This 14" x 6" steel trailer wheel has a 5 on 4-1/2 bolt pattern and a 3.27" pilot diameter. Beveled stud holes keep wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.
Features:
Specs:
This wheel has a durable acrylic enamel finish on the front. The finish is applied after the wheel goes through an environmentally safe zinc phosphate pre-treatment and is coated with an e-coat primer layer. Compared to powder coat finishes, this finish resists getting chipped from flying road debris or scraped from hitting a curb for a longer period of time. These acrylic enamel wheels performed for more than 1,000 hours in salt spray tests.
The stud holes on this steel wheel are beveled to ensure that the wheel stays tight against your trailer hub. This also eliminates the need to constantly retorque the lug nuts.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Taskmaster 14 inch by 6 inch Vesper White Modular Steel Trailer Wheel with a 5 on 4 1/2 inch bolt pattern. Now, this is a heavy-duty steel wheel, has the modular design with a nice white finish to it. When we say modular design, that's the one that has the round holes all the way around the wheel. Now, this uses a white acrylic enamel finish to help resist chipping and other damage better than your standard powder coat finishes. The finish is applied after a zinc phosphate pretreatment, and it covers with an E-coat primer layer.
Does give you excellent corrosion resistance with a salt spray rating of more than 1,000 hours. Now, the lug nut holes on this wheel, they are beveled, help keep your wheel securely in place on your trailer hub, eliminates the need for constant re-tightening of your lug nuts. If you noticed also, the valve stem is installed, it's included. Now, this does not come with a center cap, if you do want a center cap, we do sell those separately on our website, they're usually listed on the product page as related product, but you do wanna make sure you get one that'll have a diameter that'll fit this pilot hole here, and the diameter on that is 3.27 inches, 'cause your center cap will go through the back of here and then stick out and install just like that, so you do wanna make sure to get a center cap that will have a diameter of 3.27 inches. Now, this wheel does meet the SAE J1204 standards.
Few measurements on this, we're gonna measure the diameter, which is 14 inches, and that's always measured inside to inside. So if we take our tape measure, if we go across, you can see there's your 14 inch diameter. The width will be the same way, it's measured inside to inside or bead seat to bead seat, so again, if we put our tape measures, six inches wide. Now, the bolt pattern on this wheel is a 5 on 4 1/2 inch bolt pattern, and if you wanna measure the bolt pattern on this wheel that's an odd number of lugs, what you'll need to do is pick any hole, let's say this hole, and then you'll measure across to either one of these holes. But when you measure it, it's from the center of the starting hole to the furthest edge of the hole that you measure to, so when you measure this, it'll measure 4 1/2 inches, so that means this will be a 5 lug, 4 1/2 inch bolt pattern.
Does use a wheel lug size of a 1/2 inch by 20, and the weight capacity on this wheel is 2,200 pounds. But that should do it for the review on this Taskmaster 14 inch by 6 inch Vesper White Modular Steel Trailer Wheel with the 5 on 4 1/2 inch bolt pattern..
Average Customer Rating: 4.8 out of 5 stars (783 Customer Reviews)
This 14" x 6" steel trailer wheel has a 5 on 4-1/2 bolt pattern and a 3.27" pilot diameter. Beveled stud holes keep wheel secure when mounted on your axle. Acrylic enamel finish resists damage better than powder coat finishes.Nice rims, paint job was poor. Needed to paint again.
Nice quality wheels, good finish. Just what I needed. Paired these with the chrome center caps.
Great price on right product (rims), arrived quickly and worked perfect for my utility trailer.
Great quality wheel but they forgot to tighten the valve stem so it leaked , got to mount it twice!
I purchased this wheel a year ago. It's been on my tandem axle dually trailer since I received it. It has performed as it should have. I only use the trailer occasionally to haul 12 ton loads with no problems. This was a hard to find wheel because of the unusual offset and back spacing. This is a quality wheel with no issues. The info on the etrailer site allowed me to positively identify the correct wheel to match up with the other 7 on the trailer. If you need this wheel, etrailer is the ONLY place you will find this high QUALITY wheel at a reasonable price!
It’s been a while since I got these wheels, they have been pretty good. At first glance when I got them, I was impressed by the trailer wheels quality and look. They look even better whit tires mounted on them. I will definitely recommend getting them when you need to replace old ones.
This trailer wheel was a perfect fit. It also appears to be very well built. I bought this wheel for a spare tire and it hasn’t been on the trailer yet. Thanks etrailer for your great service and products.
Thanks to lauren , she figured out by the rim diminsions the proper rim for my motor home. She took her time to gather info from me that way the product was the right one . Thanks again lauren and have a blessed week
I had a hard to find wheel on an old trailer that I ordered and paid for shipping, 5 to 7 days, I got it in two days and it fit perfectly, everything went perfectly, I would highly recommend this company to my friends and family!!
I have a 14k Gvw trailer loaded to 13k. Running load range G tires. Wheel cracks at the welds. Needs to be welded the entire circumference of the wheel.
Like most other reviewers, we were hunting a hard to find wheel with a lug pattern that the big box stores don’t stock. We found this website and it had lots of info about how to measure the bolt pattern. I had no doubt that what we bought was what we needed because of the abundance of good, easy to follow information. It was promptly shipped and sure enough, worked like a charm. We highly recommend!
The Vesper Steel Modular Trailer Wheel w/Offset-15"x 5 Rim-5 on 5-1/2-Silver is exactly what I wanted, looks perfect on our trailer.
Buyer beware. As I was advised by customer service, I should have done more research before purchasing, no price match. Before I even mounted the tire on the wheel, I found the same exact wheel on Tire Rack for 2/3 the price. A few dollars more, no problem, but $XXX from etrailer and only $XXX from Tire King
Fast as ####! Real happy wasn't 30 minutes after I got home I tires mounted and no more worries about not having a spare.
Well made and a perfect upgrade for my weekend warrior that was previously equipped with 15" wheels .
Upgrading to 16" wheels made the tire selection much better.
Very pleased with product and service.
Wheels arrived as promised and were Recieved in excellent condition. Price and quality were up to expectation and we are delighted with the quality, service and follow up
Thank You
Ron
This product has been great! Way stronger than the original rims on our dump trailer which we use to haul gravel, topsoil and our loader. Highly recommend using these wheels.
Overall, disappointed. Was priced right and shipped fast. But the paint is all chipped on the front edge of the rim and the back side isn't even painted. This is going to be a spare,but I don't need it to rust on day 2. On a positive it did come with a steel stem already installed.
Was looking for a high weight rated steel wheel to go with the Transeagle H rated 16 ply 235/80R16 tire. This is the wheel that has the weight rating that will be able to carry the heavy loads. Well made, quality wheel and finish, fast shipping.
Bought an older trailer which had a hard to find wheels on it. They had the 5 lug 5 x 5-1/2 lug pattern. Kelley helped me find it and it arrived and fit perfectly.
I've had 3 trailer rims start leaking at the weld in the past 2 months. etrailer had the replacement rim in stock and to my doorstep in 2 days with each order, keeping me and my business rolling.
I was able to install the wheels and tires immediately upon delivery. They fit perfectly.
Products were delivered ahead of time and very easy and enjoyable shopping on the website. Excellent business, and would recommend to everyone!
Nice quality wheels. Ordered 8 of them for a flatbed trailer. Worked well on a 1,200 mile trip hauling 13,000 lbs of equipment directly after replacing the old rims with no issues. Thank you for providing a quality product at a great price with good customer service!
Do you have a question about this Trailer Tires and Wheel?
Condition: Surface Scratches
Notes: Item has minor cosmetic paint chips along the edge. Otherwise new and unused.
Condition: Surface Scratches
Notes: Item has minor cosmetic paint chips along the edge. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.