2-1/8" x 1-1/8" Rectangle. Waterproof, incandescent trailer light serves as a side marker or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount with included hardware. 1-Wire design. P2 Rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (83 Customer Reviews)
2-1/8" x 1-1/8" Rectangle. Waterproof, incandescent trailer light serves as a side marker or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount with included hardware. 1-Wire design. P2 Rated.This product is the OEM lights for my Ranger boat trailer. I was able to replace the light that was broken and perfectly match the rest of the lights on the trailer.
I ordered both red and amber marker light for my trailer and was very upset to find the amber light only have a single LED and the red ones have 3 LEDs The triple light bar and the red lights match but mow the amber don"t. It looks bad on the trailer. The light all look the same when they are off.
Mike L - 05/28/2019
good
These look and feel like a good light for the money. I'm not a fan of a single bolt mount - holding the light in place. I anticipate having the light being inadvertently knocked off-center. Furthermore, there is not a ground wire on this light, thus you will need to wire the ground to a small screw on the back of the housing - if you have a boat trailer with fiberglass fenders.
It is a perfect match for the damaged o ne.
Product (Review the Wesbar Waterproof Clearance/Side Marker Lights - Amber - W003238 ) was delivered and was what I expected.
John C - 06/21/2016Bought four for boat trailer, two red and two Amber. They are made fairly cheap but they were cheap. The wax on the back side to make it water proof was so hard when I moved the wire it cracked. Also there were holes in the wax around the bolt where water could get in. I filled the area with silicon to elevate the problem. Also the tin is so thin one crushed onto itself when I tightens he nut onto it. To my surprise they did work. Well you get what you pay for.
Exactly like old lights but now can replace the bulbs. Installed perfectly in the old existing holes. I also purchased connectors in case they are ever replaced again.
Have ordered items in the past. Excellent company. Always keeps you up to date on status of order. Highly recommended.
Cleaning up an old trailer and this was a match for a broken light. Hard to beat etrailer
Matched the factory lights on my Chilton trailer perfectly.
The product is well constructed. I had to drill an additional hole in the trailer to feed the wire through. No big problem. On the original lamp the wire fed directly through the center of the mounting bolt, the new product it is fed from through the base and beside the bolt. My only real complaint is that it doesn't come with, or provide the option of ordering a connector for tying into the existing wiring. After five years the original connector was dry rotted and not reusable. Fortunately I had a spare connector for the job.
the only problem I have with this light is if you don't put a washer on the bolt to space it out, when you tighten it it pulls the led away from the lamp body and kills the lamp. I have gone through 4 of these in a year.
Fast and reliable service plus a quality product! I will be sure to order all future supplies through etrailer.com
NJC - 08/25/2018Very good quality
Exact replacement for the running lights on our trailer. Happy with the service and website.
Marilyn C - 04/17/2019You have the right replacement parts for my trailer and at a great price. I also glad I found your company on the internet. I will keep doing business with you for years to come.
Received the order as promised and although I sold the tow dolly before I received them or had a chance to use them they look of great quality and I'll likely use them in the future. I really like etrailer and toe information they provide. Thank you!
The light does not come with a lock (any) nut for the through-trailer bolt for install. If this is a new install (or had to bust the old one off due to salt corrosion, etc.) you have to go shag a 1/4 lock nut.
Quick delivery and exactly what I neede d.
Good price, timely delivery and simple ordering process.
worked out. great loved the pictures from different directions
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.