Wesbar Combination Tail Light for Trailers Under 80" Wide - 7 Function - Driver Side

Ask the Experts about this Wesbar Trailer Lights

• Taillights to Replace Existing Wesbar 50010 on Ez Loader Trailer
  According to Wesbar, that lamp was discontinued around 2000 or so. Wesbar tells me that the # 745369 (3335) lens won't work with your existing lamps. Unfortunately, you'll need to replace the lamps but the good news is that they're not terribly expensive. You wouldn't want to use the # 2823283 as it isn't submersible and would not be the best choice for a boat trailer. I'd recommend going with # 2423056 for the passenger side and # 2423006 for the driver's side.
  view full answer...
• Closest Replacement for the Wesbar 50010 Trailer Light Assembly
  I was not able to find a replacement light assembly based on your provided number, 50010. A check with my contact at Wesbar reveals that they no longer have this light product; it was discontinued about 15 years ago. The light was a 4 x 4-inch unit according to my contact. The closest thing we have would be the part # 2823283 for the LH side and part # 2823284 for the RH side.
  view full answer...
• Purpose of Additional Holes on Back of Wesbar Standard Tail Light # 2823283
  As you mentioned in your question, the Wesbar Standard Tail Light - Left Hand # 2823283 uses pressure clips for installing the wiring that allow you to simply push the wire into the appropriate terminal for a secure connection. The smaller holes below these are actually used to release the wiring from the assembly if needed. You will just need to stick a small pin or nail into those holes to release the wiring from the hole above it. The additional hole for each the stop/turn and tail...
  view full answer...
• Recommended Replacement LED-Type Trailer Lighting for 1994 EZ-Loader Boat Trailer
  For a boat trailer you will want to use submersible LED lighting and the linked page will let you view all available submersible light assemblies in the LED type. Individual lights and also kits such as # TLL36RK are offered. On the page you can click on the filters to select lights by color, shape, size and mounting type. For example, in a red multi-function tail light near to your 6-1/16 x 3-inch size we have # STL56RB and # STL57RB. This light uses a 2-inch mounting hole spacing. If...
  view full answer...
• What Are Surface Mount Measurements For Wesbar Standard Tail Light - Item # 2823283
  The spacing for the surface mount bolts for the Wesbar Standard Tail Light, Item # 2823283, is 2 inches (picture attached). Let me know if you have any other questions.
  view full answer...
• Electric Brakes and Tail Light Wiring for Tandem Axle Trailer with Brakes on One Axle
  The wiring I would go with, based on your dual axle trailer with 1 axle electric brakes, is the 7-way molded connector (10 feet long) # 50-67-005. The wire is insulated which protects it well from the elements. I recommend getting a junction box like # 38656 because it makes it easier to diagnose problems when using a junction box. If you need wiring from the junction box to the brake assemblies, you can use duplex wire # 10-2-1. Protecting your wiring from corrosion and moisture is...
  view full answer...
• Taillight Replacement Lens for Wesbar Tail Light
  The closest replacement lens for your Wesbar light is going to be the Replacement Lens for Wesbar 80 Series Tail Light # 2423286. These are the rounded version and not perfectly square; the only lenses we carry which are perfectly square are unfortunately are going to be too large for your light. If you cannot find an exact replacement, you do have the option of installing new lights such as the 4-1/2" x 4-1/2" Wesbar # 2823283 for the left side and # 2823284 for the right side. I've...
  view full answer...
• Replacement Square 4-1/2" Lens Needed for Trailer Tail Lights
  Would you be able to send me a picture of the whole housing unit as well? If the Wesbar Replacement Lens # 745369 is correct then you would need to swap out your current lights as none of our square lens have that black shroud you are talking about. To swap out your current lights you can use the Wesbar parts # 2823284 and # 2823283 which has the same 4-1/2" lens as well as the side lens that you mentioned.
  view full answer...
• Replacement Red 4-1/2 Inch Trailer Tail Light Lens
  If the Wesbar Red Square Replacement Lens part # 745369 that you purchased which is 4-5/8" wide x 4-5/8" tall is too big then you may want to try the Replacement Red Lens for Optronics Square Stud Mount Combination Tail Lights part # A8RB which is 4-1/2" wide x 4-1/2" tall. However, trial and error is not really the best method to find the correct replacement lens. The best method is to look for a part number on the base of the light. With that being said, they don't offer a replacement...
  view full answer...
• Measurements of Replacement Trailer Tail Light Lens # 2423286
  Replacement lens # 2423286 is meant as a replacement for Wesbar light # 2823283 or # 2823284. These lights are 4-1/2 inches tall and 4-1/2 inches wide not counting the side lens. The lens rating is SAE AIST 03 DOT.
  view full answer...
• Replacement Lens # 2423286 Recommendation for a Wesbar Standard Tail Light # 2823284
  Yes, there is a replacement lens available for your Wesbar Standard Tail Light, part # 2823284, and part # 2823283. You will want a Replacement Lens for Wesbar 80 Series Tail Light, part # 2423286.
  view full answer...