Wesbar Combination Tail Light for Trailers Over 80" Wide - 7 Function - Passenger Side

Ask the Experts about this Wesbar Trailer Lights

• Are the Bulbs or Just the Capsule Replaceable in the Wesbar Trailer Tail Light # 106411
  I went out to the warehouse and pulled a Wesbar trailer light, # 106411, to examine it more closely. After taking it apart I found that you can replace just the bulbs inside the capsule. The same goes for # 106410. The larger bulb is an 1157 bulb, # A1157B, and there can also be a smaller bulb labeled as C193. I made a short video showing the light taken apart for you.
  view full answer...
• Replacement Trailer Taillight Lens Recommendation for a Wesbar Taillight Part Number 006554
  Yes, the Wesbar taillight assembly part number 006554 that you referenced is the same as the part # 403076 that you also mentioned so the correct replacement lenses would be the part # 053522033360.
  view full answer...
• How To Install Wesbar Waterproof Low Profile Tail Light Wiring
  On the Wesbar Waterproof Low Profile Tail Light # 106411, the Brown wire is used for the running and tail light function. Since you said you the trailer has a Brown wire you will want to confirm it is the running light wire and splice the brown wire on the # 106411 to that. The green wire should be spliced to the brake/turn trailer wire.
  view full answer...
• Availability of Replacement Lenses for Wesbar # 106411 and # 106410 Tail Lights
  We do indeed have replacement front and side lenses for the Wesbar # 106411 and # 106410 lamps, the replacements are part # 053522033360. Four lenses and the necessary attachment screws are included. The lens kit can be ordered online or by phoning our Customer Service folks at 800-298-8924.
  view full answer...
• Wiring New Left Tail Light with Yellow, Brown, and White Wire to Boat Trailer
  On your new left side tail light assembly the yellow wire is likely for left turn/stop lights and the brown wire is for running lights. You have already identified the white wire as ground. Then on the trailer side it appears that you have some non-standard wire colors so I'm not able to confidently identify them. Because of this the best option is just going to be to test them for function, either by applying 12V power to each wire directly to see what lights they activate, or by testing...
  view full answer...
• Do Trailer Lights Have Light for License Plate
  We sell trailer taillight kits that have a driver and passenger side and the one of them will have a clear lens on the bottom for illuminating a license plate. The part # TLL16RK comes with two lights, one with a license plate light, a plate bracket, and wiring which would work well. The capsule you found are no longer available unfortunately.
  view full answer...
• 4-Way to 5-Way Adapter for a 1998 Chevy C/K Series Pickup Truck
  Yes, you can use a 4-Way to 5-Way adapter, # 20036, to use with your boat trailer. It will install basically exactly how you have described with that extra wire going to the reverse light circuit on the vehicle. I have linked a video showing an example installation. Of course it will be easier to install on a truck than on the vehicle in the video since you don't have to worry about that rear hatch.
  view full answer...
• Replacement Right Tail Light for 2002 Four Winns Trailer with Horizon Boat
  The dimensions will be the determiner of the correct replacement fixture for your 2002 Four Winns Boat Trailer. I can tell from a little research it is a rectangular light, obviously submersible, so here are some options. The Wesbar Submersible Low Profile Trailer Tail Light - Passenger Side # 403076 is 8" long x 2-13/16" tall x 2-13/16" deep with mounting slots 2 inches on center. The Wesbar Waterproof Over 80" Low Profile Tail Light - RH # 106411 is 8 inches long x 3 inches tall...
  view full answer...
• Replacement 8 x 3 Inch Rectangular Trailer Tail Light
  Based on the picture you sent me, you have an 8 by 3 inch rectangular Wesbar light. If your trailer is 80 inches or more wide, by law, it requires more lighting than smaller trailers. If yours is 80 inches or wider you will need either # 106410 for the left side or # 106411 for the right. If your trailer isn't 80 inches wide then your left light will be # 403026 and the right is # 403076. Both styles are submersible and have a replaceable capsule protecting the bulb. This also...
  view full answer...
• Recommended Rectangular Trailer Lights for my Snowmobile Trailer
  At this time we don't have a tail light that measures 9-inches x 2-1/2 inches. The best match we currently stock is the Wesbar tail light right hand side # 106411. The left hand side tail light is # 106410. These are surface mounted tail lights and measures 8-1/16 inches in length x 2-7/8 inches in width. Additional close matches are Optronics drivers side # RVSTL61 and passenger side # RVSTL60. They are surface mount and measure 8-11/16 inches in length x 3-3/16 inches in width. I...
  view full answer...
• Where Circuits Wire to the Wesbar Submersible Low Profile Trailer Tail Light # 403026
  You are correct, the brown/green wire goes to the running light circuit of the taillight # 40306 that you install on the right side of the trailer and the brown/yellow wire from the trailer wiring goes to the running light circuit on the left side of the trailer. The running light circuit of the # 40306 is the brown wire. So both the above mentioned wires will connect to the brown wire. The red wire is for the stop/turn function. Most likely this will be a solid green wire for the right...
  view full answer...
• Will Any Water Get Inside the Wesbar Waterproof Over 80 Inch Low Profile Tail Lights When Submerged
  The clear bubble capsule inside the Wesbar Waterproof Over 80 Inch Low Profile Tail Light # 106410 and # 106411 has a gasket to keep the light capsule sealed. This O-ring at the back of the light capsule will keep water out and away from the bulbs, making the light waterproof. The tail light housing is not sealed, so water will still get inside and drain out of the housing, but the clear bubble capsule inside will protect the light bulbs from water when the light assembly is submerged. This...
  view full answer...
• What are the Dimensions of Wesbar Trailer Tail Light 106410
  I went out to the warehouse and pulled a Wesbar trailer tail light # 106410 to measure it. It is 8 inches across, 2-3/4 inches deep, and 3 inches tall so it is very close to the dimensions of your old tail light. This light has mounting slots in the back that are 2 inches apart on center and the mounting hardware is included. The matching right hand side light is # 106411. Optronics lights # ST16RB and # ST17RB do match the dimensions you need.
  view full answer...
• Can I Use a Passenger Side Tail Light in Place Of The Needed Driver Side Tail Light
  Since you need a driver side tail light, Wesbar does make a Combination Tail Light for the Driver Side that is part # 106410 and I recommend using that tail light vs. trying the passenger side tail light # 106411 in its place. The license plate light is only on the driver's side and the side marker won't work properly if the light is on the wrong side. As a result, the light wouldn't be facing the correct direction. They are not direct replacements for each other: # 106411 serves...
  view full answer...