Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3-3/4" x 2-1/4" Rectangle. Incandescent trailer light functions as a clearance or side marker light when properly mounted. Durable ABS housing. Flush mount to trailer - hardware included. 2-Wire design. P2 rated. (1) 194 bulb.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Uni Bond # ML2030A-CB
Grote # 47053
Peterson # M126A
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronics Flush Mount Trailer Clearance or Side Marker Light with chrome trim. This is an amber, rectangular light. Again, it's going to feature the chrome trim that goes around the perimeter. It gives the unit a very clean, finished look. This does feature a replaceable lens and bulb. It's going to use bulb number 194, and the bulb sits in a removable socket that's connected to the wiring harness. Now this is going to flush mount.
It's got two mount holes located here on the back. Mounting hardware is included. If we take a measurement, the distance we have between those mount holes on center, we can see that that's going to measure right on 2", and then the installation area does require a 1 1/4" mounting hole for the bulb socket area and the wiring to pass through. This is a two wire design. It's going to come with your power lead, and your ground wire.
The unit is Department of Transportation and SAE compliant. Taking a look at the measurements real quick, starting with the overall length, edge to edge, that's going to give us a measurement of about 3 3/4". Going this direction, edge to edge, that's going to give us a measurement of right around 2 1/4". Then the depth of the unit is only about 1/2" deep. That's just measuring this area up here. When it comes to the power draw at 12.8 volts, we're looking at 0.4 amps. We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it, and then we'll also be able to turn off our overhead lights so you can see it in a low light condition.
This is an incandescent bulb system, and it's going to contain a one bulb design. You can see there that it sends off a really nice, consistent signal output. Again, it's going to have the amber lens, allows plenty of light to come through, and again that a chrome trim really gives the unit a very clean, finished, overall attractive appearance. That's going to do it for today's look at the Optronics Flush Mount Trailer Clearance or Side Marker Light.
Average Customer Rating: 4.9 out of 5 stars (34 Customer Reviews)
3-3/4" x 2-1/4" Rectangle. Incandescent trailer light functions as a clearance or side marker light when properly mounted. Durable ABS housing. Flush mount to trailer - hardware included. 2-Wire design. P2 rated. (1) 194 bulb.Ordering was easy, parts showed up in a timely manner, prices were reasonable.
I needed an exact size replacement, and while red lens lights are available from various sources, etrailer had the only amber lens unit I could find (in fact, I bought it just for the lens).
Upgraded to these LED lights. They are direct replacement for my existing ones on camper, which I was told no longer available. Etrailer certainly has them.
Exactly what we needed ! Perfect replac ement
I thought it would be difficult to find the identical side marker light for my 05 Alpinlite 5th wheel. But you guys have, that was great. A good price and fast shipping. Just what you look for. Keep it up.
Bought this for a replacement on my tow dolly. Nice fit and finished look/
Rob
6/20/2018
Still work as the day they were bought
Great selection of products at a great price. Standard delivery was quick (2 business days). These lights are an exact match for the clearance and side marker lights on my '95 Beaver Marquis.
I am very pleased with the quality of the product! I was pleasantly surprised with the high quality of the light considering the low prices you offer. Thanks!
Jeff C.
The lights fit perfectly on my Airstream Legacy RV. They were on time, too. The product is just as the picture and were easy to install.
This review is not for the item, is for the etrailer.com the best web side company the offers the best items and the delivery fast and good prices.
Very pleased with order, came quick and was perfect for my trailer light repair. I am a satisfied customer.
I was amazed at how fast my product was packed and shipped to me..i ordered my parts mid day and few hours later they where picked up and on there way to me.. I would do buissness with etrailer.com again and again.....
Fast shipping, great price took awhile to find these lights since I installed them years ago. Thanks for the great service!
Fast and amazing service. I wish all Internet shopping was this easy. The products were just as I expected. Thank you very much!!!
This was exactly what we needed to repair our horse trailer. Thanks
Part arrived quickly with no damage. Will use again if additional parts are needed.
Randall D.
8/31/2015
This was for a coach we had repaired. We have not heard any feedback or issues from the customer so I can only assume everything is good at thispoint.
Very happy with the running light. Just as advertised and at a Great Price. I will definately buy from again. Highly Reccommend.
The light is an exact match for the OEM one and looks great
Peter
11/12/2021
Its working really well and matched the OEM lights.
Exact replacement for my Trails West 4H GN.
GREAT REPLACEMENT ITEM.........
Just what I needed awesome service and fast shipping thanks again!
Found things here I've been looking for years. Quick delivery, highly recommend this organization
The product came in on time and was a perfect match.
Thanks!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob
9/21/2016
Still like.