two pairs in my F150. Awesome purchase, excellent customer service. 290154



- WTD-823
by:

very good 281906



- WTD-823
by:

Thought they might be a little beefier but they are adaptable to various positions which is very helpful. Quick shipping from etrailer with a very competitive price. Will definitely be a returning customer. 281379


Comments

Holding up well. Have been very handy when hauling items and towing. Pleased with purchase!

John P - 08/08/2017

26966

- WTD-823
by:

Product was as described service was great as always 257907



- WTD-823
by:

Easy to install (2015 Chevy Silverado). Fair price. Does the job. 204082



- WTD-823
by:

Only rail clamp that works without worry. Great product!!! 191668



- WTD-823
by:

Just as described, took about 10 minutes to install 4...looking good on the old 98 F150. 191200



- WTD-823
by:

Very nice and very easy to install. Makes it easy to tiy down anything. 190634



- WTD-823
by:

These are pretty much the greatest thing since cracked nuts !! easy on and off, solid and heavy duty !! 185076



- WTD-823
by:

Perfect solution for tie downs in my pickup bed since the tool box hides 2 OEM tie downs and my softopper cover hides the factory rail holes for top mounted tie downs. They can be placed anywhere along the rail and are movable to optimize positioning for any load. 168337


Comments

works great

gkharris - 01/10/2016

16393

- WTD-823
by:

I ordered two pairs of these clamps and am delighted. Had them installed in five minutes and they do everything as advertised. Being of stainless steel, including the hidden mounting bolt, these will always be removable or relocatable along the truck bed. They are well-made as well and should hold up exceptionally nicely over time and under usage. 167010



- WTD-823
by:

These are truly great products, very happy with them and would recommend to anyone. 157839



- WTD-823
by:

These are excellent and exactly what I needed. Also exceptional service and constant communication from etrailer. Thanks! 157630



- WTD-823
by:

i have had 4 of these on my truck for about 10 years; needed 2 more for the middle. they are very useful and always handy for quickly securing your load and out of your way when not in use. 143000



- WTD-823
by:

I ordered a set a year or so ago. We've taken two kayaks, two bikes and a lot of other stuff to the Keys from Virginia for a month the last two years. Decided I needed two more sets. They work great. You can move them up and down the length of the truck bed. Easy to order. Came within two or three days. Way better than the compression eyes you stick in the holes. These people are great to deal with. 119957



- WTD-823
by:

bought these to use with a Retrax tonneau. wasn't sure it would work and the etrailer.com folks were very helpful in trying to assess that. I bought a pair just to try it out. they work well secured to the rails of the tonneau, but you can't close the tonneau over them. however, if you just need them occasionally when you're hauling a load that won't fit under the tonneau, these can do the job. 119697



- WTD-823
by:

Great! Fast shipping! Thanks!!! 107311


51
72
Show More Reviews

Ask the Experts about this Pilot Automotive Truck Bed Accessories

Do you have a question about this Truck Bed Accessory?


  • Truck Bed Tie-Downs for 2016 Ford F-150
  • I may have a solution for you, however the ProGrip Retractable Tie-Down Anchors # 317-850760 that you referenced are not compatible with the stake pockets on your 2016 Ford F-150. At this time we do not have any stake pocket tie-down anchors available that will work on your truck. An alternative that should work nicely is the Pilot Bully Clamp Truck Bed Movable Tie Down # WTD-823. These are universal tie-downs that will mount anywhere under a truck's bed side rail without the need for...
    view full answer...

  • Will Pilot Bully Clamp WTD-823 Fit a 2019 Ford Ranger
  • Yes, the Pilot Bully Clamp Truck Bed Movable Tie Downs # WTD-823 is considered a universal fit because it simply clamps to your trucks side rails. The teeth on the small metal clamp grab onto the bare metal lip on the inside of your rail which you will then tighten by hand using the bolt on the bottom. As long as you have access to the inside of your rails, the Pilot Bully Clamp will work perfectly on your 2019 Ford Ranger.
    view full answer...

  • Fit and Compatibility of Truck Bed Tie Downs with a Hard Plastic Bed Liner that Covers Metal BedRail
  • It sounds like you are wanting to know if the Pilot Bully Clamp Truck Bed Movable Tie Downs # WTD-823 can be installed over the hard plastic bed liner that covers the rail. I spoke to my contact at Pilot and he said that the inner rail would need to be connected to the bare metal rail while the rail that you can see in the bed of your truck would be fine to have the plastic bed liner installed over. I have linked an image for you to better see which part will mount on the inner underside...
    view full answer...

  • Will CargoSmart Truck Bed Liner Anchor Points Work with 3/4" Hole on Truck Bed
  • I spoke with my contact at CargoSmart and he said that the 3/4 inch holes on your truck bed walls are a bit too small to use with the Truck Bed Liner Anchor Points # 348821 you referenced. The wings/toggles on the anchor points require a hole that's at least just under an inch in diameter. Another good alternative that won't require any modification to your truck bed is the Pilot Bully Clamp Tie Downs # WTD-823. These will simply clamp to the underside of your truck's bed rails to provide...
    view full answer...

  • Will the Bully Clamp Truck Bed Moveable Tie Down # WTD-823 fit on a 2014 Ford Raptor F-150
  • Our experiences have been that the # WTD-823 will work well with a rail cap liner cover like your 2014 Ford Raptor F-150. Check out the video I attached that shows Bully Clamp Truck Bed Moveable Tie Down # WTD-823 being installed onto a truck bed rail that has a rail cap liner cover
    view full answer...

  • Additional Clamp-On Truck Bed Side Rail Anchors for # QP001006 Truck Bed Tie Down Kit
  • Although QuiteRite doesn't offer the clamps separately, we do offer some products that would do the job for you. Bully/Pilot offers some clamps that are actually more durable than those included in the # QP001006 Tie Down Kit. The # WTD-811 and # WTD-823 clamps from Pilot are actually made of metal, so they'll last much longer. If your truck doesn't have an over the side rail bed liner, the # WTD-811 from Pilot would work. Given the way the hooks are designed, I believe the # WTD-823...
    view full answer...

  • Recommended Anchors for a Ford F-150 XLT to Transport a Refrigerator Long Distance
  • The Erickson Anchors # EM01003 and Pilot Bully clamps # WTD-823 are both solid choices for your setup. I recommend going with the Pilot Bully clamps # WTD-823 because they are heavy duty and don't have a load capacity rating because the tie down mounts are installed to the truck beds side rails. It will hold a load that will cause the truck's side rails to cave in before the tie down will break. To remove the cover off the stake bed pockets, You could use a flat head screwdriver to pry...
    view full answer...

  • Weight Capacity for the Bully Clamp Truck Bed Movable Tie Down # WTD-823
  • According to Pilot, the tie-downs, # WTD-823, have a capacity that is equal to whatever the truck bedside rails can handle. The tie-downs fit underneath the bed rails like in the video I have linked for you. I would say that most likely these would work just fine for you.
    view full answer...

  • Can FloTool Wheel Chocks # FT11930MI be Used to Secure a Riding Mower or Push Mower in a Truck Bed
  • The only chocks that would do a decent job of keeping a mower in place in a truck bed would be ones that are permanently mounted to the truck; preferably to the frame and not just through the bed. FloTool Wheel Chocks # FT11930MI could be permanently mounted by running some screws down through the holes that are in the chocks but then you have to rely on the strength of the screws to hold the weight of the mower. For your application straps should be the primary means of restraint while...
    view full answer...

  • Availability of Anchors to Fit 2012 Nissan Frontier With Covered Bed Rails
  • The Erickson Heavy-Duty Retractable Anchor, part # EM01003, should be able to install in the stake pockets of your 2012 Nissan Frontier. Your Nissan Frontier might have the factory bed rail caps installed that would cover up the stake pockets on your truck bed. You will need to cut out the section of the bed rail that is located over the stake pocket to allow the Anchors to be installed on your truck bed. The anchors will drop into the stake pocket and the lower bracket will be tightened...
    view full answer...

  • Will the Bully Clamp Truck Bed Moveable Tie Down # WTD-823 Work with a Rail Cap Liner Cover
  • Our experiences have been that they will work well with a rail cap liner cover. Check out the video I attached that shows Bully Clamp Truck Bed Moveable Tie Down # WTD-823 being installed onto a truck bed rail that has a rail cap liner cover
    view full answer...

  • Are Truck Bed Tie Downs Compatible With A Tonneau Cover On A 2005 Dodge Dakota
  • Yes, the Bully Clamp Truck Bed Movable Tie Down part # WTD-823 will work on your 2005 Dodge Dakota with the Tonno Pro Tonno Fold Soft Tonneau Cover part # TP42-203 I have attached a review video of the bed cover for you.
    view full answer...

  • Fit and Compatibility of Movable Anchors on a 2017 Ford F-350 Super Duty with 8 Foot Bed
  • The Pilot Bully Clamp Truck Bed Movable Tie Downs # WTD-823 can be installed on most trucks with its universal design. I spoke to my contact at Pilot and he said that the anchors # WTD-823 would fit any truck as long as the inner rail the mounting bracket connected to is a bare metal rail while the other side of the rail that you can see in the bed of your truck would be fine to have a bed liner installed over. I have linked an image for you to better see which part will mount on the...
    view full answer...

  • Will the Bully Clamp Tie-Downs # WTD-823 Fit on a 2006 Dodge Dakota
  • Yes, the Bully Clamp Tie-Down, # WTD-823, will fit on your 2006 Dodge Dakota. These clamps were designed to fit most trucks that have a lip at the top of the truck bed side wall, which your Dakota should have. I have attached a demonstration video that shows how to install these clamps for you to check out. If you would like a set of straps to go with the clamps, I recommend the Erickson Ratcheting Tie-Down Straps, # EM31352.
    view full answer...

  • Truck Bed Rail Tie Down Anchor Point Recommendation for Truck with Access Tonneau Installed
  • I have a solution to use as a tie-down anchor in your truck that has an Access Toolbox Edition Tonneau Cover installed, but since the # WTD-823 and your tonneau mount to the same part of the truck bed rail the two cannot be installed at the same time. Instead you would want to use the Putco part # P99901 which attaches to the stake pockets and would fit and work well.
    view full answer...

  • Dimensions of the Bully Clamp Truck Bed Movable Tie Down WTD-823
  • I attached a picture of the part # WTD-823 that shows it's dimensions. I also attached an install video.
    view full answer...

  • Are the Front and Rear Pucks on a 2018 Ram 3500 Different
  • Yes, the Ram Factory Puck System has remained unchanged for the most part since its release therefore, the front pucks are different than those on the rear of your 2018 Ram 3500. The safety chain loops included with the Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch part # C60618, B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch part # BWGNXA2062, and Reese Elite Series Pop-In Ball Kit for Ram Under-Bed Gooseneck Hitch part # RP30140 will only...
    view full answer...

  • Will the Bully Clamp Truck Bed Moveable Tie Down # WTD-823 Fit 2008 Chevy Colorado w Bed Rail Liner
  • Our experiences have been that they will work well with a rail cap liner cover. Check out the video I attached that shows Bully Clamp Truck Bed Moveable Tie Down # WTD-823 being installed onto a truck bed rail that has a rail cap liner cover
    view full answer...

  • Will Extang Cleat Fit a 2012 Ford F-150 with TruXedo TruXport Tonneau Cover
  • The Extang cleat # EX1932 is designed to work with Tonneau covers that do not have mounting rails that mount to the inside of the truck bed rails. The TruXedo TruXport Tonneau covers have rails that block where the cleat needs to mount so the Tonneau cover would not fit properly with the cleat installed. I have included a picture of the type of Tonneau cover mount that is compatible. A better option would be tie down anchors # WTD-823 that get wedged up under the tops of the beds sides...
    view full answer...

  • Fit of Bully Clamp Truck Bed Movable Tie Down WTD-823 on 2003 Chevy Avalanche
  • If you have access to the lip on the bottom of the tops of the truck bed sides, then the Pilot Automotive # WTD-823 would fit, and would work just fine for you. If you look at the photo and diagram I've provided, you can see how the clamp attaches to the bed side. I've also linked you to a product demonstration video.
    view full answer...

  • Truck Bed Tie Down Kit Recommendation for a 2013 Nissan Frontier
  • As long as you have access to the underside of your bed rails the Bully Clamp Tie Down kit part # WTD-823 would work great for your 2013 Nissan Frontier. I attached a review video for you to check out as well. Another option would be a stake pocket mount style like the part # 92509. I attached a review video for this product as well.
    view full answer...

  • Weight Capacity of the Bully Truck Bed Tie Downs # WTD-823
  • The Bully Tie Down Anchors, part # WTD-823, have no load capacity rating. When the tie down mounts are installed to the truck bed side rail correctly, they will hold a load that will cause the trucks side rails to cave in or bend up before the anchor will break. These anchors have been tested to ensure they are stronger than the bed rails. Straps that are to be used with the Bully tie downs need to have a high enough breaking strength capacity for the load you will be tying down, since...
    view full answer...

  • Adding Tie-Down Points to Secure a Boat on a Ford Ranger with a Tonneau Cover
  • You may be able to use the Bully Clamp Tie Downs # WTD-823 but I'm not sure they'll work with your tonneau cover. Another option, that isn't really ideal, is to drill into the truck and install some D-rings like # SR10-C.
    view full answer...

  • Can Pilot Automotive Tie Down Anchors, part # WTD-823, Hold Motorcycles in a Truck Bed
  • Our contacts at Pilot tell us that the Tie Down Anchors, part # WTD-823, does not have a specific capacity but will be able to hold a load that is equal to the force required to care in the side rails of the truck. Based on this information they will be able to hold a motorcycle with no problem. A strap can be tied to or hooked onto these anchor points so they should work well. You may also be interested in the Tie-Down motorcycle assist straps # 06303 so you do not have to use a hook...
    view full answer...

  • Truck Bed Tie Down Recommendation for a 2009 Ford F-150 With Roll n Lock Tonneau Cover
  • We have not tested the Bully Clamp Tie Down, # WTD-823, with a Roll n Lock tonneau cover, but from my research, I do not think they would be compatible with each other. Roll n Lock offers the M Series tonneau cover for your 2009 Ford F-150, which attached to the inside of the bed rail. This is the same location that the Bully Clamp Tie Down uses. The tie downs that may work with your Roll n Lock cover are stake pocket tie downs like the Putco Push-Up Tie Downs, # P99901. These tie downs...
    view full answer...

  • Will the Bully Clamp Truck Bed Tie Down # WTD-823 Fit on a 2006 Nissan Frontier King Cab XE
  • The Bully Clamp Truck Bed Tie Down, # WTD-823, is a universal truck bed clamp that was designed to fit as many vehicle as possible. Vehicles with unusual setups are sometimes not compatible with universal fit items, but I have taken a few measurements of this tie down for you to compare with your truck bed to determine if it will work. Unfortunately we have not had the chance to test these tie downs on a 2006 Nissan Frontier. I have attached a photo showing the dimensions of this tie down.
    view full answer...

  • Does the Pilot Automotive Tie Down Anchors # WTD-823 Have a Load Capacity
  • I spoke with my contact at Pilot on the Pilot Automotive Tie Down Anchors, part # WTD-823, and if it has a load capacity rating. He explained that if the tie down mounts are installed to the truck beds side rail correctly, it will hold a load that will cause the trucks side rails to cave in before the tie down will break. He said that was how they tested the tie downs on a truck. He also stated that the straps that are to be used with the Pilot tie downs would need to have a high enough...
    view full answer...

  • Dimensions of the Holes in the Tie Down Cleats on the Bully Truck Bed Tie Down Clamps # WTD-823
  • I went out to the warehouse to measure the Bully Clamp Truck Bed Moveable Tie Down (Pair), # WTD-823. The 2 smaller holes in the movable cleats are 7/16 inches diameter and the larger holes are 1 inch diameter. I have included a links to a couple of videos below for reference.
    view full answer...

  • Cargo Management Tie Down Options for Truck Bed
  • I do have options for cargo security but I am not familiar with "Liner Locks" as we do not nor have we ever carried this product. I did a bit of research on them and if I can be honest they do not look very secure. Therefore, if you will be trying to secure anything in your truck bed that has a bit of weight you will want to look into more conventional tie downs. We do not have any tie downs that clamp onto the bed floor but again this does not seem like the most secure attachment point...
    view full answer...

  • In-bed Camper Tie Down Recommendations for a 2009 Dodge Ram 1500
  • According to Pilot, the tie-downs, # WTD-823, have a capacity that is equal to whatever the truck bedside rails can handle. The tie-downs fit underneath the bed rails like in the video I have linked for you. Provided there is nothing in the way they could fit your 2009 Dodge Ram 1500 but will not work if you have the OEM bed rail cap installed. A co-worker had a set and they did not hold when a load was applied to them on his 2009 Ram. Since they install on the inside of the bed you...
    view full answer...


Do you have a question about this Truck Bed Accessory?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality truck bed accessories for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate truck bed accessory information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jackie C
Expert Research:
Michael L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Laura H
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.