1. Truck Bed Accessories
  2. GCH Automotive
  3. Truck Bed Cargo Camera
Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision

Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision

Item # 3460006
lowest price pledge
Our Price: $509.57
Truck Bed Accessories

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
GCH Automotive Truck Bed Cargo Camera - 3460006
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Custom bezel with camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using your vehicle's factory monitor. Switch kit lets you toggle between views from your backup camera and third brake light camera. Lowest Prices for the best truck bed accessories from GCH Automotive. Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision part number 3460006 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (6)
  • Q & A (16)
  • Photos
  • Why etrailer?

GCH Automotive Truck Bed Accessories - 3460006

  • Truck Bed Cargo Camera
  • GCH Automotive

Custom bezel with camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using your vehicle's factory monitor. Switch kit lets you toggle between views from your backup camera and third brake light camera.


Features:

  • Custom bezel with camera mounts behind your third brake light so you can see into your truck bed
    • Works with your 8" factory monitor
    • Assists in connecting your fifth wheel or gooseneck trailer
    • Only functions while in reverse
  • Camera manually adjusts 360-degrees for a perfect angle into your truck bed
    • Gives you a 150-degree viewing angle
  • Rear assist marker lines generated by camera show distance from other objects
  • 0 Lux night vision produces a quality picture in complete darkness without IR transmitters
  • Switch kit allows you to toggle between truck bed camera and your factory backup camera
  • Waterproof, aluminum camera resists dust and corrosion
    • IP69-rated to protect against dust and close-range, high-pressure spray downs
  • Installation - uses your existing hardware
    • Drilling is required if you choose to mount the flip switch


Specs:

  • Camera bezel dimensions: 11-3/8" wide x 4-1/8" tall x 1-11/16" deep
  • Mounting hole spacing: 9-13/16" center to center
  • Camera diameter: 1-1/2"
  • Resolution: 620 Lines
  • Voltage: 12V - 24V DC
  • Wiring harness: 24' long
  • 3-Year warranty


Rear Assist Lines


GCH

The rear assist lines generated by the system's camera make connecting your fifth wheel camper or gooseneck trailer a one-person job. The lines appear on your 8" factory monitor and show the distance from other objects, allowing you to accurately line up your connection point when hooking up your camper or trailer.


0 Lux Night Vision

0 Lux night vision produces a quality picture and gives you the flexibility you need when hooking up your camper or trailer. You can line up your connection point in low-light conditions at dusk, or in complete darkness at night without the aid of IR transmitters.


Switch Kit


Toggle Switch

The switch kit adds a new dimension to your current setup, allowing you to toggle between views from your truck bed camera and factory backup camera with the flip of a switch. The integrated flip switch can be mounted inside of your truck to give you a clean OEM look and easy access.


Simple Installation


2008-2016 Ford Bezel Side by Side

Simply unscrew and unplug your factory third brake light. Once removed, set your new custom bezel with camera in place. Feed the 6' camera wire through the opening into your truck and re-install your factory third brake light in front of the custom bezel.


2008-2016 ford bezel connection

Connect your 6' camera wire to the 18' wiring harness. This combined 24' wire will extend through your head liner or door sill panel along the edge of the floor, up to the front of your truck, and connect with the included ground and power wiring harness. The power wire will run to your truck's battery.


T-harness connection

The switch kit installs by connecting one end of the included T-harness into the factory plug behind your radio, and the other end into the back of your radio. The integrated power wire for the flip switch will run to 12V accessory power.



FRDBRK360SW-K1 Truck Bed Camera for Factory 8" Monitor - Night Vision - Switch Kit



This Product Fits The Following Vehicles





Customer Reviews

Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision - 3460006

Average Customer Rating:  4.8 out of 5 stars   (6 Customer Reviews)

Custom bezel with camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using your vehicle's factory monitor. Switch kit lets you toggle between views from your backup camera and third brake light camera.

- 3460006
by:

Product is great works well. Installation instructions were vague and required some trial and area. Once I figured out what needed power the installation went well. 706258



- 3460006
by:
2016 Ford F-350 Super Duty

Very easy to install had to return the first one did not work. This one works great you should check it all out before running all the wires. I did that this time and it all worked then I installed it all works great. The return thing with etrailer is very good they are all great people to work with. They will get you the answers you need 594079


Comments
Works great no problems
Steve W - 12/31/2019

64010

- 3460006
by:

Easy install and works well. 663866



- 3460006
by:

Easy install. Working exactly as advertised on my 2015 f250 876502



- 3460006
by:
National

Ford add on rear view truck bed camera makes hitching my fifth wheel camper very easy giving me full view of truck bed and hitch line up from within the cab. Installation was a little more difficult then I first thought but was able to figure a way to install wiring in the sealing area. Could not get rear view camera to work at first, contacted E trailer and was cent an e mail with a picture of the wiring diagram fully connected and found a step was left out and made changes and camera worked grate. E trailer has grate support staff and user friendly. Went on a 6000 mile trip in the fall and visited the Mid West and visited 13 National Parks. 772963



- 3460006
by:
2015 Ford F-350 Super Duty

Received the camera and installed it. I watched the installation video on the etrailer site and i was very helpful. The camera works great. 695329


6
6

Ask the Experts about this GCH Automotive Truck Bed Accessories

  • Can Upfitter Switch be Used for 3rd Brake Light Camera on 2016 Ford F-350
    Yes, you can install the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 on your 2016 Ford F-350 using one of the upfitter switches instead of the red toggle switch that comes with the unit. I am attaching a photo of the installation instructions that you can check out as well as a sample installation video you can reference. In this video we did use the red toggle switch so your install will look a little different.
    view full answer...
  • Where do Red Wires on Custom Third Brake Light Camera for Ford Super Duty Connect to
    Both of the red wires on the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 will connect to power on your 2015 Ford F-350, while the black wire needs to be connected to ground. When we installed this wiring kit on a 2015 F-350 we used a fuse tap # F2526 to fuse location 44 (auxiliary switches) on the passenger fuse panel. To get this whole system to work properly you will want to have both red wires connected to continuous power so that when you flip the switch it will...
    view full answer...
  • Camera System for Hitching Goosneck or 5th Wheel Hitch on 2013 Ford Super Duty w/ Headache Rack
    If your headache rack doesn't block the 3rd brake lamp, we have an option that would work great for you. Take a look at the # 3460008 from GCH Automotive. This system is intended for use on vehicles that don't have the factory reverse camera, and the monitor is included. If your truck has a factory rear view camera already, use the # 3460025 which would utilize your factory 4.2 inch factory monitor. Even if the headache rack blocks the 3rd brake lamp itself, the camera extends about 1-1/2...
    view full answer...
  • How Much Power Does the Camera for the Truck Bed Cargo Camera for Factory Monitor 3460006 Draw
    The Truck Bed Cargo Camera for 8" Factory Monitor part # 3460006 which is a fit for your 2016 Ford F-350 will only draw around 0.3 amps. I spoke with GCH and they recommend that you use a 3 amp fuse for the switch. If you cannot replace one of the fuses on your existing power source then it would be best to run this directly to the battery. It will not draw power when the vehicle is off.
    view full answer...
  • Do Both Red Wires on the Truck Bed Cargo Camera for a 2014 Ford F-350 Need Power
    I spoke with GCH Automotive about the Truck Bed Cargo Camera for 8" Factory Monitor part # 3460006 which is a fit for your 2014 Ford F-350 with Sync 2 and they informed me that you can use either the red wire on the switch for power or the red wire on the adapter for power but both do not need to be ran. The reason you have a choice is because the red wire on the switch is mostly used when the camera is tired into an ignition circuit so it will act as an observation system and the red wire...
    view full answer...
  • Installing GCH Truck Bed Cargo Camera # 3460006 on 2013 Ford F-350
    There aren't any additional instruction manuals from GCH regarding the interconnections of the Truck Bed Cargo Camera # 3460006 for your 2013 Ford F-350, however I have attached an image below that you might find helpful. This shows what the entire kit will look like when everything is connected with each other. As far as reaching the rear of the 8 inch monitor in your truck, I spoke with my contact at GCH and he said there should be a panel right above the monitor that stretches across...
    view full answer...
  • Compatibility of 3rd Brake Light Cargo Camera with Toolbox In Ford Super Duty
    The Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit part # 3460006 does feature a 150 degree angle image and 360 degree adjustable camera. If your tool box is up against the cab you can adjust the camera to see over it, but you probably won't even have to considering it's low profile. I have attached a screen shot of the video (and video) that shows the camera angle with a Gooseneck ball for your reference. Please keep in mind this particular camera is made for Fords with...
    view full answer...
  • Installation Instructions for the Truck Bed Cargo Camera for 8" Factory Monitor # 3460006
    I was able to take a picture of the instructions for the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit # 3460006 that you referenced. The camera unit actually has a "T" harness that will send the video feed directly to the OEM monitor on your Ford Super Duty. I am not sure how the fitter switches are connected in your pickup but if one of them is connected to power you can simply connect the wire for the rocker switch to your OEM switch and just leave the rocker switch in...
    view full answer...
  • Routing the Wiring for the Truck Bed Cargo Camera on a 2014 Ford F350 Super Duty
    When routing the wiring for the Truck Bed Cargo Camera for 8" Factory Monitor # 3460006 you should be able to run it inside the trim that runs from the roof to your dash. Whenever we route wiring on any vehicle this is typically a safe place to run it. Although we haven't performed this specific installation on a 2014 Ford F-350 Super Duty you can see in the attached review video where we did this on a similar Super Duty.
    view full answer...
  • How To Measure Your Screen To Find the Correct Third Brake Light Camera For a Ford F-250/F-350
    The correct way to measure the monitor is diagonally therefore if you got 8" from corner to corner across then the Custom Third Brake Light Camera part # 3460006 is correct for a 2016 Ford F-250 and also fits a 2008-2016 Ford F250/F350. In regards to installation, it is not difficult per say but it will take some time. The amount of time it will take is largely going to vary by experience level but I am sure if you take your time and remain patient it would not be too much of a hassle. I...
    view full answer...
  • Can I Use Existing Switch on Ford F-250 to Install Power On/Off of Custom 3rd Brake Light Camera
    Yes. There is no reason that you can't just use the upfitter switch in your Ford F-250 to connect the power of the Custom 3rd Brake Light Camera # 3460006 instead of installing a new switch. I've linked an installation video we did that you can use as a reference, as well.
    view full answer...
  • Does Custom Third Brake Light Monitor for Ford Trucks Come with Everything to Install
    This Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 comes with everything needed to complete the install in your truck. It is a custom fit kit for your 2016 Ford F-350 and does not require additional install hardware beyond what comes with it.
    view full answer...
  • Black Screen With Custom Third Brake Light Camera on 2013 Ford F-250
    If you are getting voltage, there are only a couple things I can think of that would be causing a black screen with the Custom Third Brake Light Camera for 8" Factory Monitor # 3460006 on your 2013 Ford F-250. One - and I know this is very basic but I do have to mention it - is that it will only work if you are in reverse, so make sure you're in reverse when seeing if it will work. Otherwise, the other thing that may be occurring is a connection not being fully seated or somehow crimped.
    view full answer...
  • Truck Bed Cargo Camera for 2011 Ford F-250
    We currently have two factory monitor truck bed cargo cameras available for your 2011 Ford F-250; the GCH # 3460006 that you already mentioned that's designed for the factory 8 inch screen and the GCH # 3460025 that works with the factory 4.2 inch screen. I recommend taking a quick diagonal measurement on the screen itself inside your truck (from a bottom corner to a top corner on the opposite side). This will give you the actual screen dimension that hopefully corresponds to one of...
    view full answer...
  • Third Brake Light Camera Kit for 2008 Ford F-250 with Kenwood Head Unit
    Since your truck has an aftermarket Kenwood stereo the camera kit you'd need is the Custom Third Brake Light Camera for Aftermarket Monitor # 3460007 that you referenced. The # 3460006 is for factory monitors on the newer Ford trucks. The # 3460007 will easily connect to the camera input wiring of your Kenwood.
    view full answer...
  • Troubleshooting Truck Bed Cargo Camera on 2016 Ford F-350 with Factory Screen
    For your 2016 Ford F-350, the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit # 3460006 is the correct fit. I reached out to their tech and he said since you are getting the switch over to a black screen it simply sounds like you aren't getting 12v power to the camera for it to sent the signal back. You will want to use a circuit tester like # PTW2993 to test the black power wire going to that camera and then trace that wire to determine why power is not getting to the camera....
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality truck bed accessories for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate truck bed accessory information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Andrew K
Video Edited:
Jacob T
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Leah S
Updated by:
Adam Y
Edited by:
Amanda M
Test Fit:
David F
Written by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.