Product Experts Available Now!
Call 800-298-8924
Wesbar LED Trailer Clearance or Side Marker Light - Submersible - 1 Diode - Rectangle - Amber Lens
(64 reviews)
Price: $9.29
In Stock
Wesbar LED Trailer Clearance or Side Marker Light - Submersible - 1 Diode - Rectangle - Amber Lens
Item # 47-203667
Retail:$19.99
Our Price: $9.29
You Save: 54%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (64)
- Q & A (8)
- Videos (2)
- Photos
- Why etrailer?
Wesbar Trailer Lights - 47-203667
- Clearance Lights
- Rectangle
- LED Light
- Amber
- Surface Mount
- 2-1/2L x 1W Inch
- Wesbar
- Submersible Lights
- Rear Clearance
- Side Marker
2-5/8" x 1-1/4" Rectangle. Waterproof, LED trailer light serves as either a clearance or side marker light when properly mounted. Durable ABS housing. Recessed mount with grommet (not included). P2 rated.
Features:
- Rectangular LED trailer light functions as either a side marker or clearance light when properly mounted
- Sealed, waterproof lens and housing
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable ABS plastic base
- Amber snap-on lens over white LEDs
- Compatible with 12V DC electrical systems
- Recessed mount with grommet (221588 - sold separately)
- Requires 2-wire pigtail for wiring
- DOT compliant
- P2 rated
Specs:
- Dimensions: 2-5/8" long x 1-1/4" tall x 3/4" deep
- Diodes: 1
- 1-Year limited warranty
Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Recessed-Mount Light
Recessed-mount trailer lights install underneath a housing or a grommet (221588 - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
47-203667 Wesbar LED Trailer Clearance or Side Marker Light - Waterproof - 1 Diode - Rectangle - White Base - Amber Lens - P2 Rated
California residents: click here
Video of Wesbar LED Trailer Clearance or Side Marker Light - Submersible - 1 Diode - Rectangle - Amber Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Wesbar LED Side Marker Light Review
Speaker 1: Today we're going to be taking a look at the Wesbar LED Waterproof Grommet Mount Clearance Side Marker Light in amber, part number 47-203667. Now it's also available in red, using part number 47-203668. To help us with our installation, we're going to be using the Wesbar replacement grommet for Wesbar 15 series lights, part number 221588. So here is what our marker light is going to look like. Now it is an LED light, so it is going to be a lot brighter than the incandescent bulbs, and it is waterproof, which makes it perfect for our boat trailer. This is going to be a great replacement for that burnt out incandescent bulb, or if you have a marker light that's missing.
Our marker lights are going to fit perfectly into that Wesbar grommet that are found on most trailers. It's also available in red, for the marker light that's toward the back.Gerardo wrote in, saying it was an excellent product, "Easy to mount on the existing rubber grommet, and the trailer. The electrical connection with easy and flawless to the trailer. It gave a very clean and crisp light." So whether you're looking to replace your marker light because the incandescent bulb keeps burning out, or perhaps you just lost one, our LED marker lights are going to be a great replacement, because they're just going to simply plug into the same harness, and give you a lot cleaner, crisper of a light.The rubber grommet is just going to slide in. It's going to have a little lip on the backside, that's going to grab on.
So if we just kind of push one side in first, you may have to wiggle it in a little bit. It is meant to be a tight fit. Push one side in. Push it back, and just press it in place. Now to make it a little bit easier, I'm going to pull my wire out just enough so I can get the back of the light connected.
It's always a good idea to take a little bit of Dielectric grease, put to on the end of the contacts. Hopefully it will keep out any kind of moisture or corrosion from building up. Then on the back, we're just going to have to contact points that are going to plug into it. So we can just line them up, press it in place.The easiest way to get these lights in, is if you push one side at an angle in. Then you can kind of work from the backside.
Just work the light in around that rubber grommet, because again, it is meant to be a tight fit, so that it doesn't fall out. You may have to get a screwdriver, if you can't get it in by hand. We're just going to press it in place. For our back one, since it is going to be facing the back, we're going to be using a red light. Again, just put a little bit of Dielectric grease on the contact points. Then we can plug our light in. Hook that corner in place, and press the light in.Now that we have this side done, we're going ahead and repeat that, and replace the lights on the other side as well. With our wiring done, and our lights in place, we're going to go ahead and plug it into our tester, so we can make sure that all our lights and wiring our functioning properly. So if I turn my tester on, and put the tail lights on, we can see that all my lights are functioning. So now that we know everything is working properly, we can hook up and hit the road. That will finish up your look at the Wesbar LED Waterproof Grommet Mount Clearance Side Marker Light.
Customer Reviews
Wesbar LED Trailer Clearance or Side Marker Light - Submersible - 1 Diode - Rectangle - Amber Lens - 47-203667
Average Customer Rating: 4.9 out of 5 stars (64 Customer Reviews)
2-5/8" x 1-1/4" Rectangle. Waterproof, LED trailer light serves as either a clearance or side marker light when properly mounted. Durable ABS housing. Recessed mount with grommet (not included). P2 rated.
- 47-203667
by: Charles05/24/2018
Order process was easy because of pictures and specs. Order was shipped and received in a timely fashion. Product was as advertised and easy to install. 512620
- 47-203667
by: Mr. K06/21/2017
Perfect replacement for the incandescent style. I can always count on etrailer for fast shipping, knowledgeable staff, and great customer service! 397290
- 47-203667
by: Chris M.02/09/2017
Exact replacement, used the same mounting bolts. Came with a wiring adapter that I didn't have the mate for on the trailer but purchased at a local car parts store (in lieu of cutting off the connector and splicing) which gave me a better install than original. 342304
- 47-203667
by: David11/06/2017
Perfect replacement for my Wesbar clearance lights which are mounted in grommets on the trailer. 449513
- 47-203667
by: Andy10/13/2017
The marker lights I ordered arrived fast and look to be excellent guality. The price of the lights and the shipping cost was very reasonable. I'm very happy with the service of your company. Thank you 443207
- 47-203667
by: Brad06/15/2019
Great replacement for the other one that died. I have bright LEDS again. I replaced all of my trailer lights 2 yrs ago with these LEDS. Only 1 went bad, the other got knocked off. I highly recommend these lights as great bright lights making you visible! And look good too 658265
- 47-203667
by: Rich03/12/2018
Have bought several items and all have made my boat trailer top-notch. Web site is easy to navigate and customer service is excellent. Prompt and efficient. Time to hit the road and water. 483856
- 47-203667
by: Samuel B11/17/2018
Love the new light. Don't know how I lost the old one. Both it and the surrounding grommet were missing when I got home from my last fishing trip and the wires were just hanging there. After eleven years the rest of the lights on my easy loader trailer are all still working so I can't complain. Anyway, after eleven years, I wasn't sure how well this new light would match up. It is a perfect match, just a lot brighter than the rest. I mean really bright. But since it's a side marker on a single axle trailer, it isn't noticeable until you do your walk around inspection. So just a caution, if you're replacing one of these that sit's next to an identical unit, you might want to replace them as a set. But you certainly won't be disappointed in the performance. 583589
- 47-203667
by: Michael01/15/2019
Rewired my trailer last year. Replaced the incandescents with these LEDs. They are plenty bright. Regularly dunked in salt water. Still going strong. 597793
- 47-203667
by: Brian S04/06/2020
Great Lights! Beat the original incandescent lights 775221
- 47-203667
by: Rodney03/23/2020
The lights fit into the rubber gromet as they should, and the gromet fit into the trailer like a glove. Shipping was fast! 769806
- 47-203667
by: Don01/28/2020
Switched from bulbs to LED lighting on my boat trailer. Was growing tired of the constant maintenance of bulbs over the years; leakage of supposedly water-tight systems, remembering to disconnect the lights prior to launching and plugging them in prior to driving home. etc. The Optronics lights come with a lifetime warranty. They are sealed systems that will not burn out. The installation is simple... Upon testing the new system, you immediately recognize the incredible brightness and the stepped up brightness of the brake and turn signal lights. From safety, easy install, and low maintenance perspectives, I would recommend the Optronics LED system over the traditional bulbs. No regrets. 745403
- 47-203667
by: Robert10/02/2019
Perfect replacement. 711866
- 47-203667
by: Cliff10/16/2018
Thanks Nick! 574801
- 47-203667
by: Ron10/10/2018
Perfect replacement for EZ Loader 573158
- 47-203667
by: Robert09/09/2018
Working perfectly in the saltwater environment.... Great replacement! 563197
- 47-203667
by: Jim08/05/2018
Excellent product---works well. 550145
- 47-203667
by: Real07/26/2018
Excellent products. These lights work perfectly, are rugged and seem to last. The license plate lights are super bright so law enforcement have no problem reading the plate which avoids unnecessary stops. The lights are directs replacements as well so no modifications needed. Great products. I recommend etrailer to many of my friends and colleagues. 546097
- 47-203667
Alexander - 07/20/2019
58011
by: Alexander07/20/2018
Light was a perfect replacement on my ez-load trailer after a tire blow out jettisoned my stock one. 543678
Comments
Still going strong and no problems with these replacements.
Alexander - 07/20/201958011
- 47-203667
by: David06/05/2018
Excellent customer service!! No problems with my order 517771
- 47-203667
by: Ronald04/09/2018
works awesome thank you 494230
- 47-203667
by: Dan12/23/2017
Nice light. Very bright. 462294
- 47-203667
by: James11/30/2017
Exactly as ordered. Thank you! 456028
- 47-203667
by: ken m09/04/2017
replacement for original side light that had failed 428860
- 47-203667
by: Bill Mc08/22/2017
Exactly what I needed and exactly as described. Perfect! 423586
25
64
Show More Reviews
Ask the Experts about this Wesbar Trailer Lights
- Incandescent and LED Lights to Replace Wesbar Amber Marker Light # 203367The original part number you referenced, 203367, is the stock number for a light made by Wesbar, a producer of OEM and aftermarket trailer lighting. Their waterproof LED equivalent version, part # 47-203667, is indeed an exact drop-in replacement for the incandescent version. This light assembly uses a pigtail wire harness for connection, part # A46PB, and a rubber mounting grommet # 221588.
view full answer... - How to Make Best Ground Connection for Re-Wired Boat TrailerIt does sound like your new trailer wiring needs a stronger ground connection. If the coupler and frame are both steel you can use one of the coupler mounting bolts to secure the ground ring terminal for your main wiring harness but you may need to sand off any primer or powder-coat to allow for a bare metal to bare metal connection. This bare metal contact is necessary for a trouble-free ground. You can certainly use a self-tapping screw like # FA1131822 to secure the ground. You can...
view full answer... - Troubleshooting Installation of Clearance Light Grommet and LightThere are a couple of trick if you have the correct parts to match. The Replacement Grommet for Wesbar 15 Series Lights # 221588 are confirmed to fit the LED Waterproof Grommet Mount Clearance Side Marker Light - Red # 47-203668 and Amber # 47-203667 which measure 2-5/8" L x 1-1/4" W x 3/4" H. To get the proper fit, pliers is definitely not the route to go. Soapy water will help and because it is such a tight fit, put the grommet out in the sun for a little while to heat up so it...
view full answer... - Pigtail Harness Recommendation for LED Clearance Lights 47-203667 and 47-203668Yes, the pigtail part # A46PB that you referenced has been confirmed to fit both the # 47-203667 and the part # 47-203668. You may also be interested in the part # 221588 as well.
view full answer... - Procedure to Re-Install Trailer Side Marker LightsInstallation methods will vary depending on the nature of the particular light you are using. We offer a wide range of clearance/marker lights (all can be seen on the link provided) and these include flange-, flush- and surface-mount types. You can use the filters in the left-hand margin to narrow the product results shown to just those light that meet your requirements. You can sort by lens color, bulb type, mounting type, brand and dimensions. For example, in 2-1/2- x 1-1/2-inch size...
view full answer... - Grommet Recommendation for the LED Waterproof Grommet Mount Clearance Side Marker Light # 47-203667The recommended grommet for the # 47-203667 and # 47-203668 that you referenced is the part # 221588. Without knowing exactly what you have on your trailer it's hard to say why the lights you have won't fit it. Unless you can come up with a way to modify the grommet you have now the only recommendation I can make would be the part # 221588.
view full answer... - Availability of Wesbar Grommet Mounted Amber and Red Clearance/Marker LightsWe do indeed carry the Wesbar Red # 47-203668 and the amber # 47-203667 clearance/marker lights. We also carry the mounting grommet, part # 221588 and the wiring pigtail, part # A46PB. You can order the lights, grommets and pigtails online by following the provided links, or by phoning our Customer Service folks at 800-298-8924.
view full answer... - Grommet for Wesbar LED Waterproof Grommet Mount Clearance Side Marker LightThe grommet for trailer marker light # 47-203668 is sold separately. It is # 221588. The same grommet also fits amber light # 47-203667.
view full answer...
Do you have a question about this Trailer Light?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer lights for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer light information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Brian T
Expert Research:
Adam R
Installed by:
Cole B
Installed by:
Robert C
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.