1. Trailer Lights
  2. Bargman
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red/White/Amber
LED Triple Trailer Tail Light - 4 Function - 36 Diodes - Chrome Base - Red, Amber, and Clear Lens

LED Triple Trailer Tail Light - 4 Function - 36 Diodes - Chrome Base - Red, Amber, and Clear Lens

Item # 47-85-004
lowest price pledge
Retail:$112.51
Our Price: $73.31
You Save: 35%
Trailer Lights
This item qualifies for Free Shipping
Shipping Weight: 1.98 lbs
Quantity: 
In Stock
LED Triple Trailer Tail Light - 4 Function - 36 Diodes - Chrome Base - Red, Amber, and Clear Lens Red/White/Amber 47-85-004
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

14-1/16" x 6-15/16" Rectangle. Triple LED trailer light serves 4 functions: brake, tail, turn, and incandescent backup. Amber lens for turn function. Built-in reflex reflector. Recessed mount. Pre-wired design. Lowest Prices for the best trailer lights from Bargman. LED Triple Trailer Tail Light - 4 Function - 36 Diodes - Chrome Base - Red, Amber, and Clear Lens part number 47-85-004 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (270)
  • Q & A (4)
  • Videos (1)
  • Photos
  • Why etrailer?

Bargman Trailer Lights - 47-85-004

  • Tail Lights
  • Rectangle
  • LED Light
  • Red/White/Amber
  • Recessed Mount
  • 14L x 7W Inch
  • Bargman
  • Non-Submersible Lights
  • Stop/Turn/Tail/Backup
  • Rear Reflector

14-1/16" x 6-15/16" Rectangle. Triple LED trailer light serves 4 functions: brake, tail, turn, and incandescent backup. Amber lens for turn function. Built-in reflex reflector. Recessed mount. Pre-wired design.


Features:

  • Triple LED trailer light serves 4 functions
    • Red LEDs for stop and tail light
    • Amber LEDs for turn signal
    • Backup light with incandescent bulb
  • Built-in reflex reflector removes the need for a separate reflector
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Incandescent bulb for reverse light can be easily replaced
  • Stylish chrome base has rounded corners
  • Durable ABS housing
  • Red and amber lens over white LEDs
    • Clear lens over incandescent bulb
  • Recessed mount
    • Requires a 12-11/16" x 5-1/2" cutout
    • Tail light can be mounted vertically or horizontally
  • Pre-wired design - power and ground wires
  • DOT compliant
    • Meets FMVSS/CMVSS 108 requirements


Specs:

  • Overall dimensions: 14-1/16" long x 6-15/16" wide x 2-1/4" thick
  • Diodes: 36
  • 1-Year limited warranty


Bargman LED Triple Combination Tail Light Diagram



47-85-004 Bargman LED Recessed Triple Tail Light - 84, 85 Series - Stop, Tail, Turn - Amber Turn - Incandescent Backup - 36 Diodes - Chrome Base - Red, Amber and Clear Lens




California residents: click here


Video of LED Triple Trailer Tail Light - 4 Function - 36 Diodes - Chrome Base - Red, Amber, and Clear Lens

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bargman Trailer Lights - Tail Lights - 47-85-004 Review

Today we're going to be taking a look at part number 47-85-004. This is the Bargman Triple Tail Light - 84 and 85 Series. It's going to feature 3 light fixtures. It's going to have 1 red LED tail light. This is going to function as your running light, brake light and turn signal light. You're going to have 1 amber LED brake and turn signal light.

And you're going to have 1 incandescent reverse light for your trailer or RV. LED's are going to be a great replacements for incandescent lights. They're going to burn brighter, they're much more efficient, they last longer, you don't have to worry about changing the bulbs and you don't have worry about brittle filaments. They have a lower power consumption, as well as a quicker activation. So LED's are going to respond faster than incandescent bulbs. On this side your going to have the incandescent reverse light. That's going to be surrounded by Class A red reflective lens.

So that's red reflex reflective lens. Again, class A, it's already built into the lens so you don't have to worry about a separate reflector. The tail light can be mounted horizontally or vertically, whatever one works best for your application. It's also going to have the stylish chrome base with the rounded corners. It has a nice clean, finished, sleek look. And it's going to be pre-wired, so it's got the pre-wired design, all the wires here on the back.

On the back of the housings of the light it's going to tell you the functions of each wire, so that way you know how to wire the system. The unit is the Primary Transportation compliant. We're going to take a look at some of the overall measurements real quick, starting with the overall length. It's going to give us a measurement of about 14 1/16 of an inch. The overall width, that's going to measure about 6 15/16 of an inch, so about 7 inches. Now this is designed to be a recessed mount installation. You see we have all the mounting holes going around the perimeter of the housing here.

Your mounting hardware is not included so you will need to provide that separately. But with it being a recessed mount, that means we do need a cut-out. So we're going to go over the cut-out dimensions. Measuring from this point here to this point here. It's going to give us a measurement of about 12 11/16 of an inch. And if we measure the width that we're going to need of that cut-out, it's going to measure about 5 1/2 inches. We're going to go and hook it up to our external power source, that way you can see what it looks like with power running to it. Our white wire is going to be our ground wire, so we can go ahead and make that connection. On the back of the housing here, it says that the black wire is going to be for our stop and turn signals. And then that would mean that our green wire is going to our taillight. So you can see here that the light sends out a nice consistent signal. Again with the red one, that's where our tail light or running light feature's going to be, and then when we apply our brakes you see how they all illuminate. Now another thing I want to point out is that each light's going to contain multiple diodes, so you can see all the diodes that we have in there. That's going to really optimize our light output, sends out a nice, strong, consistent signal. It's also going to illuminate like that when we activate our brakes. Then if I hook up the reverse light, you can see there it's very bright. It's got the clear lens directly in the center, allows a lot of light to come through. And then it's going to have that Class A red reflex reflective lens that surrounds that clear area. That's going to do it for today's look at part number 47-85-004.


Customer Reviews

LED Triple Trailer Tail Light - 4 Function - 36 Diodes - Chrome Base - Red, Amber, and Clear Lens - 47-85-004

Average Customer Rating:  4.8 out of 5 stars   (270 Customer Reviews)

14-1/16" x 6-15/16" Rectangle. Triple LED trailer light serves 4 functions: brake, tail, turn, and incandescent backup. Amber lens for turn function. Built-in reflex reflector. Recessed mount. Pre-wired design.

- 47-85-004
by:

This is one of the best upgrades I've made. They are much brighter and come on much faster than the former incandescent bulb fixtures. 246501



- 47-85-004
by:

We just received it yesterday and looks good. 898717



- 47-85-004
by:

They look great, but as of right now we haven't got them put on yet. 837865



- 47-85-004
by:

Very easy to install. Just have a little problem with the reverse and there isn’t anything on line how to wire them but I am sure I will figure it out. But the lights are gorgeous. Great upgrade. 100 stars. 777575



- 47-85-004
by:

Great product came as advertised, shipped on time,fit perfectly! Retailer is a pleasure to do business with. I will purchase other items in the future. Thanks. MUCH BRIGHTER THAN INCANDESCENT!!!! 705999



- 47-85-004
by:

Great fit and finish. Mounted in same location as old Bergman lights on motor home. Wiring straight forward. I used close end butt connectors, well crimped - no problem. 686540


Comments
No LEDs burnt out, whole fixture still looks new, and that after spending a lot of time outside in the Arizona sun.
Dave i - 08/13/2020

97189

- 47-85-004
by:

Tail lights worked great. Going to be ordering springs for another trailer soon. 657644



- 47-85-004
by:

lights are to replace my old lights in my horse trailer, because I had to mount them vertical, the problem is the way that the frame is may ,will not allow water to drain out , the backup light is not seal from the back so this lets to collect dust/water inside of the light lens my fenders are where the lights are mounted and only has a plate to defect rocks and mud from the lights, I did have to widening the frame where my old lights mounting , notice that there is not much room for the bolts holes has to be kept close 577881



- 47-85-004
by:

Gast shipping and great product and pri ce. 487815



- 47-85-004
by:

Product is great, is doing what I want them to do. 270284


Comments
Have had no problem with the lights whatsoever. Had a similar set on my previous motorhome and loved them too.
Jim H - 07/10/2017

25890

- 47-85-004
by:

The product was exactly what I expected but the service exceeded my wildest expectation. The confirmation email as well as the shipping status emails were very timely and personalized to make me feel like I am a customer, a valued customer. etailer has definitely earned me as a customer for the foreseeable future. 141807



- 47-84-009
by:

Review from a similar 84/85 Series in Trailer Lights


Great product, it came a couple of days ago. It was packaged perfectly, no damage, but the box looked like it had been used in a Samsonite Commercial on television! 394932


Comments
They work perfectly. If you remember the Samsonite Commercials on the Television in the 60s and 70s thats how the box looked like the gorrial in the commercial had used it to reverse the commercial. The lights work perfectly
PatrickA51 - 06/16/2018

39839

- 47-84-104
by:

Review from a similar 84/85 Series in Trailer Lights


Great looking lights, can’t wait to install them. Was nice to find a product close in size to my existing lights, they’re slightly smaller but big enough to cover the existing holes. I’ve changed out all the clearance and side marker lights to LED’s, these will complete this project on my RV. Thank you so much, Bill Nikon 726370



- 47-84-009
by:

Review from a similar 84/85 Series in Trailer Lights


I got them put on my 2014 forest River and it a wow how much better it light up at night !!! LOVE THEM !!! Paul 273880



- 30-85-002
by:

Review from a similar 84/85 Series in Trailer Lights


Bought two rear lights for my camper .Came in on thursday and installed in 40 minutes .This is my second order and , great service and prompt shipment . thank you.TOO YOU ALL AT ETRAILER ..... 405829



- 47-84-009
by:

Review from a similar 84/85 Series in Trailer Lights


Fantastic lights! Very bright! 384733



- 47-84-009
by:

Review from a similar 84/85 Series in Trailer Lights


Great Product. Easy replacement for older RVs to upgrade to LED. You will need load resisters to prevent hyperflash turn signals. No biggie. Very bright and really quick shippers here. 129802


Comments
Where are the load resisters purchased from and what is the load of the resister?
-- comment by: Steven R - 10/27/2014

7463

The load resistors that we currently have are the Aluminum version 2 pack # P230004A-2
Putco LED Light Bulb Load-Resistors - Aluminum - Qty 2
$47.77
and the Ceramic 2 pack version # P230004C-2
Putco LED Light Bulb Load-Resistors - Ceramic - Qty 2
$32.89
both of which have a provide a resistance of 6 ohms.

-- Rachael H - 10/29/2014

Comments
How many load resistors do you need for each unit?
-- comment by: Glen - 08/02/2015

13815

- 47-84-009
by:

Review from a similar 84/85 Series in Trailer Lights


The backup light on my RV went out. The problem was a rusted bulb socket. I would have to replace the whole tail/backup/brake assembly. SO......I decided to "go LED" and order the Bargman Triple Tail Light 84 series from etrailer. The order was processed and delivered quickly. There was a bit of work to modify the existing cutout to accept the new Bargman Triple Tail Light. But I think it was worth it. I also installed the LED Backup Light Upgrade Kit to the Triple Tail Light. These really look good on the MotorHome and I should not have to work on them again. The picture shows the old and the new installed for comparison. 479787



- 47-84-009
by:

Review from a similar 84/85 Series in Trailer Lights


I first ordered and didn't realize they were sold individually. So I did order another one. They are a replacement for the original style lights that were not LED. They fit perfectly and are really bright. I soldered and heat shrinked all the wiring and installed butyl tape when I installed them. I did order the metal resistors so that I didn't have the hyper flash. They renew the look of an older RV. The shipping was two days and I loved that. 463336


Comments
Still working as advertised and would still recommend them. Excellent product.
Hoppers - 12/29/2018

48077

- 30-85-002
by:

Review from a similar 84/85 Series in Trailer Lights


Works very good very happy with it. 458244



- 47-84-009
by:

Review from a similar 84/85 Series in Trailer Lights


Just got around to installing the new Bargman tail lights on my 1995 Dolphin motor home. The turn signals flash very rapid and I believe I would need to install a resistor to cure this. Can you point me in the right direction ??? 597895


Comments
Yes you will need load resistors, one for each turn signal circuit. I recommend part P230004A-2.
-- Heather A - 01/16/2019

48622

- 47-85-002
by: 11/13/2020

Review from a similar 84/85 Series in Trailer Lights


Really worked well on my R/V L E D sure makes a difference! 911497



- 47-84-008
by:

Review from a similar 84/85 Series in Trailer Lights


fast shipping lights were perfect fit 909970



- 30-85-002
by:

Review from a similar 84/85 Series in Trailer Lights


Perfect. Exact replacement for my old taillights on my 1988 Dolphin class a. I replaced the incandescent bulbs with led bulbs and they're nice and bright. 907162



- 47-85-611
by:

Review from a similar 84/85 Series in Trailer Lights


Well built product 905054


26
275
Show More Reviews

Ask the Experts about this Bargman Trailer Lights

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Brian T
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.