Wesbar Combination Trailer Tail Light - Submersible - 7 Function - Incandescent - Driver Side

Wesbar Combination Trailer Tail Light - Submersible - 7 Function - Incandescent - Driver Side

Item # 2423006

lowest price pledge

Retail:$13.32

Our Price: $9.21

You Save: 31%
Trailer Lights

Orders above $50 qualify for Free Shipping

Shipping Weight: 0.59 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock
2423006 - Stop/Turn/Tail,Side Marker,Side Reflector,Rear Reflector,License Plate Wesbar Tail Lights
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

5-1/4" x 4-11/16" Square. Waterproof, incandescent trailer tail light serves 7 functions: stop, turn, tail, rear reflector, side reflector, side marker, and license plate light. Shock proof socket protects bulb. Stud mount. 2-Wire design. Lowest Prices for the best trailer lights from Wesbar. Wesbar Combination Trailer Tail Light - Submersible - 7 Function - Incandescent - Driver Side part number 2423006 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (28)
  • Q & A (6)
  • Videos (2)
  • Photos
  • Why etrailer?

Wesbar Trailer Lights - 2423006

  • Tail Lights
  • Square
  • Incandescent Light
  • Red
  • Surface Mount
  • 5L x 5W Inch
  • Submersible Lights
  • Wesbar
  • Stop/Turn/Tail
  • Side Marker
  • Side Reflector
  • Rear Reflector
  • License Plate

5-1/4" x 4-11/16" Square. Waterproof, incandescent trailer tail light serves 7 functions: stop, turn, tail, rear reflector, side reflector, side marker, and license plate light. Shock proof socket protects bulb. Stud mount. 2-Wire design.


Features:

  • Red, square trailer light serves 7 functions for trailers less than 80" wide
    • Stop, turn, tail, rear reflex, side marker, side reflex
    • Built-in license plate light illuminates trailer license plate
  • Sealed, waterproof housing and lens unit is submersible
  • Built-in reflector removes the need for a separate reflector
  • Shock-proof sockets protect bulbs against damage
  • Incandescent bulb can be easily replaced
  • Durable plastic housing with screw-on lens
  • Red lens over incandescent bulb
  • Compatible with 12V DC systems
  • Stud mount to trailer with included studs
    • Foam gasket creates a weathertight seal
  • 2-Wire design grounds through mounting hardware
  • DOT compliant


Specs:

  • Configuration: driver side
    • Passenger side: 2423056 (sold separately)
  • Dimensions: 5-1/4" wide x 4-11/16" tall x 3-3/4" deep
  • Distance between mounting studs (center on center): 2"
  • Bulb type: incandescent
  • 1-Year limited warranty


Wesbar Submersible Incandescent Combination Tail Light Dimensions

Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.



2423006 Wesbar Combination Tail Light for Marine Trailers Under 80" Wide - Submersible - 7 Function - Square - Incandescent - Driver Side - Left Hand






California residents: click here


Video of Wesbar Combination Trailer Tail Light - Submersible - 7 Function - Incandescent - Driver Side


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Wesbar Submersible Trailer Light Review

Today we're going to be taking a look at the Wesbar Submersible Trailer Stop, Turn, and Tail Light. Left hand side part number is 2423006. Right hand part number is 24230056. Here you can see our Wesbar Submersible light. It's going to be a really nice, quality looking light. The left side has a yellow and brown wire off the back, our mounting studs here are going to create the ground for us using the supplied flange nuts. You'll see the clear lens on the bottom there, that's to help illuminate our license plate.

Our license plate would mount right down here, and that light's going to make it shine properly, so it will stay within compliance of all the laws. Now the lens itself, it's going to be about 4.5 inches wide and about the same tall. You can see the center section here, this is going to be the lens for our light. Something that I really like, this outer edge is a reflective surface, so as other lights hit it, it's going to reflect even when no power is going to it. Same for the side, we'll have our turn signal bulb in there, but a nice large reflective surface here as well again for nighttime. Looks like it's about 2 and 7/8 of an inch by about 2 and 1/8 there on the lens. From the very back of the light housing to the front, looks like we're going to have about 2.25 inches there.

From the center of the one mounting stud to the center of the other there, we're going to have about 2 inches. About 12 inch pigtail there on the back should help with making our connections. Now the right hand side is going to be almost identical to the left hand side. The only exception is we're not going to have the clear panel at the bottom, that's going to make this a 6-way light, and this a 7-way or 7-function light, that clear panel adding that 7th function, and our wire is going to be green. That's going to be for the right side of our trailer. Those are the only two variances there in our lights. Now these submersible lights are going to have a gasket.

It's going to go all the way around each our lenses and it's going to be sealed here in the rear. That's going to work out great for marine applications like our boat trailers or personal watercraft trailers, things like that, but it's also going to work out really well for those trailers we might take down gravel roads and stuff, so we're not going to be filling these housings up with any dust or any moisture. T The bulbs themselves are going to sit in a shock guard socket. It's really going to help to extend the life and give us one of those lights we don't always have to worry about. Coming out, plug it in, nothing works, we're always changing bulbs.

This is really going to help out with that issue and give us something that's going to be good and dependable. Installing the light is going to be very easy. We've got our pad here, we're going to put that between the light and our bracket. We'll take our two studs, those are going to go through the pre-drilled holes. The back of that light is going to be flush, so that's going to come right up against the flush bracket and then the back we're going to thread on our flange nuts. We'll want to tighten those down. All right, now we're ready to connect it to our trailer's already existing wiring. We've got our yellow and brown coming back. It doesn't really matter what color your trailer wires are, you just want a running light signal, and you want the blinker and the stop light signal. The running light signal, that needs to be connected to our brown wire coming out of the light. This is one of our de-cah 00:04:03 14-16 gauge heat shrink butt connectors. These are going to offer you superior moisture resistance. Keep anything from getting inside there once we get it shrank down, which we'll show you in just a second here. Strip back the wiring from my trailer. Do the same thing for our break and turn signal. Now I like to use a lighter, but you can also use a heat gun or a little mini torch or whatever you've got handy. Just want to provide some heat there. Those are going to shrink down, and once they squeeze there will be a little bit of gel that comes out at the end there. Make sure we have no issues with our connection whatsoever. We can tuck our wire away, zip tie it up, whatever the case is on your trailer. That's really all there is to installing them, really straightforward. The ground comes from our studs and those flange nuts as they tighten down. As you can see we've got a really nice secure fit there, and it's quiet. We've got that foam insulator in there, it's going to keep it from rattling around or giving us any kind of noises. We'll start with our break, and our blinker, and then our running lights. With everything working as it should that's going to complete our installation of the Wesbar Submersible Stop, Turn, and Tail Light. Part number 2423006 for the left hand and part number 24230056 for the right.


Customer Reviews

Wesbar Combination Trailer Tail Light - Submersible - 7 Function - Incandescent - Driver Side - 2423006

Average Customer Rating:  4.5 out of 5 stars   (28 Customer Reviews)

5-1/4" x 4-11/16" Square. Waterproof, incandescent trailer tail light serves 7 functions: stop, turn, tail, rear reflector, side reflector, side marker, and license plate light. Shock proof socket protects bulb. Stud mount. 2-Wire design.

- 2423006
by:

Just what the Doctor ordered! 718739



- 2423006
by:

Your company did what it said it would, in a very timely time..The lights were as I needed, would buy from you again.. The brake cylinder also fits my trailer and the price was right. 711701



- 2423006
by:

Great products, as advertised. 675519



- 2423006
by:

Easy find and easy order. Received taillights in perfect condition and in record time... Thanks..... 651882



- 2423006
by:

Good product! 550317



- 2423006
by:

These tail lights were easy to install, and work just as they should. One small item was missing from my order, but they were quick to send the item as soon as I notified them. I used them to replace the original tail lights on my boat trailer which had been destroyed by salt water corrosion. These tail lights are described as “submersible “, which I assumed meant that they were sealed to keep out water. But they were not sealed, so the product description needs to be clearer about the meaning of “submersible “. 540808


Comments

The lights are considered submersible because the inside circuitry is sealed to protect it from moisture. There will be drain holes in the lights casing but the inside elements will still be protected when submerged in water.

-- Heather A - 07/13/2018

40866

- 2423006
by:

Great 526120



- 2423006
by:

slipped right on to replace the old one. no complaints. price was right. 518477



- 2423006
by:

Actually having enough nuts to install the product would have been a big plus. 494100



- 2423006
by:

Item as described 448855



- 2423006
by:

Great place for online shopping. I like the descriptions and dimensions of the products. 411075



- 2423006
by:

just received my lights for my boat trailer yesterday and everything works great lights seem well made and very easy to install. Lights were well packed and shipping was fast very satisfied with the purchase. What is best of all is the customer service you dont find service like the folks at etrailer so hats off to George and the rest of the crew there at etrailer. 404249


Comments

Everything is still working fine and thank you George for the great customer service.

Mikey-D - 07/11/2018

40810
Comments

Everything still works fine no problems and thank you for your great customer service have told all my fishin buddies about etrailer and how good the experience was and the customer service so you will be getting customers from my end for sure thanks again to all of you guys at etrailer.

Mikey-D - 07/11/2018

40833

- 2423006
by:

The light came in a timely manner and works fine. I couldn't be more satisfied with etrailer or their product! 386679



- 2423006
by:

Cheap quality 381760



- 2423006
by:

all the lights i have ordered are great products. Thanks. 337648



- 2423006
by:

No problem installing, working fine. 337643



- 2423006
by:

The lights look good but I only got one set of the rubber cushions and nuts for the two lights. I plan to add them to a boat trailer but now I see that they are rated submersible but are not sealed which is not exactly what I was expecting. 304709


Comments

very happy with them.Thanks

Gene T - 10/11/2017

28995

- 2423006
by:

Everything is working very well. Very satisfied with your products and service. In fact, several times over the last couple years, I’ve recommended your site to friends and coworkers looking for trailer, towing, fastening gear. Keep up the good work there at Etrailer. 304269



- 2423006
by:

Everything was excellent.......and every time I've ordered from etrailer, the service has been excellent too. 296612



- 2423006
by:

Lights were easy to install and fit without any modifications. 284819



- 2423006
by:

great prompt service...exactly what I needed to replace my trailer lights. 246421



- 2423006
by:

Product was exactly what I thought I was ordering. Fit perfectly and had no problems installing the item. 230891


Comments

No problems, working just the way it should

Paul R - 10/26/2016

21636

- 2423006
by:

I have not used the lights in the water yet so I am unable to give a proper review of the item. 209188



- 2423006
by:

Based on my experience buying from etrailer for the second or third time, each time they shipped the correct part, to the correct address as discussed on the phone. The quality of the product each time was exactly as explained on their web site. I would recommend them to others. Roger 207135



- 2423006
by:

The trailer taillight was exactly what I requested. Fast service 200814



- 2423006
by:

Very fast shipping, product was well de scribed 192761



- 2423006
by:

Two days to my door. Easy Installation. Work Perfect 145395


Comments

They are still working great! Thanks for asking.

Tony B - 08/13/2015

14227

- 2423006
by:

Just as expected 141440


29
29

Ask the Experts about this Wesbar Trailer Lights

Do you have a question about this Trailer Light?


  • Availability of Light Kit for Boat Trailer Guide On Posts
  • Yes we do! For the PVC posts at the rear of your trailer I recommend taking a look at the CE Smith LED Light Kit # CE27656A. These are designed for PVC posts that feature a 2-3/8 inch outer diameter and the included LED lights will simply mount to the top of them for a bright red and amber glow. The wiring coming from each light just needs to be connected to your trailer wiring and you are good to go. I have attached an image of these installed just so you can see how they look in...
    view full answer...

  • Recommendation on Lighted Guide Poles Wired As Stoplights
  • The CE Smith Post-Style Guide-Ons # CE27740 are lighted poles to help guide your boat on to the trailer. CE Smith does have Light Mounting Brackets for Post-Style Boat Trailer Guide-Ons # CE27650A were you could mount a set of stop lights like # 2423056 for right hand side and # 2423006 for the left hand side. These lights can be wired into the stop lights of the trailer. These lights are submersible and contain gaskets to create a weather tight seal. The CE Smith # CE27740 are the...
    view full answer...

  • Is Peterson Square 6-Function Trailer Tail Light # 432200 Submersible in Water
  • The Peterson Square 6-Function Trailer Tail Light # 432200 that you referenced is NOT submersible. For a submersible unit like this you can use one of the square lights shown on the included link. Wesbar offers a submersible stud-mount incandescent light similar to the Peterson; part # 2423056 is the righthand light and part # 2423006 is the left.
    view full answer...

  • Matching Light to Go with Wesbar Stop/Turn/Tail/ # 2423056
  • The part number you referenced, # 2423056, is a trailer tail light. This is the right hand side (passengers side). The matching left hand side is # 2423006. The left hand side has a light at the bottom to illuminate a license plate.
    view full answer...

  • Trailer Lights Will Not Work When Truck Lights are On
  • This sounds like a ground issue or a possible overload issue. When lights start behaving strangely it is almost always a ground problem. Make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free bare metal surfaces. If there is anything between a light ground and the metal...
    view full answer...

  • Square Trailer Tail Lights with a Plug Connector for a Shorelander Trailer
  • All of the similar trailer tail lights like # 2423056 either have blunt cut wires or you just insert the wiring to the backs of the lights. None have a plug. What you could do is use light # 2423056 (and # 2423006 for the left side) and splice the plug from your old lights to them. You would need to make sure the connection is water tight by using some heat shrink tubing such as # DW05744-5.
    view full answer...


Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Jacob T
Video by:
Kathleen M
Written by:
Laura H
Installed by:
Randy B
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.