bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Oval
  5. LED Light
  6. Red
GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Red Lens - Plug-In

GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Red Lens - Plug-In

Item # OPT54WR
Retail:$40.83
Our Price: $23.09
You Save: 43%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.38 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Molded-in connector accepts industry-standard 3-prong plug. Great Prices for the best trailer lights from Optronics. GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Red Lens - Plug-In part number OPT54WR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1332)
  • Q & A (0)
  • Videos (1)
  • Photos

Optronics Trailer Lights - OPT54WR

  • Tail Lights
  • Oval
  • LED Light
  • Red
  • 7-1/2L x 3-5/16W Inch
  • Surface Mount
  • Stop/Turn/Tail
  • Submersible Lights
  • Optronics

7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Molded-in connector accepts industry-standard 3-prong plug.


Features:

  • Oval trailer tail light serves 3 functions
    • Turn signal light
    • Tail light
    • Brake light
  • GloLight lens creates a solid light pattern with a smooth appearance
    • Outer band of LEDs functions as tail light
    • Center red LEDs act as turn signal and brake light
  • Sonically sealed, waterproof housing and lens unit is submersible
  • Durable surface-mount technology (SMT) construction of LED circuit board
    • Better withstands shock and vibration
    • Allows improved heat distribution and thinner construction
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red lens over white LEDs
  • Polycarbonate housing and acrylic lens
  • Compatible with 12V DC systems
  • Surface mount with built-in flange - hardware not included
    • Light extends 3/4" out from trailer
  • Molded-in connector accepts industry-standard 3-prong plug
  • DOT compliant
    • Meets FMVSS 108 and CMVSS requirements for automotive lighting


Specs:

  • Quantity: 1 combination tail light
  • Overall dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" deep
    • Light face dimensions: 6-7/16" wide x 2-5/16" tall x 15/16" deep
  • Diodes: 22
  • Power draw at 12.8 volts:
    • Tail light: 0.59 amps
    • Stop/turn light: 0.569 amps
  • Lifetime warranty on LEDs


Optronics STL178RB GloLight Trailer Tail Light - Stop, Tail, Turn, Oval - Clear Lens Dimensional Diagram

Innovative GloLight Design

Optronics Glow lights lit around the edge

This red LED light serves as a trailer tail light with stop, turn, and tail functions. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.


Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


LEDs vs. Incandescent Lights

The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.


Surface Mount Technology

The surface-mount technology used to construct these lights protects the LEDs from shock and vibration better than through-hole technology because the diodes are soldered directly to the surface of a printed circuit board instead of attached with wires that run through holes in the board. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.


Surface-Mount Light

Surface Mount Trailer Light Installation Diagram

Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.



STL178R3B Optronics Glow Light Trailer Combination Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - 6-1/2" Oval - Red Lens - 3-Wire Molded Plug





Video of GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Red Lens - Plug-In

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Optronics Trailer Lights - Submersible 3 Function Red LED Trailer Tail Light - OPT54WR

Hi everybody. My name is Andy with etrailer.com. And today, we're taking a look at this GloLight submersible, three function, red lens, LED trailer tail light. Now, this oval, three function, waterproof light is gonna act as your brake light, your tail light, and your turn light. And this GloLight lens creates a solid panel of light. As you can see, this is a surface mount light, and it has a built-in flange.

And let me go ahead and show you what this looks like lit up. I have this connected to 12 volt power. And so, right now you can see that this has this outer band of LEDs and that's gonna function as your tail light. And then when you activate your brake light, the center red LEDs are going to activate. So, that's gonna be your brake light there in the middle, and that's also going to be your turn signal as well.

So, it's a really nice look to this light. I've kept my studio lights on. Let me go ahead and turn them off, and then you can see just how bright that is. So again, this outer band is going to be your tail light when it's turned on. And then the center red LEDs there are going to act as your brake light and your turn signal.

And you can see just how bright that is. And then let me turn my lights on, and we'll go to a wide view here. And I'll show you just how bright this is from that range as well with the studio lights on. So, it's a nice, bright light, and a very unique look to the way that this lights up. So, let me turn the power off and disconnect my power here, so we can talk a little bit more about this and take a little bit of a closer look.

Now, these LEDs are going to make a great replacement for the incandescent lights. They last up to 50 times longer. They're gonna be more efficient. They provide a brighter light with less power output. You're gonna have no bulbs to replace, no brittle filaments. And this is a red acrylic lens over white LEDs. Now, this polycarbonate, sonically sealed waterproof housing and lens unit is going to be submersible. And the surface mount technology used to construct these lights protects the LEDs from shock and vibration better than the through-hole technology because the diodes are soldered directly to the surface of a printed circuit board instead of attached with wires that run through holes in the board. So, the result's gonna be a circuit board that's smaller yet provides more routing area, and that offers superior performance, reliability, and durability. This also allows for improved heat distribution and thinner construction. Now, this is, this is compatible with 12 volt DC systems. Again, this has that surface mount with the built-in flange. It is important to note that the installation hardware is not included. And this has the molded-in connector that accepts industry standard three-prong plug. The white wire on this light is going to be ground. The black wire is gonna be your tail light. And then the red wire is gonna be your stop and turn. Now, this is DOT compliant, and this meets FMVSS 108 and CMDSS requirements for automotive lighting. Let me go ahead and give you some measurements here. Let me start by giving you overall measurements. The overall width of this light, let me move that cable there just so you can see a little more clearly. The overall width, we're gonna be sitting right at 7 1/2 inches overall width. And the height, we're gonna be sitting right at 3 1/4 inches tall. This is about an inch deep as you can see there. Now, the light face dimensions, just looking at this, at this lens here, we're gonna be sitting right at about 6 3/8 inches wide by about 2 1/8 inches tall. And this is going to be about 3/4 of an inch deep. Now, the distance between the mounting holes from center to center of those mounting holes, let me get those lined up here. Gonna to be sitting right at seven inches on those mounting holes. Seven inches on those mounting holes. And then looking at the top and the bottom mounting holes again, let me get this lined up here for you a little bit better. We're gonna be sitting in right at 2 3/4 in between the top and the bottom. There we go, 2 3/4. Now, there are 22 diodes in this light. Has a power draw of 12.8 volts. The tail light is .59 amps. The stop turn light, .569 amps. And this does have a lifetime warranty on the LEDs, and you will get one of these combination tail lights. Well, that's going to conclude our look today at this GloLight submersible, three function, red lens, LED trailer tail light. Again, my name is Andy. Thank you for joining me..

Customer Satisfaction Score:


Customer Reviews

GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Red Lens - Plug-In - OPT54WR

Average Customer Rating:  4.8 out of 5 stars   (1331 Customer Reviews)

7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Molded-in connector accepts industry-standard 3-prong plug.

by:



by:

Amazing upgrade from the old metal lights even with led replacement bulb in the metal cans. One video is the halo tail lights installed, the other is chasing a ground issue with the old lights for comparison.



by:

etrailer does provide a wide range of products with different price points so the customer has a lot of choices to make the decision that is right for her\him. You also offer good online support documentation and your technical staff is also very helpful in helping the customer make the right choices.
Unfortunately, you left me with a very bad experience. I ordered a full set of lighting & wiring to redo our quad trailer from the 7-pin plug to reverse lights. A large order. I erroneously ordered 2 reverse\turn single lights, which is on me, so I expected a restocking fee (a little excessive, but that's the inventory business). I had to return the 2 wrong lights and order the correct one. I returned both lights, but etrailer said they only received one, which I was 99% sure I returned both. You had no interest or showed any flexibility considering maybe I was correct. This is a one year review you have asked me to submit and the light you claimed I did not return, still has not shown up in my garage. I liked dealing with you on numerous occasions, but I have taken my business elsewhere. That was a sad experience.



by:

These lights are totally amazing, very bright and small footprint, just need a 3/4 drill bit and they fit like a glove, will buy more for other boat trailer upgrades.



by:

a little loose in the side marker bracket, but easily solved with a wiretie.



by:

The Igor worked great. I had a heck of a time trying to order lights for the trailer - either not getting the ones I intended getting or mismatched lights. But you came through like me a champ. Thanks.



by:

I have had these installed for a year now on my 14ft utility trailer. I love these lights! They are strong, durable, bright, and look so super cool at night! Most recently, last month, I trailered 1500 miles and through the mountains in West Virginia. They held up through curves and bumps and rainstorms and even dime-sized hail! I would recommend these to anyone who needs this style of light! I wish I had brackets enough to put two on each side... just so it would look extra bada**!



by:

Added Glolight LED's to my trailer. Much brighter than the factory originals. Makes launching pre sunrise much easier. You can see where you are backing up.



by:

Perfect for replacing the older lights on the trailer



by:

Excellent replacement. Looks like original ones and simple to install. Tried to replace bulbs in old one's they would not hold contact and bulbs were almost as much as the replacement I saved time and anguish by just replacing the old ones



by:

Excellent hi vis lighting for my traile r.



by:

Very durable! After a year of use they as. Right as the day I installed them. Speaking of which, there was no surprises with this either.



by:

Was not happy with the packaging. GloLights were not packaged, just placed loose in the box with other items. One piece of brown paper in the box for a void filler. Lights were scratched up when arrived.



by:

Fast shipping and great product! Exact replacement off a 2017 Skeeter fx21 bass boat



by:

Great light and bright....



by:

Small led, nice light



by:

got these because they came up as replacement for the number of the old light that came out, these are ok but not really bright and I would have gone with a brighter unit even if I had to cut the metal out a bit to make it fit



by:

Upgrading our 1998 Coleman Grandview, the old incandescent just seemed too dim.
Nice light, only suggestion would be to list some wiring options, was a bit confusing going from the old Bargman to the new LED.
But I read through the Bargman page here and got squared away.

Pic is LED before anchoring compared to the stock on the right. BIG improvement.



by:

This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.



by:

These are great light. They look so good i put them in my restomod. I didnt like the factory light i replaced all lights with LEDs. These were a perfect fit!



by:

Even though it was a small order, the replacement light worked perfectly!!! Great price and good quality product! Thanks



by:

These lights were added to my cargo trailer that I pull behind my motorcycle. These help to make sure that people see me when I am on the road. The lights were easy to install with the grommets and pigtails that I ordered at the same time. All the products worked together well and made the project easy to do. Love these lights and will buy more if needed.



by:

These are some pretty sweet lights. Very bright and attention getting. I am constantly getting compliments on them.
The High Points-
- I bought the standard 3 prong style, works just fine with a Truck-Lite plug and with a no name one I had lying around.
- When not using driving lights both the outer and inner lights flash for turn signal. Don't remember reading about that, but it's pretty sweet(at least for the people behind me!).
- All 4 arrived in excellent shape and with all lights working.

Now, for the only negative that I can come up with-
- 2 of the lights have what I think is a sliver of white plastic stuck between the outer circle and the cover. I'm guessing it's from pressing the halves together. They can't be seen until you're very close to them, but for a $28 light it's a bit disappointing for that to get past QA.
Regardless, I highly recommend these, they are very distinctive and so far I haven't seen anyone else with them. Can't wait to be able to afford 4 more!



by:

Great Light! Put two on the back of a toyhauler for backing up.
You will need the grommet and pigtail to do it right.
I had to cut two oval holes for mounting in trailer frame. Take your time with the layout and get the right sized hole saw, makes installation pretty easy.



by:

Perfect fit and bright


25
1276
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Replacement Trailer Tail Light With a 3-Prong Plug In Connector
    I believe you are looking for the GloLight LED Trailer Tail Light # OPT54WR. This has the same 3 pin connector as in your image. The overall dimensions of this light are 7-1/2" wide by 3-5/16" tall and 1-1/8" deep. If you have a different size light please let me know. We currently do not have any pigtails with this type of connector. If you want to change out to better connectors we do have the Pigtail # A45PMB which uses a common weathertight plug. These and the male end are also commonly...
    view full answer...

Do you have a question about this Trailer Light?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Andy C
Installed by:
Andy C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924