bing tracking image
  1. Trailer Wiring
  2. Tekonsha
  3. Trailer Connectors
  4. Vehicle End Connector
  5. 4 Flat
  6. Plug and Lead
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit

ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit

Item # 119250KIT
lowest price pledge
Our Price: $230.84
Trailer Wiring
This item qualifies for Free Shipping
Shipping Weight: 1.95 lbs
Tekonsha Trailer Wiring - 119250KIT
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full trailer wiring installation instructions. Lowest price X3 trailer wiring guarantee and expert service. BMW X3, 2008 trailer wiring by Tekonsha are available from For expert service call 1-636-306-4830 to order your ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit part number 119250KIT, or order online at
  • All Info
  • Reviews (376)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Trailer Wiring - 119250KIT

  • Trailer Connectors
  • Vehicle End Connector
  • 4 Flat
  • Plug and Lead
  • Tekonsha

Install a 4-way trailer connector on your vehicle without cutting or splicing into your wiring. Zero-contact interface sensors identify the current flowing through each wire by simply clamping onto it. Circuit-protected module is made using SMT.


  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
  • Bypasses factory wiring and involves no cutting, splicing, or plugging into vehicle's wiring
    • Sensors clamp onto the wires of your factory tail light wiring harness to detect current
    • No feedback, no interference with, and no power draw from your vehicle's wiring system
    • Easily removable and transferrable between different vehicles
    • Circuit tester included to ensure proper setup
  • Includes circuit-protected module that connects directly to car battery for power
    • Power wire, fuse holder, and 15-amp fuse included for installation
  • Works with 2-wire, 3-wire, PWM, and multiplex wiring systems
  • Constructed using surface-mount technology (SMT) for consistent, reliable performance
    • Maximizes trailer light yield and intensity while producing minimal heat
    • Ensures superior operation in rough road conditions
  • Comes with dust cap for 4-way flat connector


  • Application: vehicles with 12V electrical systems
  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty

This revolutionary wiring method makes it fast, easy, and safe to add a 4-way connector to your vehicle so you can power your trailer's lights. Unlike traditional tail light wiring harnesses, which either splice into your vehicle's wiring or plug into designated ports in your factory harness, this system bypasses your vehicle's wiring entirely. Just clamp the intuitive sensors onto the individual wires of your OEM tail light harness and let the ZCI system do the rest.

Zero-Contact Interface Sensors


Each zero-contact interface (ZCI) sensor included with this harness is able to read the current that travels through the wire it is clamped onto. Upon sensing the specific modulation of that wire, a signal can be sent along the wire that connects the sensor to the included 4-way flat trailer connector. That signal is then transmitted through the connector to activate the appropriate function on your trailer lights.

Universal, Worry-Free Design

No Splicing, Cutting, or Connecting to Factory Wiring

Because the ZCI sensors can read the signals sent through your vehicle's wires just by clamping onto them, no cutting or splicing is necessary. The system completely bypasses all of your vehicle's wiring. As a result, your trailer's lights will be powered without overloading your vehicle's electrical system. And there is no chance of damaging feedback either.

When using this ZCI harness, you don't have to worry about voiding your warranty, nor do you need to be concerned about any potentially damaging errors on your part if you're not an experienced do-it-yourselfer. And if you have a vehicle that doesn't allow certain modifications - like a leased car or truck - you can install this harness and remove it later with no obvious alteration to the vehicle.

Maximum Compatibility

This wiring harness is universal. You can use it on any vehicle that operates on a 12V, negative ground system. Because installation is so simple, you can easily remove the unit and transfer it to another car or truck at any time.

In addition, the ZCI sensors are able to read the signals sent by multiplex wiring systems and systems with pulse width modulation (PWM) and low-side-switched wiring, making the harness compatible with nearly all automotive wiring systems. This unit also works with both standard incandescent tail light bulbs and LED bulbs.

Built-In Tail Light Converter

Most trailers run on a 2-wire system - wherein the brake and turn signals are carried on a single wire. Many vehicles, however, are built with separate brake and turn signals. This type of system is referred to as a 3-wire system. If your vehicle operates on a 3-wire system, it will need to be converted so that it will be compatible with the wiring system of your trailer. This is done by adding a tail light converter to your wiring setup to combine the brake and turn signal functions of your automobile so that they run on a single wire to properly activate your trailer's tail lights.

This ZCI unit has a tail light converter built in to ensure proper functioning with any vehicle that operates on a 3-wire system. If your car has a 2-wire system and therefore does not need a converter, don't worry. The method of installing the sensors will take into account the wiring configuration of your vehicle so that only the necessary sensors are used, making sure the appropriate signals are sent back to the 4-way.


This universal harness connects to your vehicle's tail light wiring harness. To connect, just follow the included instructions. There are 4 ZCI sensors included. Each sensor has a colored label on it. Depending on your application, you will need to connect all or some of these sensors to the factory wires indicated in the instructions.

To get the power necessary to operate, the harness must be connected to a 12V power source. The included installation kit provides the hot lead required to connect this module to your car battery. When all connections have been made, connect the hot lead to the black wire on the ZCI power module and run the other end of the lead up to your car battery. Connect the hot lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery. Then insert the included 15-amp fuse into the fuse holder.

Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location either within your cargo area or beneath your vehicle, near the trailer hitch. If you choose to mount the connector near your hitch, a mounting bracket (sold separately) is recommended to keep the connector secure.

It is also recommended that you use a small amount of grease on all electrical connections on the 4-pole connector to help prevent corrosion.

Surface Mount Technology

Each ZCI wiring harness is built using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.

Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? SMT components also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.

119251 Tekonsha ZCI Zero Contact Interface Universal ModuLite and Installation Wiring Kit

48705 LED Circuit Tester - 12 Volts

Installation Details 119250KIT Installation instructions

California residents: click here

Customer Reviews

ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit - 119250KIT

Average Customer Rating:  4.7 out of 5 stars   (375 Customer Reviews)

Install a 4-way trailer connector on your vehicle without cutting or splicing into your wiring. Zero-contact interface sensors identify the current flowing through each wire by simply clamping onto it. Circuit-protected module is made using SMT.


I purchased this kit for my 2018 Macan S. The battery is located at the back which makes it easy to connect to the power.
1. remove the side panels to get to the rear lights (they are snap on)
2. remove the spare wheels cover.
3. Unclips the back light connectors (left and right) and remove tape to access the wires
4. with the provided probe, check for left, right signal wires and mark them
5. with the provided probe, check for Brake and Tail light wires and mark them
6. connect the provides sensors to the corresponding wires (arrow pointing to the lightbulb).
7. Make sure to connect Ground wire (white) to the good location on the vehicle. (on the Macan it took me a while to find good connection spot due to the exceptional paint job the Porsche does, you may connected it to the battery to test it)
8. Connect the power wire to the battery, fuse should be removed.
9. run the learning mode as per interactions provided
10. I purchased a 4-pin test connector to help me with testing and troubleshot.
11. tuck in all the wires and, cover the sensors and places back to vehicle covers .
This unit works very well, it was easy to install. making sure you have a good ground spot is very important.


This product worked as expected. The more useful information to readers may be that I installed this on a 2013 Audi Q5. I tapped into the wires and power source in the passenger rear panel. Most installation information including the video here on etrailer tell you to tap the wires in the rear hatch. This is a sloppy difficult way to do it and unnecessary. Good luck.


The product works well for the most part. The only issue is that it doesn't trigger the brake lights on my Kendon motorcycle trailer.

Because you have a motorcycle trailer and not a standard trailer, you will need a converter to separate the circuits of the Tekonsha harness from a 2-way circuit to a 3-way circuit. To do that, use the Curt 2-To-3-Wire Tail Light Converter, part # C56196
Curt 2 to 3 Wire Tail Light Converter
-- Etrailer Expert Katrina B - 05/03/2022


Fairly install on 2019 VW Alltrack. Ran power lead under car zip tying to keep out of the way of cv joints and exhaust routing inside of rock shield. I like the fact that no electrical connection needs to be made to vehicle lighting system such that a fault in trailer wiring causes problems to towing vehicle electrical. Just snapped the sensors over applicable lighting wiring and it works!

Cant get the right turnsignal or brake light to work after about 6 mths after install. Not the trailer as the lights are all fine with other car towing. Ive checked that the sensor is properly installed over existing wiring. No dice.
Brian - 06/01/2022


I love my hitch, but the installation of this harness for my Audi Q5 was a huge disappointment. I think it's absurd that the wiring has to hang out of the hatch. I ended up buying something different from the installer that could store UNDER THE BUMPER where it should be. Since the box was misplaced, I was unable to return it. I'll maybe try to sell --- or just throw it away. It was an expensive mistake.


The trailer hitch and wiring assembly have worked flawlessly. After calling several local installation outfits and receiving estimates of $2,000+ I decided to install myself. I have a little mechanical experience but this was the first hitch and wiring harness for me. This is my wife's X5 so I was a little nervous about popping rivets and pulling the rear bumper cover off, but eTrailer has excellent step by step video instructions by model year. The order included replacement rivets and detailed instructions. They could not have made this any easier. I really took my time and completed the job in about 5 hours. The final install looks professional and clean. The no-splice wiring harness is amazing - worth every penny.

Tools: I was able to easily pop off the existing plastics rivets, and installed the new rivets (included from eTrailer) with pliers pretty easily - you may want to borrow a plastic rivet gun from your local hardware or auto parts store. On the X5 your have to cut a small notch out of the underside of the bumper cover. I happen to have a Dremmel which worked well. You may be able to use a razor blade. The plastic is not that thick.

Pictures are attached.

Thanks etrailer!


2012 VW GTI (autobahn edition) Installation (DSG)

I had some small issues and hiccups along the way, so in order help out since I couldn't seem to find vehicle specific help, here is what I did. I did buy the CURT 4-way flat connector tester (Item #126) first to make my life easier when testing. It helps. Buy it.

First - start by removing the cargo floor carpet and pulling down the drivers side wall carpet. I did find it necessary to take the moulding trim off the top portion of where the hatch cover locks in, along with the rear seat belt guide trim so I could run the wires to the battery cleanly. There is a few star bolts holding the trim alongside the rear seats when folded down, so just do a search if can’t find it (one cover has to be popped off)

Second - Wiring. This was a little bit of a guess, as I have 3 wires, and my meter didn’t seem to be helpful since they were so small and close together. Here’s what works (drivers side):

- “Stop” module clips over the black/red wire
- Middle brown wire isn’t used
- “Left” turn signal module clips over the green/black wire
- Passenger side right turn signal clips over the green/black wire
- I screwed the ground right into a side structure panel

Running the battery cable was the bigger time suck.
- Stated above I had the drivers side rear panel trim and carpet removed, and I continued removing the front/rear drivers floor sill trim. I ran the black wire along the current loom and tucked it under the floor carpet.
- I then ran it behind the hood latch and towards the top of the metal foot rest, keeping it behind the carpet
- This is where you get to the firewall. There is a piece of foam. Remove it. Now you’ll see a rubber grommet where the clutch pedal would go through if you have a standard. I took that out, drilled a small hole to run the wire through that I attached the wire to a metal hanger to fish up and to the right of the battery box. Fish it up, grab it, and pull it through.
- Slide the grommet back into place (your wire would have been already through it) and snap it on.
- Make your connection to the battery and follow initiation instructions.


The first three wiring harness that i got did not work with my 2020 ecosport the the company was not aware of the problem they were wonderful in helping me correct the issue with a different style harness. I will shop with them again.


The Tekonsha wiring harness was a bit difficult to install, as the clip-on connections are a somewhat bulky to fit in my Tesla Model 3's tight spaces. The good news is: they work as promised like a charm with our tiny camp trailer's lights. In truth, I have only had to use them once, but cannot imagine that any unforeseen problems would occur with them in the future.


Installed on 2018 Jeep Grand Cherokee Limited with no tow package. Install was kind of a P.I.T.A. But worth doing on your own to avoid the stealership. Not too much electrical knowhow required, as the black wire on Jeep tail lights are all ground. Running the power cable was the most difficult part, and required removing the interior rear quarter panel, which I managed to break a plastic clip. Would not recommend this on a Jeep, as there is no simple way to install this on the interior of the vehicle since the tail lights are wired 100% outside of the car. I’d say skip if you are looking into this for a Jeep, and wait for an OEM trailer harness to come out from mopar.


I used it on a 2017 Chevy bolt (think Chevy discurages people from installing a trailer hitch) since it did not come with any trailer hook up instructions. I think it gave my instaler a work out since he never did one before, but despite the cost I think it was the right way to go instead off cutting into wires etc. I dont use a trailer that much, but it has worked absolutely fine. Only problem has been that I think installer disturbed a wire hook up to a parking light (that is only needed-if lift gate is open) so he has not gotten around fixing that since he has to get into the trunk inards to do it.


Installed on a 2018 Audi Q5. Installation was not easy, partially due to working with the panels on the Audi, partially due to the module being hard to configure properly. After 20+ hours working on it, I got it to a point where it correctly recognizes 'most' signals. For whatever reason, the left turn signal does not work, regardless of how many times I adjust the connections and reset the module. It was a cheap solution that gets me 80% of the way there. I'll also note that there is little/no online reference material available, beyond the installation videos that etrailer posted; this makes troubleshooting nearly impossible.

I recommend viewing the video install that we have on a 2018 Audi Q5. Be sure to follow the steps for a 2 wire system in the manual. When one of the functions is not working you would need to start vehicle and turn all functions off: Tail and head lights, brake and turn. Initiate ZCI learn mode by placing 15 amp fuse into fuse holder. Then you would active each function for 5 seconds. The hatch does need to be closed when testing the harness.
-- Etrailer Expert Jenny N - 01/04/2022


Super easy to install on my 2013 MINI Cooper Coupe, no cutting or wire splicing needed. The MINI tailights incorporate both LEDs and regular incandescent bulbs and have a somewhat convoluted wiring harness, but I had no issues and everything worked as it should out of the box. Recommended.


works fine. Other than when the car battery is disconnected or goes flat, a procedure is required to re-activate the trailer wiring system. I realize that no workaround may exist......just part of the requirements for new computerized cars. Fine product. I'd buy again because it does what it should.


Did not work for me at all they send me second unit which also didn't work, got transferred to their tech person which also was confused why it wasn't working and told me it could not be comparable with my car model decided to return it all.

I am sorry that your kit did not work for your application. This kit is a universal kit, that should come with everything you will need in order for the harness to fit your application.
Katrina B - 09/28/2022


Great wiring harness, does NOT require and cutting what so ever. Sal FROM customer service is very helpful. I would recommend for a friend to help to make the install go faster. Over all great, dealer said I would need a special computer program for the Harness to work properly, that is incorrect. Just follow the instructions that are included and you will not regret your investment. Car 2018 Audi Q5


Installed on my 2017 Corvette Z06.
install and works great.
Suggested by one of there tech’s to not void the warranty. No wires get cut or pierced.
Thanks for a great product.

The harness, as I said , installed easily and worked perfectly. It’s still working perfectly. As you can see this was not your normal install. The tech did not judge but instead was anxious to help.
David1 H - 04/24/2021


Customer service knew exactly what I would need to get my car ready for towing.


Wiring to the battery on my model 3 would have been a pain so I just put a small battery in the back with the module.
It is really nice being able to haul a small trailer.


Work perfectly. The hard part is running a 12 volt hot wire back to the battery I had glad this product does not put interfere with the car's orginial wiring.


Works, could not get lights to work 100% correct but close enough to use the trailer. Brake lights are on when running lights, and 4way hazard lights don’t work. But turn signals work and brakes dim the trailer lights so good enough. Audi A3 etron


I installed the kit on a 2016 Audi A6. I could not find any videos for this car but did watch the video on the Audi A4 which was helpful. Audis are not easy to get information on and are sometimes difficult to work on. The A4 info was very helpful in accessing the wiring but from there it was trial and error in which wire to use for each function. The sensor is very easy to install although on the A6 it is very cramped to work on. IT TOOK ME CONSIDERABLE LONGER TO DO THE INSTALLITION THAN ESTIMATED. This was not due to the kit but to wire identification and some problems with the wiring on my trailer I hAVE NO PROBLEM WITH THE QUALITY AND OPERATION OF THE KIT. For accomplishing the job I rate it 5 stars. I first saw this kit a couple months ago and though it quite expensive (at that time $xxx +) At the time I ordered it the price was just over $xxx. The Audi is a very high tech car so I decided to pay this to avoid the possible trouble a direct wiring job could incur. The product was shipped promptly but before I received it the price had dropped to $xxx. This does not make me feel good about the value of my purchase. I like your web site and the easy of using it. Sorry I have no photos.

I am not seeing the different price of the product. If you have a screenshot of this, I would be happy to review. Our prices vary depending on manufacturer. We do have a Lowest Price Pledge stating if you find the exact same product on another website for less, will refund the difference plus 10 percent. Please call customer service for help 800-298-1624 with this.
-- Etrailer Expert Sierra K - 10/05/2021


This kit works perfectly! A reasonably straightforward installation, though not for a DYI'er who is uncomfortable ripping into the trim and lighting wiring harness of their vehicle. A reasonably accurate wiring diagram is very helpful, but not necessary because trial and error works well with Hall sensors used in this kit (i.e. no cutting and splicing wire is required).

Once installed, the trailer lighting load is easily handled by the power module without feedback to the vehicle lighting control circuit, although my setup does not interface with a trailer brake controller so I cannot judge full performance.

One hint - do not loose the heavy stock reference card that reminds one of the programming routine, While performing other electrical work on my car needing battery disconnection, I can never remember the programming sequence for the trailer lighting controller. Not to worry, though, the product support site has the info.


I rated it one star because it needs to be unplugged to turn off the tail lights!

You mentioned that the harness has to be unplugged to turn off the tail lights. I have a a question that I wanted to ask. Are the tail lights bright or dim? If the trailer has LED lights, then the lights may remain on dimly whenever trailer is connected to vehicle. You would want to disconnect the trailer when parked for extended periods. You may also want to check the ground on the vehicle and trailer side.
-- Etrailer Expert Jenny N - 09/16/2022


Combine this kit with a couple of YouTube videos (Thank you U-haul), the installation isn't difficult. Do purchase a circuit tester with an attachment that wraps around a wire and pierces the insulation. The cheap circuit tester that comes with the kit is worthless.

This product has worked flawlessly since installation.
David W - 10/27/2021

Show More Reviews

See what our Experts say about this Tekonsha Trailer Wiring

  • Troubleshooting Tekonsha ZCI Item # 119250KIT Installation On 2016 Porsche Cayenne
    I contacted the tech support of the manufacturer for some ideas and your are on the right track. Your 2016 Porsche Cayenne has dedicated wires for each function and also has wires that are multi-function. To get everything to work correctly with the Tekonsha ZCI Vehicle Wiring Harness, Item # 119250KIT, you will need to find dedicated wires for each function (tail, brake, turn, etc.). Unfortunately, there are no "shortcuts" and you will have to continue the "trial and error" testing...
    view full answer...
  • ZCI Circuit Protected Vehicle Wiring Harness 119250KIT Installation in 2007 BMW X5
    The pricing and installation of OEM wiring products is outside our experience but as with hitches, wiring kits from a dealership are typically much more costly than aftermarket products. Depending on how those OEM parts install there could be a need for additional modifications on the vehicle for such dealer-installed items. These modifications are NOT needed with the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT because it does not directly connect to any vehicle wiring, only...
    view full answer...
  • Recommended Zero Contact Interface Wiring Harness for 2015 Mercedes-Benz 250 Blue Tech
    For your 2015 Mercedes-Benz GLK 250, the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is what you are seeking. This wiring harness utilizes a technology called zero contact interface using sensors to capture the signal sent through the vehicle wiring without penetrating the wiring insulation. It draws power directly from your vehicle battery and sends the captured signal to your trailer wiring. I've attached a...
    view full answer...
  • Does ZCI Trailer Wiring Kit # 119250KIT Fit 2014 Mercedes E350 4Matic Wagon
    The trailer wiring kit part # 119250KIT is designed to accomodate all vehicle wiring styles so yes it is a fit for your 2014 Mercedes E-350 wagon. The key is determining which style of taillights your vehicle has and using the chart in the instructions that shows how to wire in the kit. I attached a picture that shows this.
    view full answer...
    Image 1 for
  • Does ZCI Trailer Wiring Harness Fit 2008 Range Rover Supercharged
    Yes, the great thing about the ZCI trailer wiring harness part # 119250KIT that you mentioned is that it can basically fit all vehicles including your 2008 Range Rover.
    view full answer...
  • Possible Trailer Wiring Solution for European 2018 Jeep Grand Cherokee
    Since we only carry custom fit trailer wiring harnesses for US spec vehicles we aren't going to have a custom install kit that will work on your European 2018 Jeep Grand Cherokee. Only solution we'd have would be a universal style kit which for that I recommend the ZCI kit part # 119250KIT as it uses sensors to tap into the vehicle wiring instead of requiring hardwiring. This makes for an easier install that is less invasive.
    view full answer...
  • Can Power Wire for ZCI Wiring Kit be Connected to Cigarette Lighter-Style Plug in Rear of Vehicle
    Although it *could* work, I have contacted Tekonsha about this very situation in the past and their response is to only run the black power wire on your ZCI # 119250KIT to the battery. Reason being that the black power wire is there so that your trailer wiring is drawing power directly from the battery so that it doesn't affect the OEM wiring on your tow vehicle. A lot of 12V cigarette lighter-type outlets are meant for smaller accessories so if enough power is being pulled through it...
    view full answer...
  • Is There a Trailer Wiring Harness Compatible with the 2018 VW Tiguan 4Motion?
    There is not a custom fit at this time for your 2018 VW Tiguan with 4Motion. The custom fit harnesses from our manufacturers exclude the 4Motion. Because there is not a custom fit, your best option is to use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This kit will not splice into your wires but instead will use the zero contact interface sensors to capture the needed signals. The module will draw power directly...
    view full answer...
  • Trailer Wiring Recommendation for 2002 BMW X5
    Since there are no custom install trailer wiring kits for your 2002 BMW X5 you will have to go with a universal style wiring harness. The best option for your 2002 BMW X5 would be the ZCI Harness part # 119250KIT. The reason I like this one the most is because instead of using splices to connect to the vehicle wiring this uses sensors that just slip over the wiring of the vehicle. I attached an install video for this for you to check out as well.
    view full answer...
  • Trailer Wiring Recommendation for 2014 Infiniti QX80
    The best trailer wiring option we have for your 2014 Infiniti QX80 is the ZCI Tekonsha kit part # 119250KIT which is a universal style wiring harness but instead of requiring you to splice into the wires it uses sensors that clamp around the wires.
    view full answer...
  • Trailer Wiring Harness Recommendation for 2016 Audi Q5
    We have a trailer wiring harness for your 2016 Audi Q5 that does not require hardwiring to install. For that you'd want the ZCI kit part # 119250KIT. This kit uses sensors that attach to the wires instead of quick-splices so you have a very non-invasive wiring kit install. I attached an install video for this kit on a 2018 Audi Q5 which will be very similar to your 2016 Q5.
    view full answer...
  • Trailer Wiring Recommendation for 2013 BMW X1
    For a 2013 BMW X1 we do have a trailer wiring harness that we've had the chance to install and it worked well. You'd want the ZCI 4-Way kit part # 119250KIT which is a universal kit but uses sensors instead of splices which makes for a way less invasive install. Check out the install video I attached to this page to see exactly how it installs on a 2013 X1. This kit covers the brake lights as well as the turn signals and running lights.
    view full answer...
  • Does ZCI Trailer Wiring Harness # 119250KIT Have to Run to Vehicle Battery
    I really wish I could recommend taking the shortcut you mentioned when installing the ZCI trailer wiring kit part # 119250KIT but if you don't run it direclty off the battery you end up defeating the purpose of the circuit protection that this feature offers. The way it works now the power comes straight from the battery which means that in the event of a short it wouldn't damage any of the vehicle's wiring. If you ran it off of another circuit you'd void the warranty of the system and...
    view full answer...
  • Trailer Wiring Harness Recommendation for 2011 BMW 5 Series plus Install Video
    We actually had the chance to install the ZCI Trailer Wiring Harness part # 119250KIT on a similar 2010 BMW 5 Series and video taped the process. I attached a link to that for you to check out on this page. This also does come with a set of printed instructions but they are pretty generic since this kit fits nearly all vehicles.
    view full answer...
  • Trailer Wiring Recommendation for 2017 BMW X5
    For your 2017 BMW X5 we have trailer wiring harnesses that will fit and work well, but they are universal style harnesses since our manufacturers don't have a custom made option at this time. So the best option for that is the ZCI harness part # 119250KIT which uses sensors instead of splices to tap into your vehicle wiring. I attached an install video of this kit on a similar 2015 X5 to show you the process as well. This fits other vehicles as well.
    view full answer...
  • Troubleshooting LED Light on right Side of Trailer Stays on
    It could be that there is some residual voltage present at the 4-Way on your trailer which is sending enough power to activate your LED light if you have a powered module like part # 119250KIT, but it could also be an incorrect connection or an insufficient ground. I would start off by checking your grounds making sure they are secure and connected to a clean, bare-metal surface. If they look good check the wiring on your trailer for any places where the wiring is damaged or bent and replace...
    view full answer...
  • Does Trailer Wiring for 2017 Mercedes GLE 350 use 2 or 3 Wire Wiring
    Your 2017 Mercedes Benz GLE has separate turn signals from the brake lights so you'd use the 3 wire setup when installing the wiring kit part # 119250KIT.
    view full answer...
  • Does a 2018 Chrysler Pacifica Hybrid Come with a Trailer Wiring Harness
    I do not believe your 2018 Chrysler Pacifica Hybrid would have came with a factory 4-way trailer connector but I could be wrong. If present it would be attached to the trailer hitch receiver under the bumper. If you will be towing a trailer then you will need a trailer wiring harness. The 2018 Chrysler Pacifica Hybrid is available in Touring Plus, Touring L, and Limited trim levels so I am a bit confused on what you have. I have attached the available trailer wiring harness options for...
    view full answer...
  • Troubleshooting Trailer Brake Lights Staying On After Installing Tekonsha ZCI Wiring Harness
    The fact that the brake lights on your trailer are staying on all the time indicates a possible short somewhere in the vehicle or trailer wiring. Although it's pretty unlikely with the connector being new, I recommend first checking the connector at the rear of the vehicle for any dirt or debris that might be causing a short. If the connector looks fine, I recommend moving to the vehicle wiring harness. The Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT is particularly...
    view full answer...
  • Recommended Wiring Harness for Most Vehicles Without a Custom Fit Wiring Harness Available
    There is not a custom fit confirmed for your 2018 Toyota Highlander XLE available yet from any of our manufacturers. You may want to consider using the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT which is a fit for many vehicles because it senses the current in your wiring without actually splicing into them. It uses zero contact interface sensors and draws power for the converter directly from the battery of your vehicle....
    view full answer...
  • Recommended Trailer Wiring Harness for 2009 Porsche Cayenne
    For your 2009 Porsche Cayenne without a factory trailer connector, I recommend the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. This is a universal harness that will allow you to install a 4-Way trailer connector on your Porsche without having to cut or splice into its wiring. The zero-contact interface sensors actually identify the current flowing through each wire by simply clamping onto it. Once installed, this will give you a 4-Way to connect to your trailer and...
    view full answer...
  • Which Wiring Configuration to Use for ZCI 4-Pole Wiring Harness 119250KIT in 2015 BMW 328ix
    The ZCI Zero-Contact Interface 4-Pole Wiring Harness Kit # 119250KIT is a universal-fit wiring harness that can work on almost any vehicle without need to cut into the vehicle wiring. This enables it to be moved from one vehicle to another as needed and makes it the ideal choice for a leased vehicle. The written instructions detail the specific installation checks and steps required to identify the vehicle wires to be used for clamp-on installation of this kit's electro-magnetic sensors....
    view full answer...
  • Can the ZCI Kit # 119250KIT be Run to the Cigarette Lighter for Power on a 2018 Volkswagen Tiguan
    The ZCI Kit # 119250KIT that you referenced will need to be run to the battery on your 2018 Volkswagen Tiguan and not the cigatrette lighter. The first reason being that the cigarrette lighter is meant to only be used to power accessories. The second reson being that the converter box on this kit is used to completely bypass the wiring on your vehicle so that it doesn't get damaged. If you were to connect the power to something other than the battery then you would be completely ignoring...
    view full answer...
  • Is Tekonsha Trailer Wiring # 119250 Confirmed fit For 2017 Nissan Armada
    While we don't have specific fit info on installing trailer wiring in a 2017 Nisssan Armada the # 119250KIT is designed to be able to fit all taillight configurations. Since Teksonsha hasn't test fit this on your vehicle I can't tell you if you have the BTT configuration. I attached a chart though that explains all of the different ways the kit gets wired. BTT means all of the taillight functions are carried on one circuit. If you test that wire and find all circuits on it then that would...
    view full answer...
    Image 1 for

< Previous
123. . .45

Do you have a question about this Trailer Wiring?

  • Why

    At we guarantee:
  • Highest quality trailer wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video by:
Zack K
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Thomas T
Video by:
Thomas T
Employee Schuyler H
Video by:
Schuyler H
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Amanda M
Written by:
Amanda M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.