Malone MicroSport Trailer for 4 Kayaks - J-Style - 13' Long - 800 lbs

Malone MicroSport Trailer for 4 Kayaks - J-Style - 13' Long - 800 lbs

Item # MPG462G2

lowest price pledge

Retail:$2,009.00

Our Price: $1,808.10

You Save: $200.90
Trailers

This item qualifies for Free Shipping

Shipping Weight: 287 lbs

Quantity: 
In Stock, Ships Today
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Videos


  • Roof Rack on Wheels
  • Malone
  • 800 lbs
  • 13 Feet Long
  • 2 Inch Ball Coupler
This upgraded MicroSport trailer lets you carry (4) 75 lb kayaks on their sides. Full-size spare tire kit mounts to your trailer tongue. Straps and tie-downs included. Marine-grade galvanized steel resists corrosion. Lowest Prices for the best trailers from Malone. Malone MicroSport Trailer for 4 Kayaks - J-Style - 13' Long - 800 lbs part number MPG462G2 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (6)
  • Q & A (7)
  • Videos (1)
  • Photos
  • Why etrailer?

Malone Trailers - MPG462G2

This upgraded MicroSport trailer lets you carry (4) 75 lb kayaks on their sides. Full-size spare tire kit mounts to your trailer tongue. Straps and tie-downs included. Marine-grade galvanized steel resists corrosion.


Features:

  • Upgraded MicroSport trailer lets you carry 4 kayaks
  • 78" Square crossbars with J-style carriers transport kayaks on their sides
    • Padded carriers protect boats from scuffs and scratches
    • Integrated D-rings provide anchor points to easily secure gear
    • 15' Load straps secure your boats to the trailer
  • Lockable spare tire kit lets you carry a spare tire on your trailer's tongue
    • Full-size spare tire ensures your trip isn't hindered by a blowout
  • Extended, reinforced tongue lets you transport boats up to 20' long
    • Also provides clearance for tight turns
  • Trigger-latch-style coupler attaches to a 2" ball
    • Lift handle allows for easy maneuvering while hooking trailer up to your vehicle
    • Skid plate keeps coupler off the ground when not in use
  • Leaf spring suspension system reduces shock from rough roads
  • Steel fenders help protect your gear from dirt, mud, and water
  • Submersible tail lights and side markers increase safety and visibility while towing
  • Marine-grade, galvanized steel construction resists rust and corrosion from salt water environments
  • Galvanized steel wheels have DOT-compliant tires
  • Assembly required - includes hardware, brackets, wiring, and safety chains
    • 4-Way flat trailer plug connects to vehicle
  • Licensing and registration paperwork included
  • Made in the USA


Specs:

  • Maximum boat capacity:
    • 75 lbs per boat
    • 20' long
  • Trailer weight capacity: 800 lbs
  • Crossbar weight capacity: 450 lbs
  • Crossbar spread: 44" - 63"
  • Trailer dimensions: 13' 3" long x 78" wide x 30" tall
  • Coupler height: 18"
  • Coupler ball size: 2"
  • Trailer tongue dimensions: 2" wide x 3" tall x 90" long
  • Wheel dimensions: 12" diameter
  • Wheel bolt pattern: 5 on 4-1/2"
  • Tire size: 4.80-12"
  • Tire load range: C
  • Speed Rating: 75 mph
  • Weight: 240 lbs
  • 5-Year warranty


MPG460G Malone MicroSport Trailer - Galvanized Steel Wheels

MPG117MD Malone J-Pro 2 Fixed Arm J-Style Kayak Carrier - Roof Mount

MPG465 Spare Tire for Malone MicroSport Trailer - 12" Galvanized



MPG462G2 Installation InstructionsInstallation Details MPG462G2 Installation instructionsMPG462G2 Installation InstructionsAlternate Instructions MPG462G2 Installation instructions


California residents: click here


Video of Malone MicroSport Trailer for 4 Kayaks - J-Style - 13' Long - 800 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Malone 4 Boat MicroSport Trailer Review and Assembly

Colin: Hey, everyone, it's Colin here at etrailer. Today we're going to take a look at one of our Malone MicroSport Trailer kits. In this particular kit, you're going to get the MicroSport trailer itself, the spare tire kit, which is mounted to the front, and then you're also going to get four Malone J-Pro-2 kayak carriers. That's going to allow you to get up to four kayaks loaded and secured to take with you to your destination.The great thing about this trailer is that it's basically a roof rack on wheels. We have 78-inch-long cross bars, which is plenty of space to get all four of our carriers loaded up and secured. Obviously it's pretty difficult to try to fit four kayaks on your roof rack, and even if you can do that, you're probably going to be riding over that weight limit of the roof rack anyway.

So with the trailer, you can safely get your kayaks loaded, secured, and to your destination.With the J-Pro carriers, you are going to get all the straps included to secure your kayaks. We're also going to have a very nice foam padding. It's very soft. You can see the kayak making contact with it right now. That's going to help make sure that no scratches or abrasions occur on your kayaks during your trip.

The trailer is also going to create more space on top of your roof, in case you want to carry other things up there, whether you need to haul two more kayaks, maybe a bike rack or even a cargo boxAnd with the trailer, it's going to be a lot easier to load and unload your kayaks. If you got a roof rack on top of your vehicle, it could be a hassle sometimes to have to get that kayak above your head, and onto the carrier. Especially if you have a height restriction, you may need that extra set of hands. With this trailer, it's really at my chest level right now. I can just get my arm under it, get it off the trailer, and head to the water.

And when you're done on the water, it's just as easy to get back on the trailer.When it comes to loading a kayak on the roof rack, you're going to have to get up on your tire. You got to reach over it. I tried to reach the back of your J-Style carrier, to get the strap run through it, but this one, you can just come right over top, walk to the back.Then we can just bring the strap underneath, making sure we get it behind the D-Ring of the trailer. Go through the felts next to our buckle, which is going to protect our kayak from any type of scratches or abrasions occurring from our metal buckle. Just cinch it down, and tie off the excess.Now just a little tip.

It is going to be the easiest to get your middle two kayaks loaded and strapped down before you load your outside ones. Now the trailer is also going to be very easy to hook up and unhook. What we'll do is, we'll come in, we'll undo the coupler, we'll get our safety chains off, and then our wiring. Now the weight capacity for this trailer is going to be 800 pounds.Obviously, we're not really close to that right now, so it is light enough where you can just pick it up with the handle right here. We have a rubber grip on there, so even with the little bit of rain we're having right now, we still can get a good grip, take it off of our two-inch ball, and we can push it into our garage, and it's going to be ready for the next time we need it.Now we got the trailer inside of our garage, and unloaded, so we can have a closer look at it. It is going to have an all galvanized steel construction that's going to help resist rust and corrosion. And it's a little bit better than some other trailers out there that may have plastic senders or other parts, as those parts could wear down a lot easier, or even break a lot sooner, meaning you got to replace them a lot more. In the case of this trailer, they're going to last a long time.We are going to have D-Rings on the ends of all of our crossbars. Those can be used for more tie down points, if for some reason you want to use your trailer to secure items without a carrier.There are going to be two leaf springs with your trailer that are attached to your axle, using some new bolts. Those are going to absorb a lot of impact that you might encounter on the road, and it's also going to absorb a lot of road vibration that you might get at highway speeds. The two tires, as well as this spare on our trailer, are going to be good for speeds up to 75 miles per hour, so they're going to do just fine on the highway.Our steel fenders are going to do a great job of making sure that our tires don't throw up any dirt or debris onto our kayaks. Now we have our spare tire mounted at the part of the trailer where the tongue meets the rest of the frame. That's just where the most surface area is going to be for our tire to sit on. We have a U-Bolt coming up from the bottom through two of the lug nut holes.Then we have some threaded brackets that are tightened down, making sure that our tire is secure. There is also an option to add a padlock right here, to make sure you can add some theft deterrent to your tire.All four of our carriers are going to install the exact same way. It's going to use a bolt, wingnut, and rubber coated bracket assembly. It's going to be a flap we got to pull up on top of our carrier. We'll drop that bolt down through. Then we'll close that flat, to make sure that that bolt can't rub up against our Kayak.Now, on the bottom, we'll just take our rubber coated bracket and bring it up, install the wing nut. We already have the other side partially installed, so now we'll just tighten down both sides, now that they're even. It doesn't have to be too tight. Just want to make sure it's snug, like so.Now I also really like how easy it was to get the wiring installed. We don't have to run it through any type of tubing. It is going to be open on the inside right here, so we just have to run it all the way through. Using included clips to get it all organized, and into the frame of the trailer. And then, when we got back to the lights, all we had to do was use the bullet connectors, and just plug them in.Our LED lighting system is gonna be very bright. It's going to make sure that it's visible even during the day, when the sun is out. We'll also have a light underneath our driver's side tail light that's going to illuminate our license plate, making sure that's visible at night. We're also going to have two side marker LED amber lights, which are going to make for great auxiliary safety lights.If you have more than two kayaks in your household that you need to haul, this is going to be a great option. Really, it gets difficult to get more than two kayaks on a roof rack. It can happen on some applications, but it just gets very difficult to get them up there, and then get them strapped down, without damaging your vehicle at all. Especially if you have four kayaks, this option is going to allow you to safely get them all loaded up and secured, and then get them to in front of your destination.As far as assembly simply for the trailer, it is going to take a little bit of time, but it's not too difficult as long as you follow the instructions. Or you can follow along with us as we do it right now.Now the first thing we did was, we set up the frame how it's going to be put together. You might notice that we do have it upside down. We're going to put it together that way, so that it's a little bit easier to get the spring and axle assembly installed.Now the first thing we're going to do is get the brackets for our spring and axle assembly installed. The C-shaped ones are going to go on the back of our trailer, while the U-shaped ones go on the front. They're all going to bolt together the same way. You can see right here, just the two holes on the frame of the trailer.The bracket sits right on top, and we just drop a couple of bolts through the bracket and the frame of the trailer. Take a couple of locknuts, and you thread them on. You want to make sure you're installing the locknuts on the inside of the frame of the trailer. Now we'll just grab our wrench and socket, and tighten it down.Now at the front end of the tongue of our trailer, we're going to feed our wiring. It's going to go all the way through the tongue and towards the frame of the trailer. How we know that we have the front end is one, there's a sticker right here. The warning sticker's going to go towards the front of the tongue. We also have that triangle set of holes right there. That's also, lets us know, it's the front. So we're just going to let gravity do the work, and just feed the wire all the way through.Now we have it out the other end. We're just going to feed it through the connecting bracket right here. Just leave it right there. Now we're going to take the bolts included in our kit. This is going to be the longest bolt of your assembly. We're just going to pull the frame, line it up inside that bracket.Because our trailer is upside down right now, we're going to pick it up and then feed it through the bottom. inaudible 00:08:29, just like that. Now we'll get a flat washer and a locknut, and all we're going to do is hand tighten it for now. And we have the bracket slid in. We're just going to get the carriage bolts installed on the bracket.On the inside, we'll go flat washer and locknut. Just like the bracket bolt, we're just going to hand tighten it for now, and then repeat this for the other side. Now we'll just apply a flat washer to our bolts, and feed them through the two slots, connecting the tongue of our trailer to the frame. Go flat washer on both sides again, and then hand tighten our locknuts.With our carriage bolts, we're now going to get the center beams installed on the frame with the locknuts on the inside, just hand tightened. Make sure you go around and get the other six hand tightened as well.Now we're going to go around and get all the bolts tightened down. We're going to start here at the back with the carriage bolts, on the center beams in our frame, and then make our way up towards the tongue of the trailer.Now we can go ahead and assemble our spring and axle assembly. There's going to be a bolt right here, it goes into the hole on our axle. Now we'll put the U-Bolt plate on that knob, and we'll bring our U-bolts up through the bottom, and then put two locknuts on. Do our second U-Bolt, and now we'll just tighten everything down.We'll repeat this process for either side, making sure we set this spring in the exact same formation. Now we'll set our assembly in place, making sure to get the flat part of the springs into the C brackets, and then the eyeholes of our springs into the U brackets. Now we'll feed the bolts through the eyes of our springs, put the locknut on, hand tighten on both sides.Now we're ready to get our wheels installed. While the frame is still upside down, I'm going to take our hubcap first, and slide it through the back of the wheel, like so. That'll catch on the sides, and we'll put it on the axle of our trailer.And now we can get our lug nuts hand tightened. Now I want to start a pattern. We'll go around and tighten down all of our lug nuts. Then repeat this process for the other side.Now we're going to get the lights and brackets assembled. The brackets right here are going to go on the side of our trailer. Then you see the big hole right there is where our light is going to go. So just put it on the side, stick a couple of bolts in there, and let's put some locknuts on and tighten them down.On the driver's side of your trailer, don't forget, once you get the bolts through the slots, to put your license plate holder on there as well. Now we'll plug in the wiring from the tongue of our trailer, to the wiring that's going to go back to our lights.From there, just make sure you run the appropriate wires to the appropriate lights, and then, don't forget to clip your wiring to the sides, to make sure it stays out of the way. Now you will have a little bit left over right by the bracket, which is connecting both the sides.However, make sure you don't get the two heads right here inside the tongue of the trailer. That bow right there is to prevent them from being pulled by the other side and disconnecting your wires. But if you want, you can just grab a zip tie, put it right there, and zip tie it up to clean it up a little bit.When installing the brackets on your fenders, we're just going to set it from the bottom, apply our bolts through the top, hold them there, and then apply our locknuts. and then repeat this for the other side. Now with a flathead screwdriver, we're going to hold the other side of the bolt in place, and then tighten down all four bolts.Now, with a flat washer and a bolt, We're just going to feed it through that center hole right there, and then apply another flat washer, and a locknut, and do that for both sides. Now we'll just tighten up all the boltS.Now, on our coupler and safety chains, we'll get the safety chains installed first. We have a flat washer and the ends of our two chains on there. We'll push it up through that bracket and hold it there. Then we'll just apply a flat washer and a locknut. Just get that threaded on there and tightened down, and now we'll tighten it down all the way.With our coupler, we'll just set that down and line it up with the holes, before we install the bolts. You want to pick which side the handle goes on. It doesn't necessarily matter too much, just whatever you feel more comfortable with. We'll apply the bolt through the handle, and then through the coupler, get it all the way through, and then the other bolts, and then apply locknuts to the other side. Now we'll tighten everything down.Now we're going to start assembling our upper deck with the crossbars. The support bar's going to go, one on the back end of the trailer, the other one's going to go about 48 inches up towards the front, and we just drop our U-Bolts on top, bring the plate, and then we'll put two lock nuts on. Once you have it set where you want it, we'll tighten everything down.Now we have one of our crossbars just sitting on top of the support bar right here. We're going to take these brackets, it's going to go over the top, like so. Make sure you line up the bottom holes, with the bolt all the way through. Then we'll put a locknut on there, and now, with the crossbar, what we're going to do, is that's going to come straight up, and the second bolt's going to sit right under it. And do this for both sides.Then we'll go around and tighten all four bolts. Now on both of your crossbars, be sure that the one hole on the outside of each side of the bar is facing towards the inside of the trailer.Now, final assembly is going to be to get our D-Rings installed in those holes. I'm just going to apply a flat washer, and then put the bolt through there. Now I'm going to slide my finger in, and line it up with that hole, and then start to thread it on there.Once you've gone as far as you can with your hands, what I'm going to do is, this is a nice little trick. Take a pair of needle nose pliers. We're going to feed the pliers in and clamp down on that, with a locknut. Get a good grip. Now we'll tighten it down.Doesn't have to be super tight, but you can see it's pretty snug. Now just repeat this step for all the other sides, and then put your end caps on.Well, thank you all for watching. That's going to do for our look at the Malone MicroSport Trailer.


Customer Reviews

Malone MicroSport Trailer for 4 Kayaks - J-Style - 13' Long - 800 lbs - MPG462G2

Average Customer Rating:  5.0 out of 5 stars   (6 Customer Reviews)

This upgraded MicroSport trailer lets you carry (4) 75 lb kayaks on their sides. Full-size spare tire kit mounts to your trailer tongue. Straps and tie-downs included. Marine-grade galvanized steel resists corrosion.

- MPG462G2
by:

Great trailer easy to put together. Hardest part is getting the title and bill of sale . Seems to me that would come with trailer. I have been waiting two weeks on my title so I can use it and I’m still waiting. 657032



- MPG462G2
by:

I just received the parts for the trailer and will be putting it together shortly. I plan on transporting my recent purchase of 4 Kayaks. I like the fact that I can load the Kayaks a little more closer to the ground then having to lift them up high. 651542



- MPG460G
by:

Review from a similar Malone MicroSport in Trailers


Great trailer for my Hobie PA12 kayak. Pricing for this item is the same everywhere so service makes all the difference - etrailer and their rep Kathy delivered. They provided excellent communications and updates on shipping and a timely receipt of the MCO made it easy to title. Overall a professional experience. Thank you! 553537



- MPG460G
by:

Review from a similar Malone MicroSport in Trailers


The search for a trailer to carry our two Hobie Kayaks was extensive. My main concern was finding one that could carry the two heavy (83 lbs. ea.), travel at highway speeds and be easy to use. This Malone MicroSport trailer has turned out to be great. It is easy to get our kayaks on and off the trailer at the lake. Rhino-rack Nautic roof rack carriers were installed to carry the kayaks because I wanted them to provide conforming support for the hulls. They have proven to be capable of carrying the weight of the Hobie kayaks and the kayaks can be slid on them when loading/off-loading. This was a primary concern because capacity is not listed with most carriers. Assembly of the trailer was fairly easy and I would rate it requiring moderate mechanical skill. Before doing this assembly I watched a fantastic video online, walking you through the assembly. I would add just a couple things. Those include: 1. It would be easier to do most of the assembly on a table, until you get to the wheels. Especially true for us older folks that don't bend so well. 2. Be sure to read the wiring harness installation a few times before installation. It is tricky, but will work if you follow the instructions correctly. There is barely enough wire to connect the tail lights. I wound up having to splice some wire because of problems I had. 3. You will need to get some grommets to protect the wires going through the holes in the frame. They are not supplied with the kit. Other than that the trailer works great,very solid and have had no issues traveling at highway speeds. Attached is a photo of the trailer with the kayaks. 578983



- MPG461GS
by:

Review from a similar Malone MicroSport in Trailers


This is a sturdy trailer and I'm very satisfied with the product and process. The instructions were probably the most thorough I've ever seen. The title and bill of sale come separately probably so it can't be stolen with all the paperwork 607745



- MPG461JB
by:

Review from a similar Malone MicroSport in Trailers


The Malone trailer is a high quality product, much nicer than I had anticipated. I use it to transport my 10 foot RIB, which is very light. I needed something small, but substantial to tow smooth. I recently used it to tow the boat 6 hours (350 miles) down to Virginia, and then back a week later, and it towed wonderfully. Also, the staff at etrailer and also at Malone were pretty great to work with. I couldn't recommend this trailer more, and I plan to do all my trailer business with etrailer. 545168


6
6

Ask the Experts about this Malone Trailers
Do you have a question about this Trailer?


  • Small Trailer to Carry 2 Kayaks and 2 Bikes with a 2017 Honda Ridgeline
  • There is a version of the Malone trailers that comes with 2 kayaks and 2 bikes. It is # MPG461KB and it is the ideal solution for you. The other option is to carry the bikes in the bed of your 2017 Honda Ridgeline and keep the kayaks on the roof. You may have already seen these but a great solution is to carry the bikes in the bed of your 2017 Honda Ridgeline and keep the kayaks on the roof by using a tailgate pad such as # Y07410. These pads actually work quite well. I was pleasantly...
    view full answer...

  • Carrying 4 Kayaks and Storage Trunk on Malone MicroSportXT Kayak Trailer
  • Along with the MicroSportXT # MPG460XT you could simply add 4 of the Malone J-Pro Kayak Carrier # MPG116MD. You may want to consider a more economical option with the Malone MicroSport Trailer with J-Pro Kayak Carriers # MPG462G2 and add Storage Trunk for Malone MicroSport and XtraLight Trailers # MPG481. The Microsport with J-Pro Carriers comes with the ability to carry 4 kayaks, has a 375 lbs capacity, measures 164" long x 65" wide and has a coupler that attaches to a 2" hitch ball....
    view full answer...

  • Parts Needed to Use Hitch-Mounted Bike Rack and Tow Malone Kayak Carrier Behind RV
  • You will definitely want your Malone kayak trailer like the MicroSport # MPG462G2 as level as possible when hooked up to your Winnebago. We do have a nice selection of ball mounts that feature the type of drop you are needing from the RV. The Curt Ball Mount # C45100 features a 7-1/2 inch drop (or a 6-1/4 inch rise) and has a towing capacity of 5,000 pounds. I have attached a link that will take you to our complete selection of ball mounts that you can look through in case you find that...
    view full answer...

  • Trailer Recommendation for Transporting Kayaks
  • We do offer trailers that have kayak racks installed on them to make transporting kayaks easy. For a trailer with J-style carriers designed for carrying up to 4 kayaks we have the Malone MicroSport Trailer with J-Pro Kayak Carriers # MPG462G2 or if you only need to carry 2 kayaks we have the 2 kayak version part # MPG461G2. These come with straps needed to secure the kayaks as well so you'd only need the trailers and you'd be ready to go.
    view full answer...

  • What is the Shortest Kayak that Will Fit the Malone MicroSport Trailer # MPG462G2
  • The Malone MicroSport Trailer # MPG462G2 has a bar spread of approximately 47-1/2 inches on center. There is some adjustability to make the bar spread slightly less, maybe and inch or so, but not much. A kayak would definitely have to be over 4 feet long to sit on the cradles.
    view full answer...

  • Availability of Ladder Rack for Carrying Kayaks on 2017 Ford F-150 with TruXport Tonneau Cover
  • We do have some other options for you to carry your kayaks with your 2017 Ford F-150 but unfortunately since the TruXport # TX298301 (6-1/2' bed) or # TX297701 (5-1/2' bed) covers the stake pockets of your side rails there are no ladder rack options for you to use. Instead you will need to go with a roof rack system or a trailer like the Malone # MPG462G2. If you don't want to tow them using a trailer please let me know what kind of cab you have and I can help you with a roof rack system.
    view full answer...

  • Will Malone Microsport Trailer Be Towed Easily with 2006 Toyota Corolla
  • Yes, the lightweight Malone MicroSport Trailer part # MPG462G2 will work great with the towing setup you mentioned for your 2006 Toyota Corolla. Only thing you'll need additionally is trailer wiring like part # 55542 and you'd be set.
    view full answer...


Do you have a question about this Trailer?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Colin H
Video Edited:
Dustin K
Edited by:
Daron K
Written by:
Jonathan S
Updated by:
Jessie B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.