See what our Experts say about this Optronics Trailer Lights

• Can LED Strip Lights Be Added To The Exterior Of An RV
  If you're wanting to add on led strip lights to the exterior of your RV then you'll want to choose one that's weatherproof and rated to withstand weather, like the Optronics Flexible LED Light Strip # UCL90CB. These light strips come with a peel and stick backing that would should hold up to the outdoors but can always be replaced with a heavier-duty adhesive if you have any issues.
  view full answer...
• Recommended Flat Tow Setup for Blue Ox Tow Bar on 2008 Honda CR-V
  For your 2008 Honda CR-V, you will want to start with the Blue Ox Base Plate Kit - Removable Arms # BX2246 which will be directly compatible with your tow bar. The tow bar you are describing is likely the old alpha or avail model, either of which will work just fine. If you want to determine which model you have, you can find it printed on the driver's side leg under the latch handle according to my contact at Blue Ox. If you don't have the safety chains, you will also want # BX88196....
  view full answer...
  
• How to Install the Optronics Flexible LED Light Strip Using Separate Connectors
  Thanks for the picture! The Optronics Flexible LED Light Strip item # UCL90CB is extremely versatile. It will connect to any 12-volt power source so I am sure whatever power source and switch your lights are currently running off of will work with these. They do not come with their own switch so I hope that clears up the confusion. The Optronics Flexible LED Light Strip item # UCL90CB is 17' long so you will just need one spool. You will need to use one of the Optronics LED Light Strip...
  view full answer...
  
• Recommended LED Light Strip for a 2015 Curiser RV Fun Finder
  The Valterra Mini Rope Light you're referring too has been discontinued but yes you could cut it and splice it to a 12V power supply. If you're just trying to add an LED light strip to replace your current LED lights, then I recommend just going with the LED Light Strip # UCL90CB. This light strip is 17' long but can be cut every 3 LEDs, white in color, and has an exposed end for you to be able to easily splice into your setup.
  view full answer...
• Color of Light Output for the Optronics Flexible LED Light Strip # UCL90CB
  The Optronics Flexible LED Light Strip # UCL90CB that you referenced does put off a bit off a purplish hue. If you check out the two pictures I attached you'll see what I mean. It still puts out enough light to be useful though so it would work great in your shed.
  view full answer...
  
• Replacement LED Light Strip Option for Carefree Awning
  The Optronics Flexible LED Light Strip # UCL90CB is definitely 3/8" wide so it will be too wide for your awning, but you could still clean the side of your camper and mount this directly to the wall if you wish, that way you can use it without having to completely open up your awning. I looked at some of our other options and they look to be too large as well so we don't have anything that will be a direct replacement for that channel in your Carefree awning tube.
  view full answer...
• Will the LED Light Strip Kit Work With the Solera Smart Arm 12V Power RV Awning
  I spoke with Lippert about the Solera Smart Arm 12V Power RV Awning part # LC517517 and they informed me that this is not compatible with the LED Fabric Light Kit with Switch/Plate for Solera RV Awning part # LC674282. There are certain roller tubes that have this channel for the light kit and others that do not which is the case for the one that comes with this awning kit. That said, you could just attach the Optronics Flexible LED Light Strip part # UCL90CB directly to the trailer and...
  view full answer...
• Width of Optronics 17' Flexible LED Light Strip
  The width of the Optronics Flexible LED Light Strip # UCL90CB is about 3/8". I have attached a review video where we take this measurement for you to check out. To help remove the 3M adhesive I recommend using some heat like a hair dryer or something similar. You may need to use a tool to scrap the adhesive off as well. I'd try using something that is plastic or rubber to help avoid scratching anything.
  view full answer...
  
• Recommended Weatherproof LED Strip Light for Keystone Montana 5th Wheel
  I recommend using the Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long # UCL90CB, which is a weatherproof light that can be connected to an existing strip or wired directly to a 12v power source. These will be the perfect solution for the front of your Keystone Montana since they're weatherproof and they can be easily applied with the peel and stick backing. I've linked a review video of these lights as well as the other LED strip lights we have available if you'd like...
  view full answer...
• Would Optronics Flexible LED Light Strip # UCL90CB Replace Carefree Awning Light
  Yes the Optronics Flexible LED Light Strip # UCL90CB would replace your Carefree LED lights and would splice right to the same wiring of what you have now.
  view full answer...
• Can Optronics Flexible LED Light Strip # UCL90CB be Used as Three Light Strips
  Hey Brian we used to carry the connector part number A90P1B that was used to connect different sections of the Optronics Flexible LED Light Strip # UCL90CB but at this time we can't get it anymore. If instead you were wanting to have three independent sections wired to a power source you'd have to order three of these as only one strip has power wires ran to it.
  view full answer...
• Remote Control for LED Light Strip
  Because these are hardwired strip lights without a switch, there will not be a remote control that is available to work with them. We do offer an LED Light Strip Kit with a Wireless Remote # DG52665 that is a bright white LED light and is dimmable.
  view full answer...
• What Are the Dimensions of the Optronics LED Strip Connector
  The Optronics LED Light Strip Connector - Snap On # A90P1B has the following dimensions: 5/8" tall 13/16" length 9/16" width. 3/8" width of opening for connecting strips. These connectors allow you to connect multiple strands of the LED strip lights like the Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long # UCL90CB.
  view full answer...
  
• Amperage Draw of Optronics Flexible LED Light Strip # UCL90CB
  I spoke with Optronics and they informed me that if you used the full reel of the Optronics Flexible LED Light Strip - Weatherproof - White - 17 Long Item # UCL90CB the amperage draw would be 2.7 amps.
  view full answer...
• What Front Cap LED Lights do I Need for My 2019 Grand Design Momentum 351M Toy Hauler?
  I did some research on your cap LED light strips on your 2019 Grand Design Momentum 351M toy hauler. We do carry LED strips that are compatible. - Optronics Flexible LED Light Strip - Weatherproof - White # UCL90CB Also, if you need to connect two sections of LED strips together, you will need the connectors # A90P1B.
  view full answer...
• Using the Optronics Flexible LED Light Strip in Cargo Trailer
  Yes, the Optronics Flexible LED Light Strip, # UCL90CB hardwires to any 12-volt power source with a 2-Wire pigtail. What you described will work.
  view full answer...
• Can the Optronics Flexible LED Light Strip Be Cut With New Ends Put On
  Yes, the Optronics Flexible LED Light Strip part # UCL90CB can be cut to the desired length you need for your application. That said, there are cut lines on the strip you must use which are located every 2". Once the cut is made you can then use the Optronics LED Light Strip 12-Volt Connector with Wire Leads part # A90PB to make your connections.
  view full answer...
• Will Optronics Flexible LED Light Strip Work in Place of LED Light Strip for Solera RV Awning
  The Optronics Flexible LED Light Strip part # UCL90CB is 3/8" wide as is the Replacement LED Light Strip for Solera RV Awnings part # LC423331 so you should be able to swap them for one another but we cannot confirm this. Please note, the former light strip is only 17' long whereas the latter is 20' but they are both cut to fit.
  view full answer...
• Recommended Light Strip For Creating Custom Length Lights
  I do have a recommendation for you as the Access LED Truck Bed Lighting System # A70380 is not designed to be connected to other light strips. The Optronics Flexible LED Light Strip # UCL90CB is a 17' roll with the ability to be cut every 1-15/16" to give you a custom length. You can attach it to a switch using the included wiring or we have the Light Strip 12-Volt Connector # A90PB if you are connecting multiple sections. We do offer a On/Off Push Button Switch # DG52452VP you will be...
  view full answer...
• Can The Optronics Flexible LED Light Strip Be Cut And Used In Smaller Sections?
  Yes, the Optronics Flexible LED Light Strip # UCL90CB does have wiring on both ends allowing you to cut the strip in 2. We also have the Optronics LED Light Strip 12-Volt Connector with Wire Leads # A90PB if you need to cut it into additional pieces.
  view full answer...
• How Many Strips of Optronics Flexible LED Light Strip # A90P1B Can Be Connected Together
  Optronics recommends only connecting two of the LED light strips part # UCL90CB together with the # A90P1B. This would put you at a total of 34 feet since each strip is 17 feet long.
  view full answer...
• Installation Method for Lippert 15-Foot LED Fabric Light Kit for Solera RV Awnings LC674282
  The Lippert 15-Foot LED Fabric Light Kit for Solera RV Awnings # LC674282 is intended to install by sliding into the light cord by the coach sidewall, under the awning, that is sewn into the awning fabric. If you prefer an LED light strip that installs with an adhesive backing we offer 17-foot Optronics LED Light Strip # UCL90CB. This waterproof light strip has 3M peel-and-stick adhesive backing and a total of 300 diodes. Multiple light strips # UCL90CB can be joined together simply by...
  view full answer...
• How To Install LED Light Strips Inside An Enclosed Trailer
  The Optronics Flexible LED Light Strip part # UCL90CB would be the best option for adding LED strips to the inside of an enclosed trailer. The strips can be cut to fit you exact needs and they feature a simple two wire design. The wires could then be run to a toggle switch like part # PK34571 which can be mounted outside if the boot part # PK25370 is used and then to the battery wherever that may be. In regards to adding a solar panel, this would really be dependent on how much power you...
  view full answer...
• Submersible/Weather-Proof LED Light Strip Options For A Horse Trailer
  We do have a couple of options that are similar to the Opti-Brite LED Strip Light for RV Awnings # ILL71CBAWN that you're looking for, but we do not have an exact copy of this LED light strip that is submersible. Instead, take a look at the: -Thinline Opti-Brite LED Utility Light Strip - Submersible # ILL72CB which measures 22" long, or the, -Optronics Thinline LED Utility Light Bar - Submersible # BUL69CB which measures 15" long. Either of these options will work great for you and...
  view full answer...