Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use this Curt 6-way wiring connector to attach to your trailer or pop-up camper. The adapter is constructed of molded rubber and the 12" loop has 6-way square vehicle and trailer ends.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker: Today, well be reviewing part number C58034. This is the Curt 6-pole Square Trailer Wiring Connecting Loop. It does have a vehicle end and a trailer end. The wiring connector is going to allow for a quick, simple connection of your trailer or camper to your vehicle. No cutting or splicing of wires is needed. One connector is going to plug into your vehicle and the other end is going to plug into the connector on your trailer or camper.
The distance between the two ends is when we measure 12 inches, so our wiring is 12 inches long that has protective coating to help prevent any type of damage that may occur to our wires. You can see there that its going to be a pretty simple connection, just plug and go. Thats going to complete todays review of part number C58034. This is the Curt 6-Pole Square Trailer Wiring Connecting Loop with a vehicle and trailer ends. .
Average Customer Rating: 4.9 out of 5 stars (25 Customer Reviews)
Use this Curt 6-way wiring connector to attach to your trailer or pop-up camper. The adapter is constructed of molded rubber and the 12" loop has 6-way square vehicle and trailer ends.it hooked my pickup truck up to my 2018 Arctic Fox 990. All lites and charging system functioned as designed. Happy with the product
This product will be used to connect my eight-wire Ham Antenna rotor to the inside control box. Near the bottom of the tower, I will use it as a disconnect from the control and connect to a ground rod when not in use for lightning protection at that point. I will have another connection at the inside control to disconnect when not in use for lightning protection and will connect the line end to ground. Thus, for lightning protection, the rotor will be grounded at the base of the tower and the line will be disconnected from the rotor control and reconnected to a nearby outside ground rod. I use a six-point connector for the motion control wires and a two-point connector for the hot and ground wires going to the rotor.
Bill
3/30/2019
Working fine no problems
I needed a wiring harness to match what an installer used for a rearview camera hookup on my 5th wheel. I was putting a camera on another trailer, and this was the perfect match to what they used previously.
Order it and it came early
Fast service. The one end was what I needed but the other end did not fit the camper plug. I bought the camper used and I'm not sure how the original wiring was installed? Was looking to convert from a 6 way to a four way so I could pull the camper with a Trike or car.
Made a great junction connection
Duke
10/17/2020
Still flexible and working well.
Did exactly what it was supposed to do. Was happy to find that such a harness was actually available. Saved me a lot of rewiring time.
I needed male/female 6 pin connectors for a protype and this worked perfectly!
Was easy to change the one end that was male 6 pin into a female 4 pin to fit trailer to car. Thanks.
Truly satisfied customer. Order arrived very quickly and accurately. Highly recommend ordering from etrailer.com
2 minutes to install in my 2017 Silverado. It took longer to open the box to plug it in.
Fast service. I received the part I ordered and paid a reasonable price.
Part was what I needed, delivery took a bit longer then expected
Product met needs that I couldn't find in any brick and mortar stores. Shipping and handling was expensive. Great communication by seller throughout process.
Just what I wanted, good shipping time, great product
Dan
Perfect
Purchased to make temporary adaptor for a short time use works great good product.
Product came quick and was just what was ordered.
Great product, great service., easy to find and purchase.
Great product, fast service
Great job
As expected
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Carl
7/22/2023
still functioning good.