Optronics LED Trailer Clearance or Side Marker Light - Weathertight Connection - 2 Diodes - Red Lens

Optronics Trailer Lights - MCL527RMB

2-1/2" Diameter round. Waterproof, LED trailer light serves as a clearance or side marker light. Durable polycarbonate housing and lens. Recessed mount with grommet (not included). Weathertight connection accepts weathertight plug. P2 rated.

Features:

• LED trailer light serves as a clearance or side marker light when properly mounted
• Sonically sealed, housing and lens unit are submersible
• LEDs make great replacements for incandescent lights
  • Lasts 50 times longer
  • More efficient - provides brighter light with less power output
  • No bulbs to replace - no brittle filaments
• Durable polycarbonate housing and lens
• Red lens over white LEDs
• Compatible with 12V DC systems
• Recessed mount with grommet (A55GB - sold separately)
• Weathertight connection accepts 2-wire pigtail with weathertight plug (AL42PB - sold separately)
• DOT compliant
• P2 rated

Specs:

• Dimensions: 2-1/2" diameter x 1-3/16" thick
• Diodes: 2
• Power draw at 12.8V: 0.034 amps
• Lifetime warranty on LEDs

Sonically Sealed, Waterproof Trailer Light

The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.

P2-Rated Lights

A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.

Recessed-Mount Light

Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.

MCL527RMB Optronics Fleet Count LED Trailer Clearance or Side Marker Light - Weathertight Connection - 2 Diodes - Round - Red Lens - P2 Rated - Recessed Mount