Radial tire has a 6-ply rating and a 1,820-lb max load at 50 psi. 15" x 5" Steel wheel has a 5 on 4-1/2 bolt pattern. 1-Year No Excuses Guarantee on tire. Complimentary roadside assistance included.
Features:
Specs:
This tire-and-wheel assembly comes with complimentary roadside assistance for 2 years. If your RV or trailer has a flat tire, call the help line and a technician will come change the flat for you. You can call 24 hours a day, 7 days a week, and 365 days a year from anywhere in the United States, Canada, or Puerto Rico.
This tire has a 1-year No Excuses Guarantee. If within the first 12 months the tire is damaged in any way that's not covered by warranty, it will be replaced at no charge. You will also be compensated a flat labor rate for the cost of mounting the replacement tire.
This aluminum wheel comes with steel inserts in the lug nut wells. The inserts are pressed into the aluminum, and they help prevent the holes from wearing down over time. This ensures that the wheel stays secured to your trailer hub and that you won't have to constantly retorque the lug nuts.
Unlike standard trailer tire tread, which has solid, continuous ribs, the tread on these Castle Rock radials has ribs with breaks. These breaks allow water to run off to the sides. The Castle Rock tread also has sipes. Siping is a process in which thin grooves (or sipes) are cut into the rubber of the tire. The grooves channel water away from the tread so that the tire makes better contact with the road. Both of these features greatly improve traction during wet, snowy, or icy conditions.
Castle Rock radials are constructed with double steel belts and double nylon cords. A protective layer of nylon is wrapped around the steel belts to help prevent tread separation.
Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip. This construction prevents the cords from rubbing against one another when the tire flexes, unlike the cords on a bias ply tire. As a result, radial tires have less rolling resistance and heat buildup, which leads to a longer tread life and improved steering at higher speeds.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.