EZ Connector Magnetic 14-Pin Trailer Connector with Watertight Seal and Splice Kit - Vehicle End

EZ Connector Trailer Wiring - 319-S14-05-6

Upgrade to a 14-pin connector for your vehicle with this socket. Built-in magnet creates tight connection with an EZ Connector trailer-end plug (sold separately). O-ring makes a watertight seal. Face-to-face contacts mean no bent or broken terminals.

Features:

• Vehicle-end trailer connector installs at the back of your vehicle to power your trailer's signal lights
• 14-Pin connector provides basic 7-way functions plus 7 spare functions to fit your application
  • Great for industrial and agricultural use, as well as connecting wiring from a snowplow or backup camera
• Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure
  • Plugs stay tightly connected, despite the bumps and vibrations common with towing
• Face-to-face electrical contacts - no pins or blades to bend or break
  • Eliminates concerns about electrical arcing and abraded pins
  • Contacts are easy to clean when necessary
• Ideal for marine applications
  • Silicon O-ring on lid creates a watertight seal when lid is closed to keep out moisture and debris
  • Marine-grade wiring resists water damage
• Spring-loaded, self-closing lid automatically covers connector
• Simple installation
  • Hardwires to existing wiring with included connectors
• Mounting bracket sold separately
• Made in the USA

Specs:

• Wiring harness length: 6"
• Wire gauge: 14
• Limited lifetime warranty

This vehicle-end trailer connector gives you the functionality of a 7-way, plus 7 additional circuits, but without any pins or blades to bend or break. It's designed to work with a matching 14-pin EZ Connector plug (sold separately) to create a secure, watertight connection that lasts. Strong magnets in both the plug and socket keep the connection tight and secure, even when you're driving on rough terrain. Built-in O-rings create a seal to keep out water and debris. And spring-loaded, face-to-face electrical contacts are long-lasting and easy to clean. These factors combine for a strong, durable connection that's easy to use and to maintain.

Magnetic Plugs Stay Connected

The EZ Connector system uses magnets inside the plug and socket to hold the connectors together. Simply insert the trailer-end plug (sold separately) into this vehicle-end socket and the internal magnets will snap them together, no latch needed. To disconnect, just pull the plug out by hand.

This is an improvement over typical trailer connectors, which rely on a plastic latch on the socket lid to hold the trailer plug in place. With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard plug, the connector will get pulled out of the socket, likely tearing off the lid. Without a lid, the electrical terminals are exposed to damaging moisture and debris. But if you forget to remove the EZ Connector plug when unhooking your trailer, the plug will disconnect from the receptacle as you drive off. And because there's no latch on the socket's lid to get in the way, the lid will automatically close to cover the terminals.

The magnet inside of this trailer connector is made of neodymium, an extra-strong, rare-earth alloy. This high-quality magnet ensures a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration.

Silicon O-Ring Creates Watertight Seal

The lid on this trailer connector has a silicon O-ring that creates a watertight seal over the socket when the lid is closed. The EZ Connector trailer-end plug (sold separately) has a double O-ring that will create a seal when it's inserted into the connector. This ensures that the terminals on this vehicle-end socket stay protected from moisture and debris at all times.

All of the EZ Connector systems have earned a perfect score on the SAE water submersion test. This means that the seal created on this connector, either with the lid or with the EZ Connector trailer-end plug, will stay watertight, even if the connector is completely submerged in water for extended periods of time.

No Pins or Blades to Bend or Break

This EZ Connector socket has spring-loaded, face-to-face electrical contacts instead of pins or blades. Pins and blades can bend, corrode, and even break off, which can lead to a permanently damaged connection. With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on the trailer-end plug (sold separately) that can trap debris. And if any dirt or debris does collect on the terminals of either end of an EZ Connector setup, it can be quickly and easily wiped away. No more scraping pins to get grime off. The result of all of this is a quality, effective connection every time you plug in.

S14-05-6 Easy Connector 14-Pin Trailer Connector with Self Closing Socket and Hardwire Kit - Vehicle Side

Installation Details