1. Trailer Spindles
  2. Redline
  3. For 3000 lb Axle
  4. Agricultural Spindle
  5. 1.62 Inch Diameter
  6. Round
Agricultural Spindle, 1.62 x 5-3/8" Stub - 1500 lbs Capacity

Agricultural Spindle, 1.62 x 5-3/8" Stub - 1500 lbs Capacity

Item # AS1500E
lowest price pledge
Our Price: $26.66
You Save: 18%
Trailer Spindles
Orders above $99 qualify for Free Shipping
Shipping Weight: 5 lbs
In Stock, Ships Today
Agricultural Spindle, 1.62 x 5-3/8" Stub - 1500 lbs Capacity 1.62 Inch Diameter AS1500E
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images


Lowest Prices for the best trailer spindles from Redline. Agricultural Spindle, 1.62 x 5-3/8" Stub - 1500 lbs Capacity part number AS1500E can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (7)
  • Q & A (12)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Trailer Spindles - AS1500E

  • For 3000 lb Axle
  • Agricultural Spindle
  • 1.62 Inch Diameter
  • Round
  • Redline
  • 5-3/8 Inch Long

Agricultural trailer spindle comes complete with nut and washer.

  • Spindle length: 10"
  • Works with the following bearings:
    • LM67048 Inner bearing
    • LM11949 Outer bearing

Part No. Capacity A B C D E F
AS1500E 1500 lb 1.62 1.50 1.25 .75 3/4" - 16 UNF 5-3/8

Video of Agricultural Spindle, 1.62 x 5-3/8" Stub - 1500 lbs Capacity

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Redline Trailer Spindles - Agricultural Spindle - AS1500E Review

Today were going to review part number AS1500E. This is the Redline Agricultural trailer spindle. This is a round spindle. This spindle will come complete with the spindle washer, a castle nut and the cotter pin. This agricultural spindle will have a 1,500-pound weight capacity and there are a few dimensions that will need to be taken if youre going to replace the agricultural spindle on your trailer. You want those dimensions to match up to get you the correct part and most of these will be in 1/100s of an inch so I am going to use this digital caliper to record those measurements.

First, I want to give you some lengths. The length of this stub part which is here to here is going to be 5 3/8 inches. The total overall length on this is going to 10 inches. Now well measure some diameters for you. The diameter of this stub back here is going to be 1.62.

The measurement of the grease sealed dimension which is right here is going to be 1.50. Then the measurement of the inner bearing surface which will be right here is going to be 1.25. The measurement of the outer bearing surface which is right here is going to be 0.75. Then the diameter of the threaded portion of the spindle right here is also 0.75 or of an inch. The threads that is used on the of this agricultural spindle would measure of an inch x 16 threads per inch and it is a UNF or a fine thread.

That should do it for our review on part A1500E.

Customer Reviews

Agricultural Spindle, 1.62 x 5-3/8" Stub - 1500 lbs Capacity - AS1500E

Average Customer Rating:  5.0 out of 5 stars   (7 Customer Reviews)

- AS1500E

Just as described with fast shipping. T hanks! 312652

- AS1500E

worked great with the hub assembly. Would buy again. 305434

- AS1500E

Great company to deal with 261517

- AS1500E

The items I received were very nice and well packaged and quick shipping unfortunately I bought the wrong size and they took care of me. this is a great company to do with thank y'all for helping me out 252659

- AS1500E


- AS1500E

it worked 116198

- AS1500E

very good quality, shipped very fast 57747


Ask the Experts about this Redline Trailer Spindles

  • Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is Straight
    The only hub we have that is currently available for a 3/4 inch spindle is Item # AH15450ECOMP. This is an agricultural hub that fits 3,000 lbs axles for 4 on 5 inch bolt pattern. It takes an inner bearing, Item # LM67048, and outer bearing, Item # LM11949. It is meant to be used for low speed (less than 20 mph) agricultural applications. It is designed for a spindle like Item # AS1500E. If you can find the actual bearing number on your old bearings and seal or can send me a bearing...
    view full answer...
    It sounds like you've got an unusual hub. I was able to find a Spindle Grease Seal Set for # LM67048 Inner Bearing and 2.33 Bearing Buddy, part # BB60008. This grease seal has an inner diameter of 1.875 and an outer diameter of 2.33, which sounds like the size you need. I did some measurements for you and found that the measurement from the inside of the inner race to the inside of the outer race is 2-1/4". The measurement from the outside of the inner race to the outside of the outer...
    view full answer...
  • Replacement Hub for a 3/4 Inch Diameter Straight Spindle
    The only hub we have that is associated with a 3/4 inch spindle is # AH15450ECOMP. This is an agricultural hub that takes inner bearing # LM67048 and outer bearing # LM11949. But the spindle it fits on is not straight, it is tapered, # AS1500E. If this is a kit trailer then in order to replace the hubs, wheels, and tires you are going to have to replace the axle. I have included a link to the right to the straight axles and the axle-less systems that we have. The axle-less systems may...
    view full answer...
  • Replacement Hub Assembly for Tapered 3/4 spindle
    We do have one hub that will work with 3/4 inch spindle # AS1500E, but this particular spindle measures larger than 1-1/16 inches towards the axle and does not work with the same bearings. The hub, # AH15450ECOMP, also has a 4 on 5 bolt pattern. The grease seal is also going to depend on the measurements of your spindle and we do not have any matching the dimensions you gave. We do have the correct replacement bearings # LM11949 with matching race # LM11910 and # L44649 with matching...
    view full answer...
  • What Spindle is Needed for LM67048 Inner and LM11949 Outer Bearings
    The spindle we show for the # LM67048 inner and # LM11949 outer bearing is the # AS1500E Agricultural Spindle. We do not list the distance between the inner and outer bearing so I cannot verify that dimension for you. You can order the spindle, item # AS1500E, using the link below if you like.
    view full answer...
  • Availability of Spindle with Spindle Diameters of .75 and 1.25 inches
    The agricultural spindle part # AS1500E is a tapered spindle that has dimensions that go from .75 to 1.25 inch where the bearings would ride. This has a 1,500 lb capacity.
    view full answer...
  • Spindle Identification on an Old Horse Trailer
    Based on the diameter of the spindle where the seal rides and the outer bearing dimension being .75 it sounds like you have the agricultural spindle # AS1500E. Check out the chart in the product description that shows all of the dimensions of the spindle to verify this. You will need to use a dial caliper or micrometer to get an exact measurement. Only problem is that none of the hubs we offer that will fit this spindle are hub and drums nor have a 5 on 4-1/2 inch bolt pattern. If...
    view full answer...
  • What is the Overall Length of the Redline Agricultural Spindle # AS1500E
    I pulled an Agricultural Spindle # AS1500E that you referenced and measured the length of it and found it to be right at 10 inches long. I also grabbed bearings # LM67048 and # LM11949, slid them on the axle and measured the distance between the inner bearing and outer bearing from center to center and found that it is 2.33 inches. Check out the video I put together for you that shows this measurement.
    view full answer...
  • Hub Recommendation to fit Agricultural Spindle # AS1500E
    Based on the spindle dimensions you listed it sounds like you have an agricultural spindle # AS1500E and the only hub we carry designed to fit that would be the # AH15450ECOMP. There is no way to get a 2-48 hub to fit your spindle.
    view full answer...
  • Which Outer Bearing Mates with Inner Bearing LM67048 on a 4-Bolt Hub
    We have a 4-bolt hub that uses LM67048 as the inner bearing and an LM11949 bearing as the outer. That is the only hub/bearing configuration we have for an LM67048 inner bearing. It is typically a hub found in agricultural trailer applications. The hub is part # AH15450ECOMP if you want to take a look at it and see if it looks like your hub. I pulled one of the LM11949 bearings from our warehouse to measure. When measuring bearings, you really need to use a dial caliper. A tape measure...
    view full answer...
  • What Is The Difference Between an Agricultural Hub and Standard Hub
    The difference between an agricultural hub like part # AH15450ECOMP and a standard hub is agricultural hubs are designed to fit agricultural applications and certain spindles. Usually the hubs are used to build wagons or carts and low speed applications like what it sounds like you may be trying to do. Standard hubs are usually found on your typical trailer application. Agricultural hubs still use bearings to fit on a spindle so it would not work to fit on a bar. For example the Agricultural...
    view full answer...
  • Agricultural Hub Availability
    It sounds like you have an agricultural hub like the part # AS1500E that has a diameter of .75 where the inner bearing rides. You will need to measure the spindle of your trailer to verify this. Where the outer bearing rides will need to be 1.25 inches, the seal surface diameter 1.50 inches. The only hub we have to fit this hub would be the part # AH15450ECOMP.
    view full answer...

Do you have a question about this Trailer Spindle?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer spindles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer spindle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Jeff D
Expert Research:
Jameson C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924