Loadstar ST205/75D15 Bias Tire w/ 15" Series 04 Star Mag Aluminum Wheel - 5 on 4-1/2 - LR C

Kenda Trailer Tires and Wheels - AM3S649

Bias tire has a ply rating of 6 and a 1,820-lb maximum load at 50 psi. The 15" x 6" aluminum wheel has a 5 on 4-1/2 bolt pattern and a unique star spoke pattern. Improved clamp force technology ensures the wheel stays in place.

Features:

• Tire-and-wheel assembly is ideal for boat trailers, stock trailers, utility trailers, and campers
• Aluminum wheel is durable, lightweight, and rustproof
  • Hi-Spec Series 04 star spoke pattern is unique and attractive
  • Front and back of wheel are clear coated
• Improved clamp force (ICF) technology helps to keep wheel securely in place
  • Bulletproof joint created between wheel and hub when properly installed
  • Eliminate the need for constant retightening of lug nuts
• Loadstar bias ply tire
  • Flatter tread provides improved stability for excellent handling
  • Advanced rubber compound offers longer tread wear as well as low rolling resistance for a smooth ride
• Special trailer tire design
  • Couples the strength of a bias tire with the durability and stability of a radial tire
  • Created specifically for trailers and not intended for use on other vehicles
• Assembly meets DOT specifications

Specs:

• Rim dimensions: 15" diameter x 6" wide
• Bolt pattern: 5 on 4-1/2"
• Wheel bolt size: 1/2"-20
• Wheel capacity: 2,150 lbs
• Pilot diameter: 3.19"
• Offset: 0
• Tire size: ST205/75D15
  • Section width: 7.7"
  • Outer diameter: 27.4"
• Tire capacity:
  • Load range: C
  • Ply rating: 6
  • Maximum load: 1,820 lbs at 50 psi
• Warranty:
  • 5-Year on tire
  • Lifetime against structural defects on wheel

1-Year Worry-Free Guarantee

This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge.

Bias Tires vs. Radial Tires

Bias ply tires are designed for off-road or agricultural applications. They are built with thick, durable nylon cords that are positioned at a 30- to 45-degree angle to the direction of travel. The layers alternate in a crisscross pattern, making the sidewalls stiffer so that the entire tire is able to flex easily. As a result, the tire provides a smooth ride and improved handling when trailering on uneven surfaces.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

3S649 Loadstar ST205/75D15 Bias Tire with Aluminum HWT Hi-Spec Series 04 Star Spoke Rim - Load Range C