1. Trailers
  2. Malone
  3. Roof Rack on Wheels
  4. 13 Feet Long
  5. 800 lbs
  6. 2 Inch Ball Coupler
Malone MicroSport Trailer for 2 Kayaks - J-Style - 13' Long - 800 lbs

Malone MicroSport Trailer for 2 Kayaks - J-Style - 13' Long - 800 lbs

lowest price pledge
Retail:$2,266.80
Our Price: $1,700.10
You Save: $566.70
Trailers
This item qualifies for Free Shipping
Shipping Weight: 271 lbs
Quantity: 
In Stock, Ships Today
Malone Trailers - MPG461G2
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

This upgraded MicroSport trailer lets you carry (2) 75 lb kayaks on their sides, freeing up room for more gear. Full-size spare tire kit mounts to your trailer tongue. Straps and tie-downs included. Marine-grade galvanized steel resists corrosion. Lowest Prices for the best trailers from Malone. Malone MicroSport Trailer for 2 Kayaks - J-Style - 13' Long - 800 lbs part number MPG461G2 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (10)
  • Q & A (12)
  • Videos (1)
  • Photos
  • Why etrailer?

Malone Trailers

  • Roof Rack on Wheels
  • Malone
  • 13 Feet Long
  • 800 lbs
  • 2 Inch Ball Coupler

This upgraded MicroSport trailer lets you carry (2) 75 lb kayaks on their sides, freeing up room for more gear. Full-size spare tire kit mounts to your trailer tongue. Straps and tie-downs included. Marine-grade galvanized steel resists corrosion.


Features:

  • Upgraded MicroSport trailer lets you carry up to 2 kayaks and additional gear
  • 78" Square crossbars with J-style boat carriers transport kayaks on their sides
    • Frees up space to carry additional gear between the boats
    • Integrated D-rings provide anchor points to easily secure gear
    • 15' Load straps secure your boats to the trailer
  • Lockable spare tire kit lets you carry a spare tire on your trailer's tongue
    • Full-size spare tire ensures your trip isn't hindered by a blowout
  • Extended, reinforced tongue lets you transport boats up to 20' long
    • Also provides clearance for tight turns
  • Trigger-latch-style coupler attaches to a 2" ball
    • Lift handle allows for easy maneuvering while hooking trailer up to your vehicle
    • Skid plate keeps coupler off the ground when not in use
  • Leaf spring suspension system reduces shock from rough roads
  • Steel fenders help protect your gear from dirt, mud, and water
  • Submersible tail lights and side markers increase safety and visibility while towing
  • Marine-grade, galvanized steel construction resists rust and corrosion from salt water environments
  • Galvanized steel wheels have DOT-compliant tires
  • Assembly required - includes hardware, brackets, wiring, and safety chains
    • 4-Way flat trailer plug connects to vehicle
  • Licensing and registration paperwork included
  • Made in the USA


Specs:

  • Maximum boat capacity:
    • 75 lbs per boat
    • 20' long
  • Trailer weight capacity: 800 lbs
  • Crossbar weight capacity: 450 lbs
  • Crossbar spread: 44" - 63"
  • Trailer dimensions: 13' 3" long x 78" wide x 30" tall
  • Coupler height: 18"
  • Coupler ball size: 2"
  • Trailer tongue dimensions: 2" wide x 3" tall x 90" long
  • Wheel dimensions: 12" diameter
  • Wheel bolt pattern: 5 on 4-1/2"
  • Tire size: 4.80-12"
  • Tire load range: C
  • Speed Rating: 75 mph
  • Weight: 240 lbs
  • 5-Year warranty


MPG460G Malone MicroSport Trailer - Galvanized Steel Wheels

MPG117MD Malone J-Pro 2 Fixed Arm J-Style Kayak Carrier - Roof Mount

MPG465 Spare Tire for Malone MicroSport Trailer - 12" Galvanized

Item # MPG461G2

Installation Details MPG461G2 Installation instructionsAlternate Instructions MPG461G2 Installation instructions


California residents: click here


Video of Malone MicroSport Trailer for 2 Kayaks - J-Style - 13' Long - 800 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Malone MicroSport Trailer with J-Pro 2 Kayak Carriers Review

Colin: Hey, everyone. It's Colin here at eTrailer. Today we're going to take a look at one of our Malone MicroSport trailer kits. Now, in this kit you're going to get the MicroSport trailer itself, you're going to get the spare tire kit, as well as two J-Pro2 style kayak carriers from Malone.Now, this trailer is going to be a really great setup. It's going to allow you to transport two kayaks to and from your destination. Just one of the things I really like about it is that it's basically a roof rack on wheels, and that me personally, you know, I'm about 5'9", having a Jeep, it's very hard for me to get that kayak up there.Not because it's too heavy, but because I'm a little shorter.

I got to open the door, and probably get an extra set of hands. With this trailer, it's so easy for me just to get my hand under it and just get it up off of the carrier, and then at the end of the day you're probably going to be pretty tired from being on the lake or on the water all day with your kayak.So, the last thing you want to do is try to muscle it up and get it on top of your roof. You saw how easy that was just for me to walk over here, set it on the carrier, now we can get our strap secured.And again, with it being that level with me, I don't have to struggle with reaching on my roof, maybe standing on my tire to be able to get my strap secured. I can just toss it right over, I can reach the J carrier from the other side, and pull the strap all the way out.Bring it under our crossbar, through the felt, which is a great protector for your kayak from the metal buckle, and just like that it's secure. A lot quicker than having to struggle on your roof, and then just tie off your excess.Or if you do like having a roof rack on your vehicle, you're going to create more space on the top of it.

We can get some bike racks up there, or even a cargo box. Anything to that nature. On trailer, we're going to have 78 inch long crossbars as well as the two J-style kayak carriers.Now, the benefit of the J-style carrier is that it does conserve space on your trailer. Right now, we only have two kayaks up there, but they're pretty spaced out, as well as still having a lot of space on the ends of the crossbars, so you do have the option to get other accessories on your trailer, whether you've got a bike rack, or even another kayak carrier, you can just adjust the two that come with your kit and you can get other stuff loaded.With the J-Pro carriers, we are going to have nice foam pads on the bottom that are supporting our kayak. You can see right here, the kayak's sitting nicely on there.

The foam's going to do a great job of not causing any type of damage on your kayaks. And on the backside we are going to have two more foam pads, which, again, are going to protect our kayak.There's going to be some hook and loop sleeves around them to help prevent a lot of wear and tear from occurring on the foam. This trailer's also going to be very easy to hook up and unhook from your vehicle. At the end of the day, you may be very tired. The last thing you want to do is try to unload your kayaks, whether you're unloading them from your roof or even from your trailer.All you're going to have to do is unhook your trailer, and get our safety chains off, wrap those around our tongue, and then get our wiring unhooked.

From there, we can just get it off of our vehicle with ease. The trailer is going to have an 800 pound weight capacity, but as you can see with our current load, we're not even close to touching that.So, using the nice, rubber handle, which is going to be good for grip, I can get it off of my ball mount and then push it into my garage so my kayaks can stay attached and they're ready to go out for the next time.Now we have the trailer inside our garage, and unloaded, so we can have a closer look at it. It is going to have an all galvanized steel construction. That's just going to be very tough and durable. It's going to help resist rust and corrosion. A lot of other trailers you might see will have plastic components to them which can wear down a lot sooner than the galvanized steel, or they could even break a lot sooner, and you're not going to have to replace those parts.With the kayaks off, you can really see the foam on both sides of the carrier, and how it's going to protect your kayak. Now, on this platform, right here, we're going to have a hard foam with a coating on it. That's going to, again, help protect your kayak from any type of damage.Now, if for some reason you want to strap something down straight onto the crossbars, the D-rings on each end of the crossbars are going to help you secure it for a safe trip. The lightning system on our trailer is going to be very easy to put together.You can see, all we had to do was run it through the trailer frame. It includes these clips where we can clip it up, and then it's going to be out of the way from our wheels, and our leaf springs, and then when you get it to your lights, you don't have to splice it or do anything like that.We have these bullet connectors from Malone. All you have to do is just plug it in and you're going to have power to your lights. Our LED lighting system is going to be very bright, which means it's going to be visible even during the day when the sun is shining, and under our driver's side taillight, we are going to have another light which is illuminating our license plate, making sure that's visible at night.And we're also going to have two LED amber lights on the sides of our trailer, which is going to be great for auxiliary safety lights. Both of the tires that come with the trailer, as well as the spare, are all going to be ready for speeds up to 75 miles per hour, so you're going to do just fine on the highway with these;.The galvanized steel fenders are going to do a great job of making sure that the tires don't throw up any type of dirt or debris onto your kayaks. We're going to have two leaf springs connected to our axle. It's going to help absorb a lot of the impact you may encounter on the road, as well as helping cancel out a lot of the road vibration that you may experience at those highway speeds.The best place for your spare tire is going to be at the part of the frame where the tongue is connected to the rest of the trailer. There's just going to be the most surface area for your tire to sit on. We're going to have a U-bolt coming up from the bottom.It's going to come up through two of the lug nut holes on your tire, and then we have these threaded brackets which threat al the way down until they're touching the tire. It's going to make for a secure fit on the trailer. We're also going to have an option to add a padlock so you can add more security to your spare tire.It's always a good idea to have that spare tire, just because you never know what could happen out on the road. For some reason you need to pull over because you have a blown tire on your trailer, the last thing you want to do is leave the trailer behind with all your equipment on it to try to get a new tire.Now, this trailer does have a lot of great features. I just really enjoy how easy the lighting was to operate. You don't have to feed wiring all the way through a long tube and then just splice it at the end. It's very easy to get it through the tongue, and then throughout and through the frame of your trailer, and those bullet connectors make it very easy to get your lights operating.Assembly for this may take you about an hour to two hours, but as long as your following the instructions you should get it done fairly easily. Let's go ahead and show you how to do that right now.The first thing we did was we set up the frame how it's going to be put together. You might notice that we do have it upside down. We're going to put it together that way so that it's a little bit easier to get the spring and axle assembly installed.Now, the first thing we're going to do is get the brackets for our spring and axle assembly installed. The C-shaped ones are going to go on the back of our trailer, while the U-shaped ones go on the front. They're all going to bolt together the same way.You can see right here, just the two holes on the frame of the trailer. The bracket sits right on top, and then we just drop a couple bolts through the bracket in the frame of the trailer. Take a couple of lock nuts and thread them on.You want to make sure you're installing the lock nuts on the inside of the frame of the trailer, and now we'll just grab our wrench and socket and tighten down.Now, at the front end of the tongue of our trailer, we're going to feed our wiring that's going to go all the way through the tongue and towards the frame of the trailer. How we know that we have the front end is, one, there's a sticker right here. The warning sticker's going to go towards the front of the tongue.We also have that triangle set of holes right there. That also lets us know it's the front, so we're just going to let gravity do the work and just feed the wire all the way through.Now, we have it out the other end, we're just going to feed it through the connecting bracket right here. Just leave it right there. Now we're going to take the bolt included in our kit, this is going to be the longest bolt of your assembly, and we're just going to pull the frame, line it up inside that bracket, and because our trailer is upside down right now, we're going to pick it up and then feed it through the bottom.Just like that. Now, we'll get washer and a locknut, and all we're going to do is hand tighten it for now. Now we have the brackets slid in. We're just going to get the carriage bolts installed on the bracket. On the inside, go flat washer and the locknut.Just like the bracket bolt, we're just going to hand tighten for now, and then repeat this for the other side, and now we'll just apply a flat washer to our bolts and feed them through the two slots connecting the tongue of our trailer to the frame.Go flat washer on both sides again, and then hand tighten our locknuts. With our carriage bolts, we're now going to get the center beams installed on the frame, with the locknuts on the inside. Just hand tightened, and make sure you go around and get the other six hand tightened as well.Now we're going to go around and get all of the bolts tightened down. We're going to start here at the back with the carriage bolts, on the center beams on our frame, and then make our way up towards the tongue of the trailer.Now we can go ahead and assemble our spring and axle assembly. There's going to be a bolt right here, goes into the hole on our axle, and then we'll put the U-bolt plate on that knob. We'll bring our U-bolts up through the bottom and then put two locknuts on.Do our second U-bolt, and now we'll just tighten everything down. Now we'll repeat this process with the other side, making sure we set this spring in the exact same formation. Now we'll set out assembly in place making sure to get the flat part of the springs into the C-brackets, and then the eyeholes of our springs into the U-brackets.Now we'll feed the bolts through the eyes of our springs. Get the locknut on, hand tighten on both sides. Now we're ready to get our wheels installed while the frame is still upside down. We're going to take our hub cap first and slide it through the back of the wheel, like so.That'll catch on the sides. We'll put it on the axle of our trailer, and now we can get our lug nuts hand tightened. Now, in a star pattern, we'll go around and tighten down all of our lug nuts.Then repeat this process with the other side. Now we're going to get the lights and brackets assembled. The brackets right here are going to go on the side of our trailer then you see the big hole right there is where our light is going to go.So, just put it on the side. Stick a couple bolts in there, and also put some locknuts on and tighten it down.On the driver's side of your trailer, don't forget, once you get the bolts through the slots, to put your license plate holder on there as well. And now we'll plug in the wiring from the tongue of our trailer to the wiring that's going to go back to our lights.From there, just make sure you run the appropriate wires to the appropriate lights.And then don't forget to clip your wiring to the sides to make sure it stays out of the way. Now, you will have a little bit left over right by the bracket which is connecting both of the sides. However, make sure you don't get the two heads right here inside the tongue of the trailer.That bolt right there is to prevent them from being pulled by the other side and disconnecting your wires. But if you want, you could just grab a zip tie, put it right there, and then zip tie it up to clean it up a little bit.When installing the brackets on your fenders, we're just going to set it from the bottom. Apply our bolts through the top. Hold them there, and then apply our locknuts. And then repeat this for the other side.Now, with a flathead screwdriver, we're going to hold the other side of the bolt in place, and then tighten down all four bolts. Now, with a flat washer and a bolt, we're just going to feed it through that center hole right there, and then apply another flat washer and a locknut., and do that for both sides.Now we'll just tighten up all of the bolts.Now onto our coupler and safety chains. We'll get the safety chains installed first. We have a flat washer and the ends of our two chains on there. We'll push it up through that bracket and hold it there, then we'll just apply a flat washer and a locknut.Just get that threaded on there and tightened down, and now we'll tighten it down all the way. Now, with our coupler, we'll just set that down and line it up with the holes. Before we install the bolts, you want to pick which side the handle goes on. Doesn't necessarily matter too much, just whatever you feel more comfortable with.We'll apply the bolt through the handle, and then through the coupler. Get it all the way through, and then the other bolt. We're going to apply locknuts to the other side.Now we'll tighten everything down. Now we're going to start assembling our upper deck with the crossbars. The support bar is going to go, one, on the back end of the trailer. The other one's going to go about 48 inches up towards the front, and we'll just drop our U-bolt on top, bring the plate, and then we'll put two locknuts on.Once you have it set where you want it, we'll tighten everything down. Now we have one of our crossbars just sitting on top of the support bar right here. We've got to take these brackets. It's going to go over top, like so. Make sure you line up the bottom holes with the bolt all the way through.Then we'll put a locknut on there, and now with the crossbar what we're going to do is that's going to come straight up, and the second bolt's going to sit right under it, and do this for both sides. Then we'll go around and tighten all four bolts.Now, on both your crossbars, be sure that the one hole on the outside of each side of the bar is facing towards the inside of the trailer. Now, the final step is going to be to get our D-rings installed in those holes.I'm just going to apply a flat washer and then put the bolt through there. Now, I'm going to slide my finger in and line it up with that hole, and then start to thread it on there. Once you've gone as far as you can with your hands, what I'm going to do is a nice little trick.Take a pair of needle node pliers. We're going to feed the pliers in, and clamp down on that locknut. Get a good grip. Now we'll tighten it down.It doesn't have to be super tight, but you can see it's pretty snug. Now just repeat this step for all the other sides, and then put your end caps on. When getting your J-style carrier in place, you're going to have two bolts that look like this.You're also going to have a nice, rubber coated plate right here which is going to help protect your crossbars from any type of damage. We'll just set it in place. It's nice. It'll fit the crossbars very well, thanks to the indent right there, so it'll set right on top, and then it honestly just balances itself, just like that.We'll bring this under it. Now, it's going to go under the flap right here, so because we can't really get it out unless you have fingernails, I'm going to push the bolt through from the bottom to push that cap up like so.I'm going to hold it open, and then drop the bolt through. From there, just close that flap, and then we'll bring the bracket up and on there. We already have one of the wingnuts on, and then we'll just take the included washer, put it on the bolt, and then our wingnut. Then we'll just tighten up both sides.Well, thank you all for watching. That's going to do it for our look at the Malone MicroSport trailer.


Customer Reviews

Malone MicroSport Trailer for 2 Kayaks - J-Style - 13' Long - 800 lbs - MPG461G2

Average Customer Rating:  5.0 out of 5 stars   (10 Customer Reviews)

This upgraded MicroSport trailer lets you carry (2) 75 lb kayaks on their sides, freeing up room for more gear. Full-size spare tire kit mounts to your trailer tongue. Straps and tie-downs included. Marine-grade galvanized steel resists corrosion.

- MPG461G2
by:

Can't say enough about the quality and prices. Ashley and Bridgette in CS were extremely helpful in helping me get what I needed in a Kayak trailer, and their follow up was extraordinary. Malone trailer is very sturdy, assembly instructions were right on. Paper work for title and registration was sent to me asap after delivery of the trailer. Trailer tows and tracks very well. 697393



- MPG460G
by:

Review from a similar Malone MicroSport in Trailers


The trailer assembly was easy. The most difficult part, if any, was centering the support bars. We just wish it was 'Made in the USA' instead of China. etrailer expediently shipped the (4 total) packages. We were pleasantly surprised how quickly we received them. FYI: The registration documents are mailed separately. We look forward to loading up our kayaks and going fishing. Cheers! 724698



- MPG460G
by:

Review from a similar Malone MicroSport in Trailers


Great trailer for my Hobie PA12 kayak. Pricing for this item is the same everywhere so service makes all the difference - etrailer and their rep Kathy delivered. They provided excellent communications and updates on shipping and a timely receipt of the MCO made it easy to title. Overall a professional experience. Thank you! 553537



- MPG462G2
by:

Review from a similar Malone MicroSport in Trailers


I just received the parts for the trailer and will be putting it together shortly. I plan on transporting my recent purchase of 4 Kayaks. I like the fact that I can load the Kayaks a little more closer to the ground then having to lift them up high. 651542



- MPG460G
by:

Review from a similar Malone MicroSport in Trailers


The search for a trailer to carry our two Hobie Kayaks was extensive. My main concern was finding one that could carry the two heavy (83 lbs. ea.), travel at highway speeds and be easy to use. This Malone MicroSport trailer has turned out to be great. It is easy to get our kayaks on and off the trailer at the lake. Rhino-rack Nautic roof rack carriers were installed to carry the kayaks because I wanted them to provide conforming support for the hulls. They have proven to be capable of carrying the weight of the Hobie kayaks and the kayaks can be slid on them when loading/off-loading. This was a primary concern because capacity is not listed with most carriers. Assembly of the trailer was fairly easy and I would rate it requiring moderate mechanical skill. Before doing this assembly I watched a fantastic video online, walking you through the assembly. I would add just a couple things. Those include: 1. It would be easier to do most of the assembly on a table, until you get to the wheels. Especially true for us older folks that don't bend so well. 2. Be sure to read the wiring harness installation a few times before installation. It is tricky, but will work if you follow the instructions correctly. There is barely enough wire to connect the tail lights. I wound up having to splice some wire because of problems I had. 3. You will need to get some grommets to protect the wires going through the holes in the frame. They are not supplied with the kit. Other than that the trailer works great,very solid and have had no issues traveling at highway speeds. Attached is a photo of the trailer with the kayaks. 578983



- MPG461KB
by:

Review from a similar Malone MicroSport in Trailers


Trailer directions straight forward. All materials identifiable, quality made and on hand. Take your time to do it right. Taking on kayak trip this weekend! 737328



- MPG460G
by:

Review from a similar Malone MicroSport in Trailers


Good quality trailer. Went together easy, had all the parts even though the main packaging was torn open from shippment. Got it licensed with no problems. I will be hauling my 2019 Hobie Outback on this trailer. Also mounted a 6" tube for my fishing poles. Will also be adding the storage box. Have not had it on the road yet. I like the size of this trailer, not very heavy or to large. 670791



- MPG462G2
by:

Review from a similar Malone MicroSport in Trailers


Great trailer easy to put together. Hardest part is getting the title and bill of sale . Seems to me that would come with trailer. I have been waiting two weeks on my title so I can use it and I’m still waiting. 657032



- MPG461GS
by:

Review from a similar Malone MicroSport in Trailers


This is a sturdy trailer and I'm very satisfied with the product and process. The instructions were probably the most thorough I've ever seen. The title and bill of sale come separately probably so it can't be stolen with all the paperwork 607745


Comments
a year later and still 100 satisfied
Michael - 02/24/2020

70246

- MPG461JB
by:

Review from a similar Malone MicroSport in Trailers


The Malone trailer is a high quality product, much nicer than I had anticipated. I use it to transport my 10 foot RIB, which is very light. I needed something small, but substantial to tow smooth. I recently used it to tow the boat 6 hours (350 miles) down to Virginia, and then back a week later, and it towed wonderfully. Also, the staff at etrailer and also at Malone were pretty great to work with. I couldn't recommend this trailer more, and I plan to do all my trailer business with etrailer. 545168


15
15

Ask the Experts about this Malone Trailers

  • Trailer Recommendation for Transporting Kayaks
    We do offer trailers that have kayak racks installed on them to make transporting kayaks easy. For a trailer with J-style carriers designed for carrying up to 4 kayaks we have the Malone MicroSport Trailer with J-Pro Kayak Carriers # MPG462G2 or if you only need to carry 2 kayaks we have the 2 kayak version part # MPG461G2. These come with straps needed to secure the kayaks as well so you'd only need the trailers and you'd be ready to go.
    view full answer...
  • Recommended Parts To Tow Malone Kayak Trailer With 2020 Hyundai Kona Limited
    I recommend Curt Trailer Hitch Receiver part # C11529 which is designed for the 2020 Hyundai Kona as long as it is not the all electric model. There is no drilling required for installation so it is a straight forward install. However, the hitch has Class I a 1-1/4" receiver tube so the bike rack must be compatible with Class I hitches and have a 1-1/4" shank. The tongue weight rating of the hitch is 200 lbs so you want to be sure not to exceed that with the Malone trailer. If your...
    view full answer...
  • Can 2016 Ford F-150 Tow Microsport Malone Trailer MPG461G2
    Yes, the trailer hitch on your 2016 Ford F-150 would easily tow the Malone MicroSport Trailer part # MPG461G2. All you'd need is a ball mount with a 2 inch hitch ball like the Curt # C45036.
    view full answer...
  • How Tall Are the Malone J-Pro2 Kayak Carriers
    The Malone J-Pro2 Kayak Carrier part # MPG117MD which comes with the Malone MicroSport Trailer part # MPG461G2 are 16-1/2" tall. If you need more clearance then you may consider swapping out the Malone J-Pro2 Kayak Carrier with the Malone DownLoader Kayak Carrier part # MPG114MD which are only 5" tall while folded. I have attached a review video of the Malone DownLoader Kayak Carrier for you.
    view full answer...
  • Is Malone MicroSport Trailer for 2 Kayaks # MPG461G2 Safe to Carry 2 Hobie Outback Kayaks
    The Malone MicroSport Trailer for 2 Kayaks # MPG461G2 that you referenced comes with straps that will securely hold kayaks to the carriers. They would definitely not fall out on the highway. Aerodynamics of the trailer are really great too as the tow vehicle basically will punch a hole in the wind as you are driving which this then follows through without creating much wind resistance. The trailer won't sway either. It's very stable actually. There isn't a specific scenario that this...
    view full answer...
  • Will EcoHitch Trailer Hitch Fit a 2016 Kia Sorento with Full Size Spare
    I spoke with my contact at EcoHtch and they said that since they only test fit the trailer hitch # 306-X7320 with the OEM spare tire (donut) they wouldn't be able to confirm if it will fit the larger tire that you have. The other trailer hitches, like the etrailer.com # E98843, have more of a width issue but since the EcoHitch has a higher crossmember I believe that the larger diameter of your spare will be an issue. If you like the hidden look of the EcoHitch and you still have your...
    view full answer...
  • Malone MicroSport Kayak Carrier Trailer for Vibe Sea Ghost 130 Kayaks
    For wider kayaks like your Vibe Sea Ghost 130 j-style kayak carriers are the way to go like with the Malone MicroSport Trailer part # MPG461G2 instead. The boats will be much easier to load and will fit much better. I attached a review video for this for you to check out as well.
    view full answer...
  • Best and Safest Way to Transport Two Kayaks with 2018 Jeep Wrangler JK
    If your goal was to use the Darby Extend-A-Truck Kayak Carrier w/ Hitch Mounted Load Extender and Single-Bar Roof Rack # DTA944-968-924 with your 2018 Jeep Wrangler you'd only really need a rear hitch installed on your vehicle. For that we have the etrailer.com hitch part # E98856 which will fit and work well. That said we are aware that the roof of Jeep Wranglers really weren't designed to carry much weight. I'd be shocked if you had the weight to carry two kayaks as our roof rack...
    view full answer...
  • Will the Draw-Tite # 24935 be Good for Towing a Small Trailer with a 2015 Scion FR-S
    The Draw-Tite # 24935 is a confirmed fit for your 2015 Scion FR-S and has a tongue weight rating of 200 lbs and a gross towing weight of 2,000 lbs so the hitch itself would be able to handle a small trailer like the Malone MicroSport # MPG461G2. To complete a towing setup for your Scion FR-S you would need wiring like the Tekonsha T-One # 118629, a ball mount like the Draw-Tite # 3593, and a hitch ball like the 1-7/8" # 19256 or 2" # 19258. You will want to reference the linked ball...
    view full answer...
  • MicroSport Trailer with Kayak Carrier Recommendation for 2-Hobie PA 14 Kayaks
    I really like the J-style kayak carriers like what the Malone Microsport Trailer part # MPG461G2 has. I attached a picture that shows this trailer carrying wider kayaks for you to check out as well. If you'd prefer they lay totally flat the SaddleUp style part # MPG461GU could work but I'd still rather recommend the J-style.
    view full answer...
  • Choosing Between A V Rack And A J Rack For A Malone Kayak Trailer
    I recommend the V-Racks or horizontal kayak racks that allow your kayak to lay flat on it's belly. They are easy to load and are lower profile when loaded so less wind resistance is generated. They can also accommodate the heavier, wider fishing kayaks if that applies now or in their future kayak purchases. The Malone XtraLight Trailer for 2 Wide Kayaks # MPG526G-V is a great example. J-style are popular but can also be more difficult to load and are less wind resistant with a higher...
    view full answer...
  • Trailer Hitch and Kayak Trailer Recommendation for 2006 Nissan 350Z
    We have one solution that would work well but it's a bit pricey so I will warn you on that. The only way you'll be able to transport two kayaks with your 2006 Nissan 350Z is going to be with a hitch like the Curt part # C11493 and a kayak trailer like the Malone MicroSport Trailer part # MPG461G2. For trailer wiring you'd then want the part # C59236 and then for a ball mount part # C45521 and a hitch ball # A-82.
    view full answer...

Do you have a question about this Trailer?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video by:
Andrew K
Expert Research:
Jameson C
Video Edited:
Jacob T
Installed by:
Colin H
Updated by:
Sarah W
Updated by:
Jessie B
Updated by:
Isabelle B
Edited by:
Daron K
Written by:
Jonathan S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.