bing tracking image
  1. Trailer Lights
  2. Peterson
  3. Clearance Lights
  4. Round
  5. LED Light
  6. Red
Peterson LED Mini Clearance and Side Marker Trailer Light w/ Grommet - 1 Diode - Round - Red Lens

Peterson LED Mini Clearance and Side Marker Trailer Light w/ Grommet - 1 Diode - Round - Red Lens

Item # M181R
Retail:$23.93
Our Price: $7.55
Trailer Lights
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
3/4" Diameter round. Mini LED trailer light functions as both a clearance light and a side marker light. Recessed mount with included grommet. 2-Wire pigtail. PC rated. Great Prices for the best trailer lights from Peterson. Peterson LED Mini Clearance and Side Marker Trailer Light w/ Grommet - 1 Diode - Round - Red Lens part number M181R can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (9)
  • Q & A (0)
  • Videos (1)
  • Photos

Peterson Trailer Lights - M181R

  • Clearance Lights
  • Round
  • LED Light
  • Red
  • 3/4 Inch Diameter
  • Recessed Mount
  • Rear Clearance
  • Side Marker
  • Peterson

3/4" Diameter round. Mini LED trailer light functions as both a clearance light and a side marker light. Recessed mount with included grommet. 2-Wire pigtail. PC rated.


Features:

  • Mini LED trailer light functions as a clearance or side marker light when properly mounted
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red lens over white LED
  • Compatible with 12V DC systems
  • Recessed mount with included grommet
    • Requires a 3/4" diameter hole
  • 2-Wire design includes power lead and ground wire
  • DOT compliant
  • PC rated
  • Made in the USA


Specs:

  • Dimensions: 3/4" diameter x 13/16" long
  • Diodes: 1
  • Power draw at 12V: 0.04 amps
  • Wire length: 8"
  • 10-Year limited warranty


Peterson 181R LED Clearance Marker Light DimensionsPeterson 181R LED Clearance Marker Light Dimensions

PC-Rated Lights

Diagram of light spread for PC rated light

A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.


Recessed-Mount Light

Recessed Grommet Mount Trailer Light Installation Diagram

Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.



M181R Peterson LED Mini Clearance and Side Marker Trailer Light w/ Grommet - 1 Diode - Round - Red Lens - PC Rated




California residents: click here


Video of Peterson LED Mini Clearance and Side Marker Trailer Light w/ Grommet - 1 Diode - Round - Red Lens

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Peterson Trailer Lights - Clearance Lights - M181R

Today we're gonna take a look at the Peterson LED clearance and side marker light with grommet. This is gonna have a single diode design and a red lens. Now this is gonna offer a clearance and brake light on our trailer. It is gonna be a very small light, so it's gonna be more of an accent than an actual trailer marker, or a stop signal. But we are gonna have that red lens. And this is going to be an LED light so it's gonna make a great replacement for any incandescent lights on your trailer.

We don't have to worry about any broken filaments, no bulbs to change with this. It's gonna be a very long-lasting light. It can last up to 50 times longer than your typical incandescent bulb. It's also going to be more efficient, so we have less power draw with this than our incandescent. And as you can see at the back, it's gonna be sealed with an epoxy material, so we don't have to worry about any water or dust getting in there and causing any corrosion or shorts.Now it does have a recessed mount with the black PVC grommet, as you can see.

You might need to drill a hole to get this actually installed, and that will need to be three-quarters-of-an-inch in diameter. We have our two wire pigtail at the back. We're gonna have black for power, white for ground. This is going to be DoT compliant and PC rated with top-mount positioning. Again, our pigtail at the back is going to measure about eight inches.

So you can see. And then we are gonna have that single diode design. Our light is gonna sit back about 9/16ths of an inch, and it is going to be three-quarters in diameter.The LED does have a limited lifetime warranty from Peterson. And I'll go ahead and hook this up to power and ground so you can see just how bright it's gonna be. Our black wire goes to power, white goes to ground.

As you can see a small but mighty light that's gonna give us a really nice looking accent on our trailer, side marker for our trailer. Go ahead and turn the lights out in the studio here so you can get a better idea of just how bright that's going to be. So it gives us a nice good light. Would look really cool if you grab a whole bunch of these, get them wired up all along your trailer. And gonna last a really long time. Especially compared to those incandescent bulbs.And that's gonna do it for our look at the Peterson LED clearance and side marker light with grommet, with a red lens.


Customer Reviews

Peterson LED Mini Clearance and Side Marker Trailer Light w/ Grommet - 1 Diode - Round - Red Lens - M181R

Average Customer Rating:  4.9 out of 5 stars   (9 Customer Reviews)

3/4" Diameter round. Mini LED trailer light functions as both a clearance light and a side marker light. Recessed mount with included grommet. 2-Wire pigtail. PC rated.

by:

Have nat installed the lights yet, the service was great. The only thing I might change is the length of the pigtail. Idally they should be 15"-18".

Thanks for asking,

Pat



by:

Works as expected. Made in USA



by:

Exact replacement I was looking for. Great price and very, very quick delivery! e-trailer is becoming my go-to for all my RV parts.



by:

Worked exactly as advertised.



by:

Just what I wanted, service was great. Keep it up.



by:



by:



by:



by:


9
9

See what our Experts say about this Peterson Trailer Lights


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Installed by:
Kathleen M
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T
Employee Justice A
Written by:
Justice A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.