Radial tire has 8-ply rating and 2,150-lb max load at 65 psi. 15" x 6" Steel wheel has 5 on 4-1/2 bolt pattern. Nitrogen fill maintains tire pressure. 1-Year No Excuses Guarantee on tire. Complimentary roadside assistance included.
Features:
Specs:
This tire-and-wheel assembly comes with complimentary roadside assistance for 2 years. If your RV or trailer has a flat tire, call the help line and a technician will come change the flat for you. You can call 24 hours a day, 7 days a week, and 365 days a year from anywhere in the United States, Canada, or Puerto Rico.
This tire has a 1-year No Excuses Guarantee. If within the first 12 months the tire is damaged in any way that's not covered by warranty, it will be replaced at no charge. You will also be compensated a flat labor rate for the cost of mounting the replacement tire.
The NitroFill inflation process filters out oxygen to ensure that this tire-and-wheel assembly is filled with 95 to 99.9 percent pure nitrogen. Nitrogen-inflated tires maintain pressure better than tires inflated with standard air. This makes them ideal for RVs and trailers that are driven infrequently or sit in storage for long periods of time. Other benefits of consistent tire pressure are better fuel economy, improved braking and handling, decreased chance of tire failure, and longer tire life.
A tire inflated with standard air, which contains oxygen, is prone to fluctuations in pressure due to loss of air over time and ambient temperature changes. Nitrogen-inflated tires don't experience these fluctuations for a couple reasons. First, nitrogen molecules are larger than oxygen molecules, so they are less likely to permeate a rubber tire. Second, nitrogen is a dry gas, so it won't allow condensation to build inside the tire. A tire inflated with standard air may have moisture in it, which means it is more likely to be affected by ambient temperature.
In addition, the moisture that can collect in a tire inflated with standard air will contribute to corrosion of the wheel and deterioration of the rubber tire from the inside out. A nitrogen-inflated tire-and-wheel assembly is less likely to experience this type of decay. Less moisture in the tire also means reduced running temperatures.
If necessary, you can top off the tire with standard compressed air. But to maintain the benefits of nitrogen, the tire must be refilled with nitrogen.
The stud holes on this steel wheel are beveled to ensure that the wheel stays tight against your trailer hub. This also eliminates the need to constantly retorque the lug nuts.
This radial ply tire from Westlake is constructed with double steel belts and double polyester cords for increased durability. A protective layer of nylon is wrapped around the steel belts to help prevent tread separation.
The standard tread on this tire has solid, continuous ribs, and there are very few sipes (or thin grooves) cut into the rubber. This tire is designed for use on trailers, so it doesn't require the level of traction that would be needed on a vehicle that is braking or steering.
Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip. This construction prevents the cords from rubbing against one another when the tire flexes, unlike the cords on a bias ply tire. As a result, radial tires have less rolling resistance and heat buildup, which leads to a longer tread life and improved steering at higher speeds.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Radial tire has 8-ply rating and 2,150-lb max load at 65 psi. 15" x 6" Steel wheel has 5 on 4-1/2 bolt pattern. Nitrogen fill maintains tire pressure. 1-Year No Excuses Guarantee on tire. Complimentary roadside assistance included.Excellent Service! Tires and wheels look great! The tires came packaged in cardboard boxes to keep them clean and damage free. The wheel powder coating looks great also. I purchased the chrome centercaps (item #319 EZ). These fit perfect. 785036
You folks ROCK! Couldn't ask for better service or faster shipping. Thank you so much. 775059
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.