bing tracking image
  1. Trailer Lights
  2. Wesbar
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
Wraparound LED Tail Light for Trailers Over 80" - 8 Function - Submersible - Red - Driver

Wraparound LED Tail Light for Trailers Over 80" - 8 Function - Submersible - Red - Driver

Item # 271595
lowest price pledge
Our Price: $51.86
You Save: 18%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.08 lbs
Wesbar Red Trailer Lights - 271595
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
7" x 3" Rectangle. Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate light for trailers wider than 80". Surface mount. Molded 2-way plug. Lowest Prices for the best trailer lights from Wesbar. Wraparound LED Tail Light for Trailers Over 80" - 8 Function - Submersible - Red - Driver part number 271595 can be ordered online at or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (271)
  • Q & A (0)
  • Photos
  • Why etrailer?

Wesbar Trailer Lights - 271595

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 7-1/2L x 3-1/2W Inch
  • Surface Mount
  • Stop/Turn/Tail
  • Side Marker
  • Rear Clearance
  • Side Reflector
  • Rear Reflector
  • License Plate
  • Submersible Lights
  • Wesbar

7" x 3" Rectangle. Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate light for trailers wider than 80". Surface mount. Molded 2-way plug.


  • Rectangular trailer tail light serves 8 functions
    • Stop light
    • Tail light
    • Turn signal light
    • Side marker light
    • Side reflex reflector
    • Rear clearance light
    • Rear reflex reflector
    • License plate light
  • Waterproof construction is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red lens
  • Mounts on surface of trailer - stainless steel hardware included
  • Molded 2-way plug and separate ground wire
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
  • Designed for use on trailers over 80" wide when properly mounted


  • Configuration: driver's side (left-hand side)
    • Passenger's-side light (271594) sold separately
  • Overall dimensions: 7" long x 3-3/4" tall x 3" deep
  • Diodes: 18
  • Mounting hole dimensions (center to center): 2"
  • Quantity: 1
  • Limited 1-year warranty


Combination Lights for Trailers Over 80" Wide

Flatbed trailer over 80" wide with combination tail lights

If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights. These clearance lights indicate the width of the trailer when it is viewed from the back.

To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function. For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.

Surface-Mount Light

Surface mount light

Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.

271595 Wesbar Combination LED Taillight for Trailers More Than 80" Wide - Red Lens - Left Hand

California residents: click here

Customer Reviews

Wraparound LED Tail Light for Trailers Over 80" - 8 Function - Submersible - Red - Driver - 271595

Average Customer Rating:  4.9 out of 5 stars   (271 Customer Reviews)

7" x 3" Rectangle. Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, rear reflex reflector, and license plate light for trailers wider than 80". Surface mount. Molded 2-way plug.


They look great had to switch them and mount them upside down. Do you have a round 1in back up lite for this trailer?

We have many round, 1 inch, red LED lights. This Item # MCL121RK9PVG
GloLight Uni-Lite Mini LED Clearance or Side Marker Light with Grommet - Turn - Round - Red Lens
has a supplemental turn signal. Or this item # MCL111RKB
GloLight Uni-Lite Mini LED Clearance or Side Marker Light with Grommet - Round - Red Lens
has a hard wire installation. They both have 2-Wire pigtails which includes power lead and ground wire.
-- Etrailer Expert Sierra K - 11/08/2021


Great LED replacement for my old Wesbar tail lights. Incredible how much brighter and functional these are - should have done it a long time ago. Very easy to install - uses existing wiring / plugs, and mounted to existing holes with no modifications. Much better visibility from drivers behind the boat even during the day - feel a lot safer now as well.


Replacement on my EZLoader boat trailer easy install good fit


As usual, I diagnosed the problem and ordered the parts as needed. As promised, needed parts arrived as scheduled and boat trailer lights fixed in time for my fishing trip.


This light was my perfect replacement for a Ranger 2004 521!


I was very impressed with the fit and finish of the product. Very nice LED lights!


no complaints, delivery fast. Tail light fit perfect.


I have a 2004 Ranger521 and my old trailer lights were shot! They do not make those lights anymore. I searched everywhere and called many trailer companies. With absolutely NO LUCK! I got on some of the Ranger Bass Boat forums and started seeing I wasn’t alone. But did find some of the owners found the substitute replacement. They all said etrailer had the replacements that would and did work perfectly. Some of the owners gave the part numbers that worked. I ordered them and received them in short order. They work better than the old ones and are LED’S they fit perfectly and are so much brighter!!! Thank You etrailer


order arrived in timely fashion and works perfectly


Very good lights fit better than previous lights I had to return that were a bad fit.
Still had to add brackets to modify fit. Pics are of original basic lights, previous lights that were a bad fit, and new lights.


Easy installation works great!


Only took 1 hour to install and they work great. They fit my 1998 ranger boat trailer.


ordered new LED trailer lights. They arrived on time were exactly what I had ordered
I installed them on my 2002 Triton Boat trailer. They look and work great


Had a tough time finding a trailer
locally and tried online.
etrailer made the search easy and they even upgraded the shipping at no extra cost. Recommended highly.


Bought these for my father-in-laws 95? Ranger Trailer tandem trailer, as some of the reviews state, the lights do need to be swapped, left for right and then turned upside down which then makes the license place light stick up. However, this is inside the well that the light sits in and barely noticeable. I places electrical tape over it and still there a year later. Very bright and highly recommend. Etrailer was very quick to get them to me too!


Delivered on time and in great condition. Thank you.


On time delivery. Great service


Have had them a year and they were exactly what I needed. Prompt service, lights correct ones and highly recommend ordering from this company.


Great service and follow up


Lights work very well. They fit well with the exception the light with the license plate lens needed to be mounted upside down and on the right side. I covered the clear lens with black tape. Trailer is a 1999 Ranger boat. In checking other trailers around the same time of manufacture, lights would have mounted correctly.

Works well!!
Steve - 05/03/2019


I bought this particular set of Boat Trailer Lights , because a fishing friend of mine has had them on his trailer for several years and has never had an issue with his trailer lights since I've known him ( over 10 years ). He told me about these lights and I finally checked them out and now I own some. I highly recommend these Sealed , LED Trailer lights .

I am still Very Happy with the Wesbar Trailer Lights . I have not had any problem with them at all. I recommend them to all of my boating friends. Thanks for asking.
Daniel W - 02/15/2019


Worked out great. Didn't realize it was only 1 light when I ordered - my fault. Ordered another one and didn't fit my existing holes so I just switched them around. Worked great and better then the ones I had.


Perfect replacement part for my damaged boat trailer light. This is the left side on an ezloader trailer. Got all the way to Alaska fast and was easy to install. The price was right and I'll be safely towing the boat to the fishing hole again soon!

Thanks etrailer!

Just took these lights to the boat launch again to. The Silver Salmon are running and so is my replacement tail light. Great performance. Thanks again trailer!
Terry D - 08/05/2017


These tail lights were perfect fit replacements on my 2003 Ranger Trail Trailer. They are awesome and trouble free compared to the original lights that came on it. I highly recommend this product as well as Etrailer.

Capt Dan

Thank you for checking in to see how the lights are working. Havent had the boat out this year but they were working awesome at the end of last season. Always glad to give etrailer good reviews because of the fantastic service I receive.
Capt D - 04/19/2018


The lights fit directly in the pontoon trailer enclosure and wired up easily. They've been submerged six(6) times so far with no problems. The LED lamps were lower cost than the original incandescent lamps and provide better light. I'm expecting many years of service from these lamps as they're less susceptible to damage from the empty trailer shocks. Good product.

Lights continue working fine after two seasons of inout with no problems - they are submerged six 6 times per season.
Michael - 09/11/2019

Show More Reviews

See what our Experts say about this Wesbar Trailer Lights

  • Dimensions of 8-Function Wesbar LED Wrap-Around Trailer Taillight
    I have produced a photo for you showing the dimensions of the Wesbar 8-Function LED Wrap-Around Trailer Lamp, # 271595. As you can see, the lamp is 3-1/2 inches tall, 7-1/2 inches at its widest point and 3-1/4 inches deep at the thickest point.
    view full answer...
    Image 1 for
  • Will Wraparound LED Trailer Tail Lights # 271595 Work on Fiberglass Trailer
    The Wraparound LED Tail Light for Trailers Over 80 inch - 8 Function - Submersible - Red - Driver Item # 271595 will work well on a fiberglass trailer. These assemblies come with mounting bolts that attach to the trailer and then the assembly gets mounted to them. The mounting bolts may not totally line up with what you currently have but you should have no problem using them in new holes.
    view full answer...
  • Troubleshooting Partially Lit LED Trailer Running Light Assembly
    LED lights can be partially illuminated by a very small amount of current. What it sounds like is happening is that the trailer wiring circuits of your tow vehicle have a tiny bit of current running through them when the circuits aren't being used and that is why the lights are dimly lit. What you described is a somewhat common occurrence that you wouldn't have to worry about. Your trailer and wiring would not be adversely affected.
    view full answer...
  • Trailer Taillight Recommendations for a 2013 Shorelander Boat Trailer
    Most likely you have the Wesbar Wraparound trailer taillights. The correct LED replacement lights for those would be the # 271595 for the left hand side and part # 271594 for the right hand side.
    view full answer...
  • Replacement LED-Type Trailer Lights for 2014 Shoreland'r Personal Watercraft Trailer
    The best way to find a compatible efficient LED-type trailer light to replace the incandescent units on your trailer is to remove one of the existing lights to see how it is wired and how it mounts. (The Shoreland'r website does not provide specs for the lighting products used on their trailers.) If your current light uses a 2-prong plug and separate ground wire like the Wesbar # 271594 then this will be a good choice. This light mounts using two supplied screws, lockwashers and nuts. This...
    view full answer...
  • LED Wesbar Wrap-Around Tail Light Recommendation for Aliner Camper
    You will want the Wesbar 8-Function LED Wrap-Around Tail light # 271595 for the left hand side of your trailer, and for the right side you will want the Wesbar 7-Function LED Wrap-Around Tail Light # 271594. These lights are LED and have a very similar shape and design as the current lights you have on your trailer so these should work perfectly for you. The reason the left had side light has 8 functions and the right side has 7 functions is that the left-hand side light has a license...
    view full answer...
  • Replacement LED Taillights for 2003 Ranger Trail Boat Trailer
    No problem, we're here to help! My research confirms that the # 271595 and # 271594 are the correct replacement lamps for your trailer. Your existing lamps should measure 3-1/2 inches tall, 7-1/2 inches long (at the longest point) and 3-1/4 inches deep. I've linked to a product demonstration video.
    view full answer...
    Image 1 for
  • Difference Between Wesbar 7 and 8-Function Wrap-Around Tail Lights Part # 271594 and 271595
    The difference between the Wesbar 7-Function LED Wrap-Around Tail Light, part # 271594 and the 8-Function LED Wrap-Around Tail Light, part # 271595 is that the 8-function lamp will project downward from the underside of the lamp assembly to illuminate the trailer license plate.
    view full answer...
  • WESBAR Replacements Tail Lights for a 2001 EZ loader Boat Trailer
    Yes, the Wesbar Trailer light part # 271594 and # 271595 are the correct replacement lights for your EZ Loader boat trailer. We had a customer in your exact situation say these worked perfectly on his EZ loader trailer and even added that these were brighter than the originals.
    view full answer...
  • Replacement LED Wrap Around Lights For 1999 Rangertrail Trailer
    I have attached a photo of the 7-Function LED Wrap-Around Tail Light, part # 271594 you can check out. The dimensions are noted on the photo. You can compare those to the lights you currently have on your 99 Rangertrail trailer and see if this will be a match. The # 271594 is for the right side of the trailer and for the left side you would want part # 271595, which is the same as the right hand but includes a license plate light. You should have no problem replacing your incandescent...
    view full answer...
  • Availability of Replacement Lens for Wesbar LED Tail Lights 271594 and 271595
    According to our contact at Wesbar, the Wraparound LED Tail Light - Passenger # 271594 and Driver # 271595 referenced in your question are sealed tail lights and they do not have replacement lenses available. If the lens or unit is damaged on your trailer, the entire light will need to be replaced.
    view full answer...
  • Replacement LED Trailer Lights For 1996 Ranger Trail Trailer
    I was not able to find the part number of the lights you have on your trailer but I did attach a link to the lights we offer that may work with your 1996 Ranger Trail Trailer. We have had customer put wraparound lights like part # 271594 for the passenger side and # 271595 for the driver side of their trailer. These lights measures 7-1/2 inches long x 3-1/2 inches tall and 3-1/4 inches deep. These lights have 18 LED diodes and the mounting holes are 2 inches apart on center.
    view full answer...
  • Wesbar LED Taillights for 1998 Ranger Trailer
    The Wesbar Wraparound LED Tail Lights you referenced, parts # 271594 and # 271595, are surface-mount lights that install using two mounting studs spaced apart 2-inches and a 3-wire electrical connection. Overall dimensions of the lights are 7-1/2 long x 3-1/2 tall x 3-1/4 deep. You may be able to find a part reference number on your light's base (not the lens) that will help identify comparable replacements unless the dimensions above do so. All LED tail lights are linked.
    view full answer...
    Image 1 for
  • Recommended Replacement Brake and Signal Lights for 1681 Palomino Camper
    We have a large selection of trailer lights available, which I have linked for you to look through. I recommend taking a couple of quick measurements on your existing lights so you can choose one of roughly the same size. For example, the Wesbar Wraparound LED Tail Light for Driver Side # 271595 and for Passenger Side # 271594 is a great option. The assembly is 7-1/2 inches long, 3-1/2 inches tall, and 3-1/4 inches deep. I features mounting holes that are spaced 2 inches apart on center....
    view full answer...
  • Replacement 105826 Wesbar Lens Needed
    We do have the both the fixture and bulb listed as the LED version which can be found as part # 271594. The matching drivers side light is part # 271595. Unfortunately the Webster 102640 bulb and 105826 lens are no longer available.
    view full answer...
  • Replacement LED Tail Light Options for a 2008 Cherokee Grey Wolf
    We do have replacement red LED lights but you will need to go measure the ones that are currently on your trailer to ensure a correct fit. I have attached a link to our selection of red LED lights which can be filtered through by selecting the proper size. The Wesbar Wraparound LED Tail Light, part # 271595 for driver side and part # 271594 for passenger side, are an excellent choice for LED lights. The dimensions are 7-1/2" long x 3-1/2" tall x 3-1/4" deep.
    view full answer...
  • Recommended LED Replacement for Wesbar 107963 Tail Lights
    To replace the Wesbar 107963 Tail Light Assembly on your trailer, I recommend the Wesbar Wraparound LED Tail Light # 271594 for the Passenger Side and # 271595 for the Driver Side. These are extremely similar to your existing tail light assemblies and will provide the closest option for a direct replacement. These measure 7-1/2 inches long, 3-1/2 inches tall and 3-1/4 inches deep. They feature mounting holes that are 2 inches apart on center. I have attached a video demonstration on...
    view full answer...
  • Availability of Wesbar Wraparound Light # 105 825 -26 Replacement
    Can I see a picture of the assembly you are refering to? I can't find any info on it.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Wraparound LED Tail Lights for 2001 Jayco Eagle Pop Up Camper
    The Wesbar Wraparound LED Tail Light # 271595 for the Driver Side and # 271594 for the Passenger Side referenced in your question are surface mounted assemblies. These can mount directly to the surface of your trailer and do not need to be installed on a bumper as you mentioned. These should work very nicely to replace your existing lights and mount to their current location. The assemblies measure 7-1/2 inches long, 3-1/2 inches tall and 3-1/4 inches deep. The mounting holes are spaced...
    view full answer...
  • Replacement Wrap Around Wesbar Tail Lights
    The Replacement Red Lens Kit for Wrap Around Tail Light 105825-26 are replacement lenses for model 403028 Wesbar wraparound tail lights, which were made obsolete in early 2011 so the whole assembly is no longer available. They were replaced by the higher performing LED versions, the Wraparound LED Tail Light - Driver's Side # 271595 and Wraparound LED Tail Light - Passenger's Side # 271594. These assemblies are 7-1/2" long x 3-1/2" tall x 3-1/4" deep with mounting holes that are 2" apart...
    view full answer...
  • Replacement Taillight Assemblies for 2002 Ranger Trail Boat Trailer
    According to my research, the Wesbar # 271594 (right hand) and # 271595 (left hand) are the correct replacement taillights for Ranger boat trailers of that vintage. Your existing taillights should measure 3-1/2 inches tall, 7-1/2 inches long (at the longest point) and 3-1/4 inches deep.
    view full answer...
    Image 1 for
  • Is a Replacement Taillight Lens Available for 1998 Jayco Eagle
    Thank you for the photos of your trailer taillight lenses. I have a solution for you, but we do not have replacement taillight lenses to fit the existing Wesbar lights on your 1998 Jayco Eagle. Many of the Wesbar lights used on Jayco trailers are now discontinued and replacement parts are not available. Since replacement lenses aren't available, the next best option is to replace the taillights. In place of your existing wraparound taillights, I like the Wesbar LED Wrap-Around Tail Light,...
    view full answer...
    Image 1 for
  • 7-Function Tail Light For Trailer Over 80 Inches Wide
    For the 7-Function LED Wrap-Around Tail Light, part # 271594, Rh means it is for the right hand or passenger side of the trailer. This light is a waterproof LED tail light that is designed for trailers that are over 80 inches wide. It has 7 functions which are stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex and license plate illuminator. This light If you need the driver side light you would need part # 271595 which has the same 7 functions along with the...
    view full answer...
    Image 1 for
  • Replacement Trailer Tail Lights on 2001 Jayco Kiwi
    The best way to find the exact lights for your trailer is to measure the lights and match them up with a product. I looked up your 2001 Jayco Kiwi and the tail lights look very similar to # 271595 and # 271594 for the driver and passenger sides, respectively. They measure 7-1/2 long by 3-1/2 tall, by 3-1/4 deep. These are also LED lights which will last longer and draw less power than incandescent lights. If these aren't the correct lights for your Jayco let me know the dimensions of...
    view full answer...

< Previous
123. . .6

Do you have a question about this Trailer Light?

  • Why

    At we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video Edited:
Jacob T
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.