Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed for use with your 28" long SuperHitch SuperTruss receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 32" to clear your bed-mounted camper.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Torque lift line of wiring harness extensions for use with the super truck hitch extenders. These are available in several different lengths. Just depending on how long that hitch extender that you're using is going to be. This is Torque's Lifts 36" extension that matches their 36" super stress. If you're going with the longer super truss, get the longer. If you're going with the shorter, get the shorter. Really a nice option to where you can plug it right into the back of your vehicle, bring your power down to where it's right here, readily available and accessible for you to get to. What we're going to do is take our, what looks like a trailer plug end, we're going to pass it through our bracket.
It's just flexible enough we can kind of bend that bracket so allow it to come through. Then here's what we want, that's our 7 pole connector. We're going to be bale to hook our trailer up right here. We've got the nice safety chain connections there an then also our wiring connection. Slide that in.
We're pass our screw through the face there and then just put our nuts on the back. Now, the hardware's not provided so you'll need some hardware to pass through there. You can see our bracket's kind of got the oblong holes to make it to where it'll fit a lot of different style harnesses. I'm going to put a flat washer on to give our nut a good surface to bite to when we tighten it down. Now we can go ahead and tighten those down as well. At that point, we're mounted on, got a nice secure connection point.
We can basically just plug this right into the back of our truck. You don't want this to be hanging down underneath our hitch where it might drag or something like that. That will complete today's look at the Torque Lift wiring harness extensions for the super truck hitch extender.
Average Customer Rating: 4.9 out of 5 stars (18 Customer Reviews)
Designed for use with your 28" long SuperHitch SuperTruss receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end runs back 32" to clear your bed-mounted camper.
perfect extension for a too-short trailer power cord. Works great for the whole past year.
Excellent service, excellent products, knowledgeable sales associates.....That's why I keep coming back.
Wish our government could work as smoothly and efficiently.
Long time, loyal, happy customer.
Alan Withrow (A trailer pulling, pick cooking man)
BSA Troop 118
Charlotte, NC
Would have liked to have seen it about 2 inches longer. Would recommend order the next length up from the length of your extension. Would give you a little more wiggle room and more then one way to route it.
etrailer has simply outstanding delivery and product was exactly what I ordered and expected....amazing experience!
very nice
Both products I purchased were of good quality and what i expected
Order did not go through on first try, but all went fine and the part was great.
Awesome product
I have made multiple purchases . ALWAYS excellent service and delivery.
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Clyde H.
8/29/2021
great a must have with hitch extension