1. Trailer Lights
  2. Optronics
  3. Clearance Lights
  4. Rectangle
  5. LED Light
  6. Amber
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - Submersible - 3 Diodes - Amber Lens

LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - Submersible - 3 Diodes - Amber Lens

Item # MCL82AB
lowest price pledge
Our Price: $13.70
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.09 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
4-7/16" x 1-5/8" Rectangle. Waterproof trailer light serves as either a side marker light or a clearance light. Amber lens with reflex reflector. Surface mount on 4" centers - hardware not included. 2-Wire pigtail. P2 rated. Lowest Prices for the best trailer lights from Optronics. LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - Submersible - 3 Diodes - Amber Lens part number MCL82AB can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (12)
  • Q & A (3)
  • Videos (1)
  • Photos
  • Why etrailer?

Optronics Trailer Lights - MCL82AB

  • Clearance Lights
  • Rectangle
  • LED Light
  • Amber
  • 4-1/2L x 1-1/2W Inch
  • Surface Mount
  • Side Marker
  • Submersible Lights
  • Optronics

4-7/16" x 1-5/8" Rectangle. Waterproof trailer light serves as either a side marker light or a clearance light. Amber lens with reflex reflector. Surface mount on 4" centers - hardware not included. 2-Wire pigtail. P2 rated.


Features:

  • Rectangular trailer light serves as either a side marker light or a clearance light
  • Sonically sealed, waterproof housing and lens unit is submersible
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Amber lens with reflex reflector
  • Polycarbonate lens and housing
  • Mounts on surface of trailer
    • Foam mounting gasket creates a weathertight seal
    • Hardware not included
  • 2-Wire pigtail with power lead and ground wire
  • DOT compliant
  • P2 rated


Specs:

  • Overall dimensions: 4-7/16" long x 1-5/8" tall x 7/8" deep
  • Mounting hole dimensions:
    • Center to center: 4"
    • Diameter: 3/16"
  • Diodes: 3
  • Power draw at 12.8 volts: 0.05 amps
  • Quantity: 1 clearance/marker light
  • Lifetime warranty on LEDs


Optronics MCL82 Series Side Marker Light Diagram

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.


P2-Rated Lights

Diagram of light spread for P2 rated light

A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.


Surface-Mount Light

Surface mount light

Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.



MCL82AB Optronics Rectangular LED Side Marker/Clearance Trailer Taillight with Reflex Reflector - P2 Rated - Amber




California residents: click here


Video of LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - Submersible - 3 Diodes - Amber Lens

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Optronics Trailer Lights - Clearance Lights - MCL82AB Review

Speaker 1: Today we're taking a look at the Optronix LED trailer clearance or side marker light. This rectangular light serves as either a side marker light or a clearance light for your trailer. It is sonically sealed, so it's waterproof when it comes to the housing and lens unit and it is submersible. The LEDs make great replacements for incandescent lights. LEDs last longer, they burn brighter and they're much more efficient. With LEDs you don't have to worry about changing bulbs and you don't have to worry about brittle filaments.

This light features a nice amber lens with the reflex reflexor built into it. And it's a polycarbonate construction, so it's very strong and durable. It's a surface mount installation so it mounts directly on the surface of your trailer. It does come with a foam gasket that can be used to create a weather tight seal.Mounting hardware for this unit's not included. I do want to point out that you will need a one and 3/8th inch diameter hole at the installation surface, that's for this area right here to sit in in order for the light to sit flush on your actual installation surface.

The two wire design provides your ground wire and your power wire. It is SAE and Department of Transportation compliant and it is a PT rated light.When it comes to the overall dimensions of the unit, the overall length measure about four and 7/16ths of an inch long. Top to bottom is about one and 5/87ths inches. And then the overall depth from very front to very back is about 7/8ths of an inch deep. The depth from the installation surface is about 3/8ths of an inch deep.The mount holes are separated on center by four inches and they have a diameter of 3/16ths of an inch.

And this light contains a total of three LEDs or three diodes. We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it. And then we'll also be able to turn off our overhead lights so you can see it in a low light setting.So here you can see the light sends out a nice, consistent signal. It's a really nice design, again, three diodes, so the multi diode design really helps optimize the light output. Power draw at 12.8 volts, at 0.05 amps and Optronix puts a lifetime warranty on their LEDs.That's going to do it for today's look at the Optronix LED trailer clearance or side marker light..


Customer Reviews

LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - Submersible - 3 Diodes - Amber Lens - MCL82AB

Average Customer Rating:  4.9 out of 5 stars   (12 Customer Reviews)

4-7/16" x 1-5/8" Rectangle. Waterproof trailer light serves as either a side marker light or a clearance light. Amber lens with reflex reflector. Surface mount on 4" centers - hardware not included. 2-Wire pigtail. P2 rated.

- MCL82AB
by:

The lights for our boat trailer arrived timely and they fit perfectly on the trailer. We have not put the boat into the water yet, so we are not sure about the "waterproof" of these new lights. We are hopeful they will be waterproof and last many years.


Comments
Our Boat trailer has been in the water a lot over the last year and the new trailer lights are working great- no water in the lights.
Tina - 09/03/2020


- MCL82AB
by:

The LED side markers are bright and we’re easy to install.



- MCL82AB
by:

Exact Fit!


Comments
LED! Long Life, Bright Perfect!
Kenneth W - 06/02/2020


- MCL82AB
by:

Lights worked perfectly, direct replacement for lights on 2001 Patriot Thunder Motorhome.



- MCL82AB
by:

The lights are working great. I had to modify the coach but that isn't the light's fault. These are sturdy reliable LED lights. I recommend them and I'm about to replace the rear red lamps with the corresponding red model.



- MCL82AB
by:

It's been a year, several launches, and these tail lights are still working great. They're nice and bright LED...



- MCL82AB
by:

These lights were exactly as advertised. They look great on the trailer and they're still working good after a year. I bought a few extra just to have as matching spares.



- MCL82AB
by:

just what i wanted !!!! parts look & FIT GOOD -VERY HAPPY & WILL ORDER MORE STUFF plus YOUR SHIPPING IS GREAT & FAST SOOO MUCH BETTER THAT [on-line giants] !!!


Comments
GREAT !sold trailer BUT wish i had the same lites on my newer trailer
mike - 08/03/2020


- MCL82AB
by:

Items arrived faster than I expected and were exactly as promised. The staff is very knowledgeable and friendly.


Comments
They are working great. I tell everyone I know about etrailer. Great company.
Roger - 05/04/2019



- MCL82AB
by:



- MCL82AB
by:



- MCL82AB
by:


12
12

Ask the Experts about this Optronics Trailer Lights

  • Replacement Amber and Red 4-1/2 x 1-1/2 Clearance Lights
    We do have 4-1/2" Long x 1-1/2" Wide clearance lights available: Amber (Orange) - # MCL82AB Red - # MCL82RB Just add these to your online cart and then change the quantity to match what you're needing!
    view full answer...
    Image 1 for
  • Red & Amber Side Marker Lights and Clearance Lights. LED and Easy Replacement
    We have some excellent replacements for your clearance lights. For amber/yellow I recommend the Optronics # MCL82AB LED clearance light, and for red I recommend the Optronics # MCL82RB light. These two options are identical excepting color. They have LED lights that are bright and will last far longer than traditional incandescent lights. The screw mounting holes are exactly 4” apart like you current ones, so this will be a quick and easy swap out. The other measurements are with in...
    view full answer...
    Image 1 for
  • Recommended Replacement Marker Lights for 1998 Trailstar Boat Trailer
    Thank you for the light measurements on your 1998 Trailstar Boat Trailer. For the left and right front marker lights, I recommend the # MCL82AB LED Trailer Clearance or Side Marker Light w/ Reflex Reflector. These measure 4-7/16" long x 1-5/8" tall. This sonically sealed, waterproof housing and lens unit is submersible. For the left and right rear marker lights, I recommend the # MCL95AB Optronics LED Clearance or Side Marker Light. This light is 2-1/8" long x 1-1/8" wide. It is also...
    view full answer...

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.