1. Trailer Lights
  2. Wesbar
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
Wraparound LED Tail Light for Trailers Over 80" - 7 Function - Submersible - Red - Passenger

Wraparound LED Tail Light for Trailers Over 80" - 7 Function - Submersible - Red - Passenger

Item # 271594
lowest price pledge
Retail:$48.98
Our Price: $33.25
You Save: 32%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.05 lbs
Quantity: 
In Stock
Wesbar Trailer Lights - 271594
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

7" x 3-3/4" Rectangle. Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount. Molded 2-way plug. Lowest Prices for the best trailer lights from Wesbar. Wraparound LED Tail Light for Trailers Over 80" - 7 Function - Submersible - Red - Passenger part number 271594 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (210)
  • Q & A (102)
  • Photos
  • Why etrailer?

Wesbar Trailer Lights - 271594

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • Surface Mount
  • 7-1/2L x 3-1/2W Inch
  • Wesbar
  • Submersible Lights
  • Stop/Turn/Tail
  • Side Marker
  • Rear Clearance
  • Side Reflector
  • Rear Reflector

7" x 3-3/4" Rectangle. Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount. Molded 2-way plug.


Features:

  • Rectangular trailer tail light serves 7 functions
    • Stop light
    • Tail light
    • Turn signal light
    • Side marker light
    • Side reflex reflector
    • Rear clearance light
    • Rear reflex reflector
  • Waterproof construction is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red lens
  • Mounts on surface of trailer - stainless steel hardware included
  • Molded 2-way plug and separate ground wire
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
  • Designed for use on trailers over 80" wide when properly mounted


Specs:

  • Configuration: passenger's side (right-hand side)
    • Driver's-side light (271595) sold separately
  • Overall dimensions: 7" long x 3-3/4" tall x 3" deep
  • Diodes: 18
  • Mounting hole dimensions (center to center): 2"
  • Quantity: 1
  • Limited 1-year warranty


DimensionsDimensions

Combination Lights for Trailers Over 80" Wide

Flatbed trailer over 80" wide with combination tail lights

If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights. These clearance lights indicate the width of the trailer when it is viewed from the back.


To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function. For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.


Surface-Mount Light

Surface mount light

Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.



271594 Wesbar Combination LED Taillight for Trailers More Than 80" Wide - Red Lens - Right Side




California residents: click here



Customer Reviews

Wraparound LED Tail Light for Trailers Over 80" - 7 Function - Submersible - Red - Passenger - 271594

Average Customer Rating:  4.8 out of 5 stars   (210 Customer Reviews)

7" x 3-3/4" Rectangle. Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount. Molded 2-way plug.

- 271594
by:

Service from etrailer was great, but the information on the page was wrong. This light does not exactly fit older Rangertrail trailers. In a response from an Etrailer expert it said it does. The curve is exactly the opposite of the trailer, so you have to install the light upside down on the opposite side. You can take the right one and put it on the left side and the left one and put it on the right and it follows the lines of the fender. The only problem with this is the license plate illumination is on the upper side on the right hand side of the trailer. We'll see how that works. I can't believe Wesbar doesn't provide a LED trailer light that isn't exactly the same shape as the old light. We'll see how these LED's work out. If they don't it is back to old lights with the sealed bulbs that continually leak. Really got sick of lights being out. One other thing. You will need a double pigtail connector for these lights. Etrailer should add this item to the ordering page so you know to get it. You could always cut and solder the wires, but why, when you have a nice connector. Luckily I had a few of these or it would have been off to the store. 158027


Comments
I found the exact same thing that Steve_Austin is talking about, when i had to order a LH replacement. I ordered LH and it didnt match. Had to order a RH and turn it over to make it fit.
-- comment by: Jon S - 01/19/2015

8733

Thanks for the additional information. Multiple trailer and RV manufacturers have used these lights in a variety of orientations.

-- Rachael H - 1/21/2015


- 271594
by:

Fit just like the original equipment on an old Stratos boat trailer. 827499



- 271594
by:

Easy ordering fast delivery thank you very much 822861



- 271594
by:

Replacement for a damaged light. Works great...easy to order. Will return for any future needs 822257



- 271594
by:

easy to find and order. 821862



- 271594
by:

Great product...super fast shipping.. 821577



- 271594
by:

Love the new LED lights for my Jayco Eagle Pop up tent trailer 2000. So much brighter and are a great replacement for old wrap around style that they don’t make anymore. 821328



- 271594
by:

Great product! Received three days after I ordered online. Replaced my Westbar incandescent tail lights on 2000 javelin boat trailer and fit perfectly. 818466



- 271594
by:

Ordered on 6-7 arrived on 6-19 Taillight came in good condition and was a direct replacement so the installation was easy. 818421



- 271594
by:

Perfect fit. Arrived quickly. 816287



- 271594
by:

Delivery was easy to track. The light was a prefect match. Installation , for a first timer, though not easy was done. Wiring harness was included pre-attached to light which helped tremendously with installation. Total removal and installation, 1st time ever doing so, was about 30-45 minutes - cursing held to a minimum. 812169



- 271594
by:

Product was as advertised, I’ve had it for a year now, still working as it should. 812069



- 271594
by:

Bought these for my father-in-laws 95? Ranger Trailer tandem trailer, as some of the reviews state, the lights do need to be swapped, left for right and then turned upside down which then makes the license place light stick up. However, this is inside the well that the light sits in and barely noticeable. I places electrical tape over it and still there a year later. Very bright and highly recommend. Etrailer was very quick to get them to me too! 809076



- 271594
by:

The hardest part was getting the old Wesbar ones off my Ranger trailer. New ones look great! 808588



- 271594
by:

After one year of use I had had no issues with my trailer lights. They fit my trailer and look like factory. Nice and bright. 808143



- 271594
by:

Lights fit perfectly on my 95 EZ load trailer, Thanks again for a great website and service. 803233



- 271594
by:

Very good experience with these guys. Will definitely use them again. 781995



- 271594
by:

Very good product, quick delivery 779116



- 271594
by:

Only complaint I have is that they don't match the contours of the trailer unless you flip the lights, but other than that they are great. 1995 Ranger bass boat trailer is the application. 776712



- 271594
by:

Received order today and got all replacement led lights for my Ranger trailer. Works great. Super fast service. Anthony was real friendly and a big help in ordering. Will not be my last order with this company. No way order could have been better. Thanks a lot. 775687



- 271594
by:

The product was promptly shipped and arrived securely boxed and wrapped. The trailer lights were exactly what I ordered and worked perfectly. 764064



- 271594
by:

i was very pleased that my parts shipped immediately and i received them on time the quality was premium 763214



- 271594
by:

Light works great after numerous dips in saltwater. Easy install as well. 744961



- 271594
by:

Works great really make My ranger look up to date 736491



- 271594
by:

Fit and look just like the originals and they are LEDs 735278


25
218
Show More Reviews

Ask the Experts about this Wesbar Trailer Lights

  • Wesbar 271594 and 271595 LED Trailer Taillight Recommendation for Ranger Trailer
    The Wesbar trailer taillights part # 271594 (right hand) and # 271595 (left hand) would be a great choice for your trailer that currently has Wesbar lights. These are pretty universal in the way they install so they fit on your Ranger trailer and work well. I attached a dimension picture for you to check out as well.
    view full answer...
  • Replacement Tail Lights for a 2003 Ranger 520vx Trailer
    While I do not know which lights specifically were on your 2003 Ranger trailer I can tell you how to determine if lights # 271594 and # 271595 will fit in place of the originals. These new lights mount on the heads of bolts. There are 3 channels on the backs of the lights for this but you need to only use 2 of them. The centers of the channels are spaced 2 inches apart. If your lights mount the same way then these can be used. They also feature molded 2-way plugs and separate ground...
    view full answer...
  • Replacement LED Light Assemblies for Wesbar 403078 on Trailer
    The lights you have on your trailer are Wesbar 403078 model assemblies and they are unfortunately obsolete. For a similar LED light that should work well as a replacement I recommend the Wesbar Wraparound LED # 271594 for the Passenger Side and # 271595 for the Driver Side. These lights have overall dimensions of 7 inches long, 3-3/4 inches tall, and 3 inches deep. The mounting holes are spaced apart 2 inches on center. I have also attached a diagram with these and some additional measurements...
    view full answer...
  • Upgrading To LED Tail Lights On a Ranger 620VS Boat Trailer
    The Wesbar Wraparound LED Tail Lights part # 271594 for passenger or part # 271595 for driver appear to be very similar to that of those on your 2002 Ranger 620VS Boat Trailer so they should work in their place just fine. The Wesbar Wraparound LED Tail Lights are submersible so you won't have any issue here either. The plug from the rear of the lights can be removed if it does not match what you have on your trailer now. These will be the best replacement option we have for your trailer...
    view full answer...
  • Comparing Wesbar Trailer LED Waterproof Tail Light # 271594 to # 281594
    They are the exact same light they are just packaged differently. They are 7.53" x 3.48" x 3.13", waterproof, and compatible with trailers over 80 inches wide. The # 271594 is simply the number they sell in bigger numbers to retailers and the 281594 is the individual light in the more retail looking plastic clamshell you'd see on the shelf for display. It is exactly the same light just the manufacturer packaging is slightly different.
    view full answer...
  • Does Mounting Submersible Lights Upside Down Cause a Drainage Issue
    When mounting the WesBar Wraparound LED Tail Light part # 271594 and part # 271595 upside down there would be a drainage issue but it is not something that can't be overcome. This is because they have a drain at the bottom of the light to let the water run out after they are submerged this is generally a small notch in the lens. So to overcome that after you have them installed remove the lens and add your own notch on what is now the bottom to allow for the same drainage. That will...
    view full answer...
  • Availability of Wesbar Wraparound Light # 105 825 -26 Replacement
    Can I see a picture of the assembly you are refering to? I can't find any info on it.
    view full answer...
  • LED Trailer Light Recommendation for 1999 Ranger Trail Trailer
    Previous customers of ours that have had a Ranger Trail trailer like your 1999 model had Wesbar wraparound taillights on them. The LED version of this light would be the part # 271594 for the right hand side and part # 271595 for the left hand side. I wasn't able to find any decent pictures of the clearance lights on your trailer online, but I attached a link to a page that has all of the LED clearance lights we offer for you to check out.
    view full answer...
  • Wesbar LED Taillights for 1998 Ranger Trailer
    The Wesbar Wraparound LED Tail Lights you referenced, parts # 271594 and # 271595, are surface-mount lights that install using two mounting studs spaced apart 2-inches and a 3-wire electrical connection. Overall dimensions of the lights are 7-1/2 long x 3-1/2 tall x 3-1/4 deep. You may be able to find a part reference number on your light's base (not the lens) that will help identify comparable replacements unless the dimensions above do so. All LED tail lights are linked.
    view full answer...
  • All Light Flash with Turn Signal Engaged Using In-Bed 7-Way Trailer Wiring Harness
    The first thing I would check is to see if there is any corrosion on the pins inside of the in-bed/bumper 7-way as well as the t where the in-bed 7-way connects to the bumper 7-way. I wound also check for wire shorts on as much of the harness as you can. I didn't catch what tow vehicle you have but some in-bed 7-ways can be pinned differently so it will be important that you have the correct in-bed wiring harness. If the in-bed 7-way operates in the same fashion as the bumper 7-way then...
    view full answer...
  • LED Tail Light Recommendations for a 1998 Jayco Eagle Pop-Up Camper
    The Wesbar light # 271594 hangs on studs so it would not work in place of the lights on your Jayco trailer but I do have another recommendation. Take a look at light # RVSTL61 for the left and # RVSTL60 for the right. These lights have mounting holes that are space 7-3/8 inches apart on center side to side and 2 inches on center top to bottom. If the lights you have now have the same mounting pattern these can be used though they do not have the same dimensions as the old lights.
    view full answer...
  • Difference Between Wesbar 7 and 8-Function Wrap-Around Tail Lights Part # 271594 and 271595
    The difference between the Wesbar 7-Function LED Wrap-Around Tail Light, part # 271594 and the 8-Function LED Wrap-Around Tail Light, part # 271595 is that the 8-function lamp will project downward from the underside of the lamp assembly to illuminate the trailer license plate.
    view full answer...
  • Installing a New Trailer Connector On an Old Trailer with Red, Black, Brown, and Grey Wires
    It sounds like you are trying to replace the trailer connector on your trailer. If that is the case then I can offer assistance but I won't be able to tell you exactly which connections to make nor would anyone for the exception of the person who installed the existing wiring harness. The reason being is that the colors you have (red, black, brown, and grey) are not inline with the industry standards which means we would have no reference to their function. Therefore, you are going to need...
    view full answer...
  • Replacement LED-Type Trailer Lights for 2014 Shoreland'r Personal Watercraft Trailer
    The best way to find a compatible efficient LED-type trailer light to replace the incandescent units on your trailer is to remove one of the existing lights to see how it is wired and how it mounts. (The Shoreland'r website does not provide specs for the lighting products used on their trailers.) If your current light uses a 2-prong plug and separate ground wire like the Wesbar # 271594 then this will be a good choice. This light mounts using two supplied screws, lockwashers and nuts. This...
    view full answer...
  • Replacement Taillight Assemblies for 2002 Ranger Trail Boat Trailer
    According to my research, the Wesbar # 271594 (right hand) and # 271595 (left hand) are the correct replacement taillights for Ranger boat trailers of that vintage. Your existing taillights should measure 3-1/2 inches tall, 7-1/2 inches long (at the longest point) and 3-1/4 inches deep.
    view full answer...
  • Replacement LED Trailer Lights For 1996 Ranger Trail Trailer
    I was not able to find the part number of the lights you have on your trailer but I did attach a link to the lights we offer that may work with your 1996 Ranger Trail Trailer. We have had customer put wraparound lights like part # 271594 for the passenger side and # 271595 for the driver side of their trailer. These lights measures 7-1/2 inches long x 3-1/2 inches tall and 3-1/4 inches deep. These lights have 18 LED diodes and the mounting holes are 2 inches apart on center.
    view full answer...
  • Replacement 105826 Wesbar Lens Needed
    We do have the both the fixture and bulb listed as the LED version which can be found as part # 271594. The matching drivers side light is part # 271595. Unfortunately the Webster 102640 bulb and 105826 lens are no longer available.
    view full answer...
  • WESBAR Replacements Tail Lights for a 2001 EZ loader Boat Trailer
    Yes, the Wesbar Trailer light part # 271594 and # 271595 are the correct replacement lights for your EZ Loader boat trailer. We had a customer in your exact situation say these worked perfectly on his EZ loader trailer and even added that these were brighter than the originals.
    view full answer...
  • Replacement Tail Light for Over 80 Inch Stratos Boat Trailer
    The Wesbar Wraparound LED Tail # 271594 for the passenger side and # 271595 for the driver side appear that they can be the same style lights. The best way to know for sure is to measure your current lights. These two are 7-1/2 inches long, 3-1/2 inches tall and 3-1/4 inches deep. If this matches your lights then these are exactly what you need.
    view full answer...
  • Availability of Replacement Lens for Wesbar LED Tail Lights 271594 and 271595
    According to our contact at Wesbar, the Wraparound LED Tail Light - Passenger # 271594 and Driver # 271595 referenced in your question are sealed tail lights and they do not have replacement lenses available. If the lens or unit is damaged on your trailer, the entire light will need to be replaced.
    view full answer...
  • LED Wesbar Wrap-Around Tail Light Recommendation for Aliner Camper
    You will want the Wesbar 8-Function LED Wrap-Around Tail light # 271595 for the left hand side of your trailer, and for the right side you will want the Wesbar 7-Function LED Wrap-Around Tail Light # 271594. These lights are LED and have a very similar shape and design as the current lights you have on your trailer so these should work perfectly for you. The reason the left had side light has 8 functions and the right side has 7 functions is that the left-hand side light has a license...
    view full answer...
  • Replacement Wraparound Trailer Taillight Recommendation to Replace Obsolete Lights
    The Wesbar tail lights that you are looking for were made obsolete in 2011. Your best option would be to replace them with a similar LED version, # 271594 for the right and # 271595 for the left side. At this time this would be your best option.
    view full answer...
  • Replacement LED Wrap Around Lights For 1999 Rangertrail Trailer
    I have attached a photo of the 7-Function LED Wrap-Around Tail Light, part # 271594 you can check out. The dimensions are noted on the photo. You can compare those to the lights you currently have on your 99 Rangertrail trailer and see if this will be a match. The # 271594 is for the right side of the trailer and for the left side you would want part # 271595, which is the same as the right hand but includes a license plate light. You should have no problem replacing your incandescent...
    view full answer...
  • Replacement Taillight Recommendation for 2002 Feather Light Utility Trailer
    Looking at your trailer it looks like the # 271594 would be a great option. With trailer lights like this the application is pretty universal. You are free to install several styles of lights as the mounting of the lights is pretty basic and not hard to modify if needed. The matching other side is the part # 271595.
    view full answer...
  • 7-Function Tail Light For Trailer Over 80 Inches Wide
    For the 7-Function LED Wrap-Around Tail Light, part # 271594, Rh means it is for the right hand or passenger side of the trailer. This light is a waterproof LED tail light that is designed for trailers that are over 80 inches wide. It has 7 functions which are stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex and license plate illuminator. This light If you need the driver side light you would need part # 271595 which has the same 7 functions along with...
    view full answer...
  • How to Wire Wesbar 7-Function LED Wrap-Around Tail Light 271594
    Thank you for your photo. On your trailer's original lights the connector's exposed pin is the ground while on your replacement light # 271594 the ground is on the white wire as you noted. For these new lights the red wire carries stop/turn signals while the black wire carries running light signal. You can use butt connectors like # 05731-5 to make your wire splices and we recommend also applying electrical tape over those splices to protect them.
    view full answer...
  • Replacement Lights for Coleman Camper Trailer
    We carry all types and many brands of trailer lights and replacement parts. You can see all on the linked page. Just click on the type of light you need, such as a clearance or taillight. Then you can simply click on the shape and color you need. You can even sort the products by brand, size and function to narrow them down. For instance, for a right- (passenger-) side taillight with LED operation you could use # 271594. Often the easiest way to go is to check the light base (not the...
    view full answer...
  • Troubleshooting Malfunctioning Wesbar LED Trailer Lamps on EZ Loader Boat Trailer
    Are any of the functions of the lamps working at all, or are they completely dead? As a first step, I'd remove the lamps from the trailer, and use a 12 volt battery to apply power directly to the leads on the back of the lamp. Ground the white lead to the negative post of the battery, and apply power to the pin and socket for the red and black wire. If the lamps work in this manner, there's a wiring problem on the trailer that needs to be tracked down and repaired. If both lamps are...
    view full answer...
  • Locating Replacement Tail Lights for 1986 Coleman Sun Valley Americana
    We do not have any replacement lenses available that match the dimensions that you listed for your original tail lights. On an older camper like your Coleman Sun Valley Americana it might be pretty difficult to find direct replacements as the original assemblies are likely no longer made. Because of this your best option may be to replace the tail light assemblies altogether. Based on pictures I was able to find of the 1986 Coleman Sun Valley Americana it appears to have wraparound...
    view full answer...

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Brian T
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.