Access LED Light Strip for Truck Beds - 18" Long - Battery Powered

Ask the Experts about this Access Truck Bed Accessories

• LED Strip Lighting and Battery Charger for Interior of 18-Foot Enclosed Trailer
  The LED strip light I suggest based on your trailer length is the Optronics 17-foot weatherproof model # UCL90CB. This light strip comes on a reel and has a peel-and-stick 3M adhesive backing for easy installation. You can see this item in the linked video. The strip can even be cut to length. Multiple strips can be linked together using parts # A90P1B and # A90PB which will make it easy to link lights strips on each side of the trailer as well as on the ceiling. I do recommend using...
  view full answer...
• How to Change the Automatic Shut Off Setting for Access LED Light Strips
  To adjust the automatic shut off of the Access LED Light Strip # A80312 will require you to remove the lid and move the timer selector from one of the three available positions. I attached a picture that shows where the selector is.
  view full answer...
• Does Access LED Light Strip for Truck Beds Have a Motion Sensor That Can be Turned Off
  The Access LED Light Strip for Truck Beds # A80312 actually has a push-button to turn it on so you don't have to worry about any movement in your truck bed keeping the light on and wearing the batteries out. The automatic feature is for shutting the light off. This way if you forget to turn it off before leaving your truck bed you can rest assured that your batteries won't be drained. The only time that the battery draining would be an issue is if you disable the automatic shutoff feature. Attached...
  view full answer...
• Can Wires on Access Battery Powered LED Light Strip be Cut and Extended
  You could extend the wires on Access LED Light Strip # A80312 if you wanted to. It would not be a problem unless you tried to extend it much further than 3 or 4 feet. However, doing so will void the warranty. Another option is to use # 3375623755 which you can wire up to the vehicle battery and place wherever you want. I have linked videos on both parts for you.
  view full answer...
• Can Access Battery Powered LED Light Strip be Trimmed Down to 12 or 14 Inches
  The internal ground and circuitry on battery powered LED light strip # A80312 is a loop that goes from the battery box, down to the end of the strip, and back. So cutting it can cause the circuit to not be completed and it would not work in that scenario. Folding it over is one possible solution. We have a 12 inch strip # A70380 but it doesn't have a battery pack of its own. I have linked a video showing an example installation for you.
  view full answer...
• Dimensions of the Battery Box of the Access LED Lighting System for Truck Beds
  I went and pulled an Access LED Lighting System part # A80312 from our warehouse to measure the dimensions of the battery box. I found that the length of the box is 3-1/2 inches, the width is 2-1/8 inches and the depth of the box is 15/16 inches.
  view full answer...
• What Are the Dimensions of Access LED Lighting System for Truck Beds # A80312
  The Access LED Lighting System for Truck Beds # A80312 measure 18-inches long x 1/4-inch wide. This lighting system has 30-LEDs and requires 3 AA batteries for operation.
  view full answer...
• Options for Adding Interior Lighting to Enclosed Cargo Trailer
  For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside lights separate from the trailer's exterior lights, I suggest adding a separate 12V battery to the trailer interior and installing one or more LED-type lights that are bright yet highly efficient. In order to power interior trailer lights from...
  view full answer...
• Can LED Lights be Added to the Rhino-Rack Roof Basket RMCB
  We have several cool options that would allow you to add LED lights to the Rhino-Rack cargo basket # RMCB. We have options for lighting up the basket itself so you can see your cargo, and options for lights to mount on the basket to light up the trail. One option for lighting up the cargo in the basket that does not require connecting to the vehicle battery is a battery powered light strip such as # A80312. Two or three of these with their battery packs zip-tied to the basket would...
  view full answer...
• Recommended LED Light for Interior of Trailer Tongue Tool/Storage Box
  The Command LED Bullet Clearance Light # 328-003-183CW will mount fine in a trailer tongue tool or utility box with 14- or 16-gauge material but I have another item to suggest that you might find to be easier to install and also more effective for your application. The Access LED Light # A80312 is an 18-inch LED strip light that has its own battery power pack that uses 3 AA batteries. This item means no drilling or cutting into your box, no need to wire anything to the vehicle and...
  view full answer...
• Battery Powered LED Light Strips for Truck Beds
  In addition to the 12 inch Access LED lights # A70380, there is also an 18 inch, # A80312 (runs off of 3 AA batteries), 24 inch, # A80296, 39 inch, # A80150, and 60 inch length, # A80170. All but the 18 inch length run off of a 12 volt system (vehicle battery). If you have or made a 12 volt battery pack that you could also mount in the truck bed you could attach the other lengths to it to power the lights. Electronics shops like Radio Shack might have what you need to make that happen. We...
  view full answer...
• LED Truck Bed Lighting Strip Options Longer than 12 Inches
  Yes! For the 60 inch Access LED light strip use # A80170. And for the 39 inch strip, use # A80150. There is also a 24 inch model, # A80296. And there is an 18 inch, battery powered model, # A80312. We got you covered! We have many truck bed lighting options. I have included a link to all of them for you to the right.
  view full answer...

Do you have a question about this Truck Bed Accessory?