This 15" x 6" trailer wheel has a 6 on 5-1/2 bolt pattern and a 3.75" pilot hole diameter. The matte-black, rustproof aluminum wheel features a mesh design with a machined face.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Sendel 15 inch by 6 inch Series T17 matte black aluminum trailer wheel with the 6-on-5-1/2 inch bolt pattern. Now, this is an aluminum wheel. It's very durable, lightweight, and rust-proof. And we mentioned this is the Sendel Series T17 and that's a mesh style design wheel that has a nice matte black finish. Now, the front and even the back of the wheel is all clear coated.
And this wheel is a high-quality wheel, meets the DOT Department of Transportation specifications and the SAE J1204 standards. Now if you notice, this wheel does not come with a center cap. If you do want a center cap, we do sell those separately. You do wanna make sure when you order it, that you order one that'll have the correct diameter to fit into this hole. The diameter on this pilot hole is 3.75 inches, so you wanna make sure to get a cap with that same diameter 'cause it'll install through this hole.
A few measurements I wanna give you on this wheel is the diameter and the diameter of wheel is always measured inside the inside. So if we take our tape measure, and you can see if we go all the way across, there's your 15 inch diameter. The width will be the same way, you're measuring inside to inside or bead seat to bead seat, so you'll see there's your six inch width. And the bolt pattern on this wheel is a 6-on-5-1/2 inch bolt pattern. And if you wanna measure that bolt pattern on a wheel with an even number of lugs, like in this case six, it's pretty simple because if you notice, the lug holes are directly across from each other.
So just pick any hole, measure from the center of that hole directly across to the center of the hole right across from it. So on this wheel, it'll measure 5-1/2 inches. So this is gonna be a six-lug 5-1/2 inch bolt pattern. This does use a wheel lug size of 1/2 inch by 20, and the weight capacity on this wheel is 3,200 pounds. But that should do it for the review on the Sendel 15 inch by 6 inch Series T17 matte black aluminum trailer wheel with the 6-on-5-1/2 inch bolt pattern.
.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.