Erickson Stake Pocket Tie-Down Anchors - Chrome-Plated Steel - 2,000 lbs - Qty 2

Erickson Stake Pocket Tie-Down Anchors - Chrome-Plated Steel - 2,000 lbs - Qty 2

Item # EM09085

lowest price pledge

Retail:$26.98

Our Price: $18.38

You Save: 32%
Truck Bed Accessories

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.98 lbs

Quantity: 
In Stock, Ships Today
Truck Bed Accessories EM09085 - No-Drill Application - Erickson
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos


  • Tie Down Anchors
  • Stake Pocket Application
  • Erickson
  • No-Drill Application
  • 2000 lbs
Easily add a tie-down point to your truck with these Erickson stake pocket anchors. They install in your truck bed's stake pockets, safely handle a WLL of 2,000 pounds each and feature an attractive, chrome-plated finish. Lowest Prices for the best truck bed accessories from Erickson. Erickson Stake Pocket Tie-Down Anchors - Chrome-Plated Steel - 2,000 lbs - Qty 2 part number EM09085 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (36)
  • Q & A (9)
  • Videos (1)
  • Photos
  • Why etrailer?

Erickson Truck Bed Accessories - EM09085

Easily add a tie-down point to your truck with these Erickson stake pocket anchors. They install in your truck bed's stake pockets, safely handle a WLL of 2,000 pounds each and feature an attractive, chrome-plated finish.


Features:

  • Sturdy anchors serve as tie-down points in your truck bed
    • Install in truck stake pockets - no tools required
  • 3 Different mounting holes and angles
  • Chrome-plated steel construction resists corrosion and complements your truck's trim


Specs:

  • Application: most truck-bed stake pockets
  • Weight capacity: 2,000 lbs
  • Dimensions of top plates: 3-3/8" long x 2-1/4" wide
  • Dimensions of arch plates: 2-1/2" long x 1-1/2" wide
  • Diameter of bolts: 3/8"
  • Quantity: 2 anchors
  • 90-Day limited warranty


09085 Tie Down Anchors for Truck Bed Stake Pockets by Erickson - Chrome-Plated Steel - 2,000 lbs - QTY 2







Video of Erickson Stake Pocket Tie-Down Anchors - Chrome-Plated Steel - 2,000 lbs - Qty 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Erickson Truck Bed Accessories - Tie Down Anchors - EM09085 Review

Today we'll be reviewing part number EM09085. These are the Erickson Stake Pocket Tie-Down Anchors. There are two included. The sturdy anchors are going to service tie-down points in your truck bed. They just simply install into the truck's stake pockets; not tools are required. The anchor itself provides three different mounting holes and angles to chose from.

They're made from a chrome-plated steel construction so they are going to stand up well against rust and corrosion. It's also going to compliment your truck's trim. This is a universal application so it's designed to fit most truck bed stake pockets. Each one is going to provide a weight capacity of up to 2,000 pounds. To go over a few measurements real quick, the top plate, which is this portion here, is going to measure 3 3/8" x 2 1/4". The arch plate is going to measure 2 1/2" x 1 1/2".

The best way to determine whether or not this is going to fit your stake pocket mount is the arch portion here goes into the stake pocket. As long as your stake pocket has a length less than 2 1/2", then these are going to work great because it's going to give it plenty of room to grip and to get a secure hold as you tighten down the anchor on there. The way this works is you would place this inside your stake pocket mount on your pickup bed. Then you can put the rubber plate on top to help protect the surrounding finish of the stake pocket mount. Then you can take your top plate, fit it on there, and then you would just take your anchor and simply thread it on. These bolts have a thickness of 3/8".

Once you have that fully tightened down - the more you tighten it, the more pressure it's going to pull up on that arch plate and provide a more secure hold inside the stake pocket mount. Once you have that on there, you're ready to make your connection and you're ready to get on your way. That's going to complete today's review of part number EM09085. These are the Erickson Stake Pocket Tie-Down Anchors. .


Customer Reviews

Erickson Stake Pocket Tie-Down Anchors - Chrome-Plated Steel - 2,000 lbs - Qty 2 - EM09085

Average Customer Rating:  4.5 out of 5 stars   (36 Customer Reviews)

Easily add a tie-down point to your truck with these Erickson stake pocket anchors. They install in your truck bed's stake pockets, safely handle a WLL of 2,000 pounds each and feature an attractive, chrome-plated finish.

- EM09085
by:

These anchors have performed as advertised. They are strong, and have very minor corrosion after 1 year, in AZ. 634102



- EM09085
by:

Work good on my truck 625480



- EM09085
by:

I don't usually write reviews, but this product is so perfect I had to. It attaches quickly and securely, and fits perfectly. Now I can fasten cargo down efficiently and I can remove the devices when I want to reinstall my shell. Great service too. 580813



- EM09085
by:

I like the way the product works but both plates bubbled up and rusted 539670



- EM09085
by:

These worked great for 1996 F150. Had to modify the the bracket that goes into the pocket for them to fit into the middle and front stake pocket. Nice look to the truck and seems very strong. I do wish they where made out of stainless steal. 390309



- EM09085
by:

Tie down made well, heavy duty. Installed on trunk bed easily. Nice Chrome, look great. I believe these tie downs will hold up well. 382670



- EM09085
by:

Got items in 3 days... great shape... good service.. 358482



- EM09085
by:

Easy to install,and a great price,however they bent easily when you tied a rope to them. Still functional but surprised they were not stronger 351117



- EM09085
by:

Great product. Very quick delivery. Easy installation of very sturdy tie down anchors. I definitely recommend this product. 337417



- EM09085
by:

Hooks created great tie down points. They are showing light surface rust, but from previous reviews I expected that. Very good overall product 312230



- EM09085
by:

The Erickinson Stake Pocket Tie Downs do not fit a GMC well - I had to work hard to get the under plate in and then it is not centered so the rubber gasket does not cover the complete opening of the stake pocket. I still haven't been able to get the anchors in the front stake pockets and are trying to figure out how I am going to get it done. They are chrome plated and one of the 2 I have put in peeled of some of the "chrome" off before I was finished attaching. I really like the choices I have for tying down different loads but I don't think they will last long. 306010



- EM09085
by:

I haven't tried to fit them on my truck yet but they are heavy and well made.I'll write back once I put them on. 296017



- EM09085
by:

fit great. just what i needed.good serv ice. 295594



- EM09085
by:

Fits in the pockets on my 88 f250 snug and stand up great to constant use. I would recomend these to anyone. 282343



- EM09085
by:

I found these on line via a search engine and they are just what i was looking for-I ordered them a few days ago and they arrived today, so very fast shipping- 243559



- EM09085
by:

Looks just like the pic and the shipping was super fast as usual from you...many thanks ! 230337



- EM09085
by:

The Erickson Stake Pocket Tie-Down Anchors, are perfect for what I needed, VERY STRONG, extremely easy to install they work great for all my needs. I'm always needing to tie down stuff in the back of my truck, they work great with all types of applications from ropes, bungees to straps very happy with the this product. I would highly recommend these Tie-Down Anchors to my friends and family. Great Job !!! Tony M. 202185



- EM09085
by:

Great product. Quick service. Strongly recommend etrailer! 190387



- EM09085
by:

Very prompt delivery. Make a great addition to the truck. Easy to attach straps to for securing loads. 147477



- EM09085
by:

Parts camed within a few days in great condition. Unscrew from package and make sure "pocket plate" has the bent ends facing up before inserting. Do not completely unscrew the assembly during installation-just run the "pocket plate" down as far as threading allows. Make sure "pocket plate" is 90 degree's from top plate during install. Tip the whole assembly down into the pocket so the bottom plate is below the top lip of the truck bed pocket, once inside hold assembly up while turning to tighten to keep the bottom plate from going out of 90 degree. When tightening keep a eye on the truck bed sheet metal, the bottom plate can and will deform it if you tighten too much (I used a long pry bar for leverage). 147327



- EM09085
by:

Very strong and attractive stake pocket tie down. Eliminate straps and use turnbuckles to hold down your camper, or other cargo. This three way tie gives you many more options of tie holds to hold even more cargo. Best of the best. 143996



- EM09085
by:

I've had a set of six of these on my long bed F-150 for at least 15 yrs. They are very strong and allow many different ways to tie your load down. This is a great design for a stake pocket anchor. I wish this design was available in stainless steel as my truck sits outside and these will rust if not covered or otherwise protected. I recently had to purchase a set of two in order to replace one anchor because I accidentally let the threaded flange fall down inside the bed body and couldn't retrieve it. Luckily, I was able to find these at etrailer. I highly recommend these anchors. 116727


Comments

It has been a year since I installed the two new anchors and both are showing signs of rust. My old ones 16 yrs are very rusted but still very functional. I love this design and would buy a whole new set of six if they were stainless steel hint, hint. Otherwise, these rusted ones work just fine. Not pretty but neither is my truck. You never know, a new set of stainless anchors might just give me the incentive to give my truck a new coat of paint.

Terry O - 02/17/2015

9559

- EM09085
by:

These are a very nice product and good value for the money. I installed these on my 1992 F150 even though they were not shown to fit. The rear ones went on perfectly and took 5 minutes each to install. My stake holes not right for the front anchors and I spent an extra 10 minutes on each trimming the anchor base plate too fit. Anyone with mechanical ability can make these work and now I can keep coolers and things from sliding around in the bed of my truck. 102650


Comments

Not Good! I really like having these on my truck but in no time they rusted completely and look terrible. They did not make six months before rusting and to make it worse, I wax them when I wax the truck. I will end up painting them or throwing them away.

old f - 10/05/2014

7143

- EM09085
by:

Product is built in a strong, useful way. Useful hooks and loops, however did not fit my truck properly. needed to modify part that clamps tie-downs in place in order to get them to fit stake pocket. Manufacturer indicated they fit my model and make. 96978


Comments

It was OK except the rubber or plastic pads that were sent with the tie-down anchors changed the color of the paint on my truck! Directly under the pad the paint became a darker color. Doesnt look good at all. Otherwise the anchors were fine.

Frank R - 08/27/2014

6515

- EM09085
by:

I love the product. It was a big deal to get it installed. NOT the products fault or design. I own a 2008 Chevy Silverado 1500 LT. The stake holes were the problem. I tried to install one and it would lean to one side. I tried a different stake hole, the same problem. I decided to feel around in the hole. I found that the side facing out, the lip was 1/8 inch or less and would not let the brace go under there. I had to get up in the truck bed with a piece of round steel rod and put it in the hole and hit it with a hammer to drive the inside of the stake hole out so the brace would fit in right. Make sure to use a rag around the rod so it does not scratch the top of truck bed. Sorry no pictures available. 96665



- EM09085
by:

Hey these are great. Very fast turn around on the order. Easy to install. Keeps my 4-wheeler in the bed of truck right where I want it. They look good too! Thanks a bunch. A-1 Service. 95820



- EM09085
by:

Easy Install, works great! 94999



- EM09085
by:

Bought for a 2013 Ford F150 Supercab. I drilled and used the existing stake pocket covers rather than the supplied rubber gaskets. They look fine. 85392



- EM09085
by:

Good product for the price. I wanted something a little different than everyone else and something without moving parts. 81665



- EM09085
by:

Appears very strong and very easy to in stall 80336


Comments

Still works well, but they are rusting badly!

Bill - 05/15/2014

4195

- EM09085
by:

the best tie downs ever looks great and holds better then all others vince 65934



- EM09085
by:

I got just what I wanted--I will note that if you have a spray in bedliner it makes mounting these somewhat tight 64607


Comments

All 4 started to rustI have removed them

Robert - 07/31/2014

5998

- EM09085
by:

Installed easy 59235



- EM09085
by:

I haven't had a chance to try them but the instal was easy and they look great. The best thing is that the anchor isn't just a loop you can tie around the corners. I love how they fit on any size bed because you just angle the lock and tighten. It's a great product at a better price. 58588



- EM09085
by:

just what i wanted 50278



- EM09085
by:

Excellent service! Received today, well made and heavy duty, plan to install tomorrow. 44104


36
36

Ask the Experts about this Erickson Truck Bed Accessories
Do you have a question about this Truck Bed Accessory?


  • Recommended Stake Pocket Tie Downs to Allow Bolt Through Top
  • The Replacement Stake Pocket Insert for Adarac Custom Truck Bed Ladder Rack # A70432 or the Erickson Stake Pocket Tie-Down Anchors # EM09085 are the most similar to what you are describing. I've linked the page to all of your options to assist. We also have the Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder Racks # TARB-11032-1 along with the Replacement Hardware Kit for TracRac SR Ladder Rack Base Rails # TAHD-21000-A.
    view full answer...

  • Can Ratchet Straps Be Used with Erickson Stake Pocket Tie-Down Anchors
  • The issue with using a stake pocket mount tie down, such as # EM09085, with a ratchet strap is that you can over tighten a strap and cause the tie down to pull out with some force and it could damage the truck or hit someone. If you made it snug but did not try to ratchet it down as hard as you could then it would be fine. The only video we have on this product is the short review video linked for reference.
    view full answer...

  • Fit of Erickson Stake Pocket Anchor on 1995 GMC Pick Up
  • The Erickson Stake Pocket Tie-Down Anchors you referenced, part # EM09085 are a universal-fit item that will fit many different vehicles, therefore, Erickson does not have any specific vehicle fit information. To determine if it will fit the stake pocket of your truck, measure the length and width of the stake pocket opening. The curved plate of the tie down is what actually holds the anchor in place against the underside of the stake pocket opening. The curved plate of the Stake Pocket...
    view full answer...

  • Weight Capacity for the Erickson Stake Pocket Tie-Down Anchors # EM09085
  • WLL stands for Working Load Limit. The Erickson Stake Pocket Tie-Down Anchors # EM09085 that you referenced have a 2,000 lb working load limit when used as a pair. Working load limit means the amount of weight it can secure continuously. Some have a break strength capacity listed as well that is typically quite a bit higher. For securing a 1,050 lb load these anchors would have more than enough capacity and would work well.
    view full answer...

  • Truck Bed Tie Downs for a 1993 Ford F-Series Pickup Truck
  • I do have an option for you but I spoke with my contact at Erickson Manufacturing and they informed me that the Erickson Retractable Tie-Down Anchors for Truck Bed Stake Pockets part # EM01003 will not fit your 1993 Ford F-350. The best option I have for you is the Erickson Stake Pocket Tie-Down Anchors part # EM09085. Unfortunately, we do not have a set of stake pockets confirmed to fit your truck but we have had a customer with luck installing them on a similar 1992 Ford F-Series pickup...
    view full answer...

  • What Size are the Bolts Used in the Erickson Stake Pocket Tie-Down Anchors # EM09085
  • I went out to the warehouse and pulled the Erickson Stake Pocket Tie-Down Anchors, # EM09085, to measure the bolts. I used a set of digital calipers which I show in the video I also made for you. The bolts are 3/8 of an inch. This is good since the hole you already have is smaller and can be enlarged as needed. I would definitely wait to test them out in the holes first before making them any larger just to be on the safe side.
    view full answer...

  • Camper Tie Downs that Attach to Stake Pockets
  • I have a much better solution for you than the part # EM09085 as a camper tie down. The Brophy Camper Tie Downs, part # TDSF, you have referenced are a universal application. The hardware to mount the tie downs to the vehicle are included. These tie downs will fit campers up to 8 feet in length. If you have a larger camper I would recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down. The tie downs wrap around the bed, not in the stake pockets,...
    view full answer...

  • Stake Pocket Tie Down Recommendation for a 1977 FordF250
  • Yes, we do carry a set of stake pocket tie down anchors that will work on your 1977 Ford F250. Check out the Erickson Stake Pocket Tie-Down Anchors # EM09085. These are a universal fit item, but as long as the length of your stake pockets are less than 2-1/2 inches this tie-down will work great for you.
    view full answer...

  • Would the Erickson Stake Pocket Tie-Down Anchors fit a 2008 Chevy, Silverado LT
  • I spoke to my contact at Erickson and she could not confirm that the Erickson Stake Pocket Tie-Down Anchors # EM09085 would work on your 2008 Chevy Silverado, but she did give me some measurements for the # EM09085 for you to compare to the stake pockets of your vehicle to determine if these would fit. The top plate measures 2-1/4 inches by 3-3/8 inches and the arch plate that hooks into the stake pocket measures 1-1/2 inches by 2-1/2 inches. You will want to compare those measurements...
    view full answer...


Do you have a question about this Truck Bed Accessory?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality truck bed accessories for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate truck bed accessory information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Jackie C
Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
David L
Installed by:
Cole B
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.