Bargman LED Double Tail Light - 4 Function - 36 Diodes - Rectangle - Black Base - Red Lens

Bargman LED Double Tail Light - 4 Function - 36 Diodes - Rectangle - Black Base - Red Lens

Item # 47-84-610

lowest price pledge

Retail:$74.74

Our Price: $40.33

You Save: 46%
Trailer Lights

Orders above $50 qualify for Free Shipping

Shipping Weight: 1.48 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
Trailer Lights 47-84-610 - Non-Submersible Lights - Bargman
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

10-1/4" x 7-1/4" Rectangle. Double LED trailer tail light serves 4 functions: brake, tail, rear reflector, and turn signal. Durable plastic housing and lens. Surface mount - hardware not included. 6-Wire design. Lowest Prices for the best trailer lights from Bargman. Bargman LED Double Tail Light - 4 Function - 36 Diodes - Rectangle - Black Base - Red Lens part number 47-84-610 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (213)
  • Q & A (35)
  • Videos (2)
  • Photos
  • Why etrailer?

Bargman Trailer Lights - 47-84-610

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • Surface Mount
  • 10L x 7W Inch
  • Non-Submersible Lights
  • Bargman
  • Stop/Turn/Tail
  • Rear Reflector

10-1/4" x 7-1/4" Rectangle. Double LED trailer tail light serves 4 functions: brake, tail, rear reflector, and turn signal. Durable plastic housing and lens. Surface mount - hardware not included. 6-Wire design.


Features:

  • Double LED trailer tail light serves 4 functions
    • Stop, tail, turn, rear reflector
    • Built-in reflex reflector removes the need for a separate reflector
  • Radius styling has smooth appearance with rounded corners
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Red lens over white LEDs
  • Durable ABS housing
  • Compatible with 12V DC systems
  • Surface mount to trailer - hardware not included
    • Mounts in vertical or horizontal position
  • 6-Wire design includes power lead and ground wires
  • DOT compliant
    • Meets FMVSS/CMVSS 108 requirements


Specs:

  • Dimensions: 10-1/4" wide x 7-1/4" tall x 1-7/8" thick
  • Distance between mounting holes center to center:
    • Horizontally: 9-5/8"
    • Vertically: 6-3/4"
  • Diodes: 36
    • 18 Diodes on each side of light
  • Power draw at 12V:
    • Stop/turn: 0.3 amps
    • Tail: 0.06 amps
  • Wire length: 6"
  • Wire gauge: 16
  • 1-Year limited warranty


Bargman 47-84-610 Double Tail Light Diagram

Surface-Mount Light

Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.



47-84-610 Bargman 84 Series LED Double Tail Light - Stop, Tail, Turn - 36 Diodes - Black Base - Surface Mount - Red Lens






California residents: click here


Video of Bargman LED Double Tail Light - 4 Function - 36 Diodes - Rectangle - Black Base - Red Lens


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bargman LED Surface Mount Double Tail Light Installation

Today we're going to be showing you how to install the Bargman LED, Surface Mount, Double Tail Light. This is the 84 or 85 series in the red with the black base. It's part number is 47-84-610. Here's the tail light we're going to be replacing today. As you can see, it's working fine. That's not the issue. It's just got a lot of the sun fading and things like that.

It's starting to get older looking. Our customer really wants to refresh the look of his race trailer here. We're going to be replacing that. When we do that, as you can see here on the other side we've already got the LED installed, it gives it a really nice, clean, crisp look. Lights look really nice.

Still has that double design to where we've got both sides there. It's going to go in, a little bit of caulk behind it. Pretty easy installation to do. It's really going to clean up the look. We've already replaced the rest of the lights on the trailer with LED lights so just jumping into this one to show you how it works. Whatever the fasteners are, you'll use that type of tool.

Just go ahead and remove our old tail light here. What we'll see back behind there is going to be some crud and debris and stuff like that built up over time. Also we're going to have our main wires coming out. We've got our brown wire, our white wire, and our green wire. We'll snip, snip, snip right here.

That will give us some fresh ends to deal with. Since that light is still working, put it on a different trailer, whatever you want to do. You can put on the back of your kid's wagon. It's still a functional light. It just doesn't look as nice as the new ones going in. Let's grab these and strip back the end of each of our wires here. If you look on the back of our light itself, we've got 2 green wires. These are going to be for our tail lights. We've got 2 black wires. These are going to be for our brake lights. Then we've got 2 wires ran into a union here. Then that white wire is going to be for our ground. Yours may not be this way, but these are stripped off a little bit long. I'm going to take off just a little bit off the end here. Let's twist our green connections together there. We're going to apply a large heat-shrink butt connector here. If you don't have these at home, we've got them available on our website. You can check that out and pick up a couple to get those connections made. For this one, we can go with a little bit smaller butt connector since we're only doing one wire. Again, that's heat shrink, what you consider to be semi on the outside or the exterior of the vehicle. Those heat shrinks will give us a little vapor barrier there to protect it. I'm just going to clean this out. The next thing we want to do is let's go ahead and turn our tail lights back on, make sure none of your wires are touching. We're going to turn those tail lights back on and just check and see which one of these are for the tail light wire. That way we don't have tail lights coming on when the brakes should and vice versa. We'll right off our ground wire there. With the tail lights on, let's check our brown one. You can see the light there. Touch our green one, that lights going to come on and off. We'll know that's the one we want to use for our tail light. Our other one will be for the brake. It says green wire, tail light; black wire, stop and turn. Our black wire is going get connected to our blinker brake circuit here. Green is going to go to green. You'll want to check that, of course, on your trailer just like we did to make sure you're getting the signal that you want. The white is going to connect with the white coming out of our trailer. Now we'll grab a heat gun or a different type of heat source. In our case, we're just going to use a lighter. We want to shrink each of those ends down and allow that to give it a good, nice seal on those to protect from any moisture. If you do use a lighter, try to use the lower portion of the flame, down there where it's blue. It's going to be a little bit warmer. It's also not going to give you that black carbon buildup that you'll see. All right, looking good. Now I'm going to bring in a little bit of caulk. I'm going to fill this groove up on the back side here. It will give us a really nice moisture protection. It's going to squeeze out when we screw the light down into place. It's okay. Just wipe it off with our finger, clean towel, whatever we've got. I'd rather it come out and us have to clean it up than let a bunch of moisture get in here behind our lights. We'll just guide our wire up and in. Then we'll use our old holes as reference. They're not going to line up exactly with our old holes, but we can use that to level everything out, get it all centered. Then we'll go ahead and put it on there and give it a little push. It's going to help hold it. Then we need to bring in our fasteners and resecure. A good seal all the way around. I'll bring my finger around, and it's going to clean up most of that excess for us. Then anywhere we've got crud over here, we've got this old hole. Just fill that up caulk. That way we won't have to worry about any moisture going in. Now when I clean this up, I'm not looking to get all the caulk off. I just want it to be consistent, get off any heavier areas where water or wind or time, any of that might be able to pull it down some and let water start getting in from behind, any of those higher spots. Of course, you want your seal behind your light to stay. You don't want to wipe all that out. I'm just going to clean up the face a little bit. There we go. It's installed. Let's go hit the tail lights on and make sure it's working properly. As you can see, in just a few, short minutes we're able to either upgrade our trailer or fix a nonworking light very quickly and easily. With everything working as it should, that's going to complete today's installation of the Bargman LED, Surface Mount, Double Tail Light, part number 47-84-610, on our car-hauling trailer. .


Customer Reviews

Bargman LED Double Tail Light - 4 Function - 36 Diodes - Rectangle - Black Base - Red Lens - 47-84-610

Average Customer Rating:  4.8 out of 5 stars   (213 Customer Reviews)

10-1/4" x 7-1/4" Rectangle. Double LED trailer tail light serves 4 functions: brake, tail, rear reflector, and turn signal. Durable plastic housing and lens. Surface mount - hardware not included. 6-Wire design.

- 47-84-610
by:

I just wanted to let you know how I came to order though etrailer. Of course I found the signal lights elsewhere online. They did not have enough information on their wiring. My plan to learn more was to go to etrailer, your price was within a few $, and you had plenty of pictures, I could see what I wanted to know. So I ordered through you for have the extra info theother guys didn't. 639550



- 47-84-610
by:

I've installed several sets of these lights on several 5th wheels. The industry "standard" of using a couple of cheap incandescent bulbs for the tail lights is a good way to get run over in bright day light. You can barely see the OEM tail lights in bright sun. These LED lights are very bright and are easily seen even in bright day light. The lights are sealed with only the wire leads exposed to the elements so they can be mounted on a non-flat surface such as a older trailer that has aluminum siding instead of fiberglass. I install the lights using marine butt connectors that have the heat shrink seal to ensure the connection is water tight. For some reason these lights come in a black housing. Who has a trailer that uses black trim, not very many. I remove the lenses from the nylon housing (four screws), paint the housing white and reinstall the lights. No big deal and now you have a color coordinated tail light. Use a #8 one inch self tapping screws to install and you got this project completed. 127743



- 47-84-610
by:

Just wanted to tell you that I have finally installed the product I ordered from etrailer.com, and I must say that it is by far the best product I have ever used. They are bright, and very visible even during daytime. Just wanted to tell you that I have finally installed the product I ordered from etrailer.com, and I must say that it is by far the best product I have ever used. They are bright, and very visible even during daytime. 33119



- 47-84-610
by:

I’m very happy with these LED tail lights. Bought them to replace the ones that came on the trailer. They are bright and seem to be of high quality. They were easy to install. The only slight drawback is that it’s a bit tricky to get the wires to lay flat enough against the light to get it to sit flush with the back of the trailer. But in the end it worked fine. I would recommend these as a good replacement for older, smaller, incandescent tail lights. 612458



- 47-84-610
by:

These are a super tail light and a great quality unit, easy to install. Beats the cheap junk that the manufacture put on your 5th wheels and motor homes. E-trailer is the best got them quick and they always are there for you when you need them. I have bought lots from them and they have never let me down. Have a problem they jump to it a solve the problem right away. GO E-TRAILER YOU ROCK!!!!!!!! 614425



- 47-84-610
by:

Awesome product, and very bright specially the turn signal and brake lights. I am sure that people on the road will definitely see my lights on every side because I also installed LED on all my marker, clearance, and license plate lights. I highly recommend this product, and will definitely purchase all my lighting needs from etrailer.com Thanks guys for an awesome product!!! 33112


Comments

I am wanting to upgrade to some brighter LED taillights on my fifth wheel . Are your LEDs still burning. Thanks, Mark

-- comment by: Mark E - 02/25/2016

16921

- 47-84-610
by:

Look great Nice and bright Well built Won't install until spring Will probably get the final star for 5/5 then Very fast shipping & good customer service Ordering from etrailer again is a sure thing 581818



- 47-84-610
by:

After speaking to the folks at ETrailer you realize that if you get a good price on a product from another company but do not have a live person that is qualified to answer your questions, how good of a deal is it? Carol was amazing and very patient making sure I was purchasing the right product. No more purchasing from the MEGA online store when it comes to our fifth wheel trailer, ETrailer is my one stop online store. Also the video reviews they offer for free are very helpful in making my product decisions. 583401



- 47-84-610
by:

Completed LED conversion. Sharing my completed project with you. 478239



- 47-84-610
by:

Appear to be just as described but make sure you read description. Listed as a tail light. I ordered 1 thinking it was a set. My mistake but you need 2 to do your trailer! 88461


Comments

Love them. Great investment

Joe S - 07/09/2014

5482

- 47-84-610
by:

I am Very pleased with these tail lights for our travel trailer. Shipping was fast. These lights are BRIGHT even in direct sunlight. I also ordered the LED trailer license-plate w/ mounting bracket, also very nice. Thankyou for Great products and timely service. 514491



- 47-84-610
by:

Finally, a quality replacement for RV Tail Light--92 Series. This surface mounted LED light installs easily after removing the series 92 light. It completely covers the screw holes used for the old style fixture. It’s at least 10 times brighter, or at least it looks that way. Installation was easy. Remove the lens from the old unit and then the screws holding it to your trailer. (Note: many units are surrounded with a bead for caulking, normally white or clear. Use a razor blade around the edges to release the old unit) Once the old units released just connect the new taillight and using stainless steel screws attach the new unit. I also sealed the new unit with a bead of clear silicone caulk. FYI – This unit does not provide a license plate light or means of attaching a license plate. Looks factory installed when you are done. Pictures are old tail light and new installation 113996


Comments

Hi Again: The TailBrake/Turn Signal lights have been un use all year and are working just fine. 100 satisfied with them and highly recommend themBob

Highway B - 01/16/2015

8655

- 47-84-610
by:

The 20 year old Bargmann 30-84-527 incandescent lamps were getting weak and were prone to blowing bulbs. I replaced them with these new LED units for reliability and improved visibility. The new light units are slightly larger than the old units. Because there are so many high profile vehicles on the road now, I also added a pair of Optronics STL264RB Fusion LED Combination Tail Light Bars for Trailers Over 80" Wide - Submersible - Red/Clear Lens as high level stop/tail/turn/reverse lamps to improve visibility in traffic. Photos show 1. New Bargmann (left), Old Bargmann (right) and Optronics lights, turned off. 2. New Bargmann (left), Old Bargmann (right), tail lights on. 3. New mounting holes are wider than old. I re-used the existing bottom mounting hole. 4. All LED brake lights 730035



- 47-84-610
by:

These led replacements are better than expected super bright and high quality not like other cheap knock offs I was skeptical at first because I thought they were a little pricey but after installing them and seeing how well made they are and have driven many miles in the dark and a year later they are still bright as new and still working 728550



- 47-84-610
by:

This item was chosen as an upgrade to a set of older incandescent Bergman fixtures on a friend ‘s enclosed motorcycle trailer . The LED version was slightly larger but still allowed me to use 2 original mounting holes to fasten them and merely drill the the others in place . Easy - peas , japeneasy . I eventually purchased a load of clearance lamps from e-trailer to finish off the trailer . I’m very pleased with the product choices AND service that I receive from E-Trailer . 724802



- 47-84-610
by:

PRODUCT WORKED GREAT ON CARGO TRAILER WAS EASY TO INSTALL, CUSTOMER SERVICE WAS VERY HELPFUL. 721808



- 47-84-610
by:

Nice and bright. Both light boxes blink, not jus a single in the double. This replaced bulb lights on an older trailer. Easy connection. 714601



- 47-84-610
by:

Again, great product 706575



- 47-84-610
by:

One incandescent single bulb tail light on my travel trailer needed replacing. Rather than replacing it with another cheap light, I elected to replace both of them with LED. This was the only LED light I could find that would cover all of the holes from the old lights. It is bright and attractive, half of the diodes could stop working and it would still be bright enough to finish a trip. Pro and con- the lack of room behind the light makes it stick out less, but there is no room for the wires to store behind the light. As my travel trailer has very little room in the wall for wiring, it was a tight fit. I added a screw on each corner to make it more secure pressing against the butyl sealant (not because the existing holes were not sufficient, but because the material on the trailer walls is thin). These lights are so well established that if one needs replacing it should be easy to find a replacement. 699080



- 47-84-610
by:

the lights i installed and they have worked ,no issues , worth the money spent on them, highly recommend them. 694454



- 47-84-610
by:

Love them. Almost exact refit (holes) for the old incandescent lights. Just reuse self tapping screws from old housing, set in a fresh bead of RTV, and you are in business. MUCH, much brighter, less power usage, and zero heat. Highly Recommend for anyone contemplating swapping tired old incandescent housings for LEDs. You’ll love them too. 686881



- 47-84-610
by:

Look good,installed easily. Can't comment on durability yet 686644



- 47-84-610
by:

Work very nice very bright 686504



- 47-84-610
by:

Very bright and easy to install. 673116



- 47-84-610
by:

This is a great upgrade to my 2018 trailer. Great value , and fast shipping make this a win win purchase. 662783



- 47-84-610
by:

Finally got past poor health and got taillights changed on our 1973 trailer. What an awesome change in lighting visibility. I wish I had done this years ago. It'll now be interesting to see how long they last. 657909



- 47-84-610
by:

Zero trouble seeing these night or dayt ime. 636691



- 47-84-610
by:

Tail lights were east to install. They enhance the look of the trailer. They are easily 3 times as bright as original equipment. Well worth the time and money invested, mental as well. Highly recommend these as an enhancement of your trailer. Etrailer quickly filled the order. I will use etrailer for future purchases. 635309



- 47-84-610
by:

Works good 629606



- 47-84-610
by:

great lights 628136



- 47-84-610
by:

Works great. Running lights are a little dim, but break lights are great! 607824


Comments

You might want to look over the connections in the running lamp circuit, just to make sure everything is tight and secure. A loose connection or a poor ground could cause lights that are slightly dimmer than they should be.

-- Mike L - 02/26/2019

49895

- 47-84-610
by:

looks and works great 604179



- 47-84-610
by:

looks and works great 604176



- 47-84-610
by:

looks and works great 604173



- 47-84-610
by:

looks and works great 603865



- 47-84-610
by:

Bargman Flush fitting lights 1 year follow up review. These lights are continuing to do the job for me and I am very happy with the choice I made. As replacement to the old fixtures that were on my trailer these are exact fit and took about 20 minutes to install. These lights are well worth the investment and will give great service with minimum care. 588001



- 47-84-610
by:

The visibility of our RVTrailer was greatly improved with addition of Led bargman tail lights. 578299



- 47-84-610
by:

maybe I misunderstood the listing but the small trailer lights I purchased did not come with bases and I would be needing some of them. Minimum two for the small lights and def the two for the fender lights. Thank you in advance for your time 577151



- 47-84-610
by:

Great replacement for old tail light as sembly 573736



- 47-84-610
by:

These lights are outstanding replacements for the cheap crap that came on my 5th wheel. The original ones were rusted out in less than 2 years. These show no signs of water infiltration and are mega times brighter than the OG lights. I recommend them wholeheartedly. 558534



- 47-84-610
by:

Thank you to etrailer for your quick shipping and professional follow up with our Volunteer Fire Department's order. We are updating our concession trailer for a fundraiser event in just a few weeks & your quick turnarounds are helping our deadline for repair. We will definitely purchase from your company again. 557925



- 47-84-610
by:

Very happy with them. Sold the RV we put them on. Bought a new RV and bought more of the lights! 556418



- 47-84-610
by:

Great quality and quick delivery! 550658



- 47-84-610
by:

i just got the products in, have not hooked up any thing yet, they all look good, 549124



- 47-84-610
by:

Look to be exactly what we need. We received a call from Ricky S telling us the part we ordered was not available. He did have an updated replacement. We agreed to the switch. Parts came in the 2 day freight as we paid for which was good. Very happy with the whole experience. Would definitely order from them again. Now I just have to have my husband install them. 548683



- 47-84-610
by:

Excellent quality. I replaced the cheap lights that Keystone installed on my 2016 Cougar. 543740



- 47-84-610
by:

1 year later and these are still working great. I love the LED look, and have finally completed all of my marker lights around the trailer to match. I'm not sure how bright/easy they are to see in bright sunlight as I can't follow myself around, but definitely a great upgrade over the old incandescent bulbs that I had before. 542874



- 47-84-610
by:

great i would recommend 529506



- 47-84-610
by:

Nice looking work great ...would buy ag ain. 529368



- 47-84-610
by:

The product was exactly what was advertised and the shipping was on time. Will do business again. 521883


65
234
Show More Reviews

Ask the Experts about this Bargman Trailer Lights

Do you have a question about this Trailer Light?


  • Upgrading Camper Lights to LED and Clearance Lights with Brake and Turn Signal Functions
  • Yes, you can upgrade to LED lights and have a double light set up in the rear with stop, tail, and turn light functions. But what I need to know is if the camper has the brake lights and turn signals on the same bulb or if it has separate amber turn signals. And if the camper does have combined brake and turn signals do you want to keep it that way or do you want to have separate turn signal and brake light circuits? We have several options for double tail lights, such as # 47-84-610,...
    view full answer...

  • Replacement for Bargman 30-84-013 Double Taillights
  • We do have a number of double taillight options, but you are correct that the Bargman 30-84-013 taillights are not longer in production. The best way to find a replacement is measure the length, width and depth of those taillights and find one as close in size as you can. Some options that may work for you are: - Bargman Recessed, Double Tail Light - 84 Series # 30-84-527 which is a recessed-mount light that measures 9-13/16" long x 6-15/16" wide x 1-1/4" thick - Bargman LED...
    view full answer...

  • Brightest Surface Mounted Trailer Tail Lights
  • There are a number of bright options for surface-mounted trailer tail lights, though all will be designed as brake, tail light and turn signals (you do not have to wire the turn signals and can simply tie that wire off on the light). The brightest surface-mount tail light is going to be the 80 diode LED Trailer Tail Light w/ Reflector # DG52720PB, as you can see by the accompanying photo of the linked video review I added which shows its brightness. After that will be the 36 diode...
    view full answer...

  • Difference Between Bargman LED Upgrade # 47-84-410 and Replacement LED # 47-84-420
  • The difference between the Bargman LED Upgrade Kit # 47-84-410 and the Replacement LED Module # 47-84-420 has to do with their application. The LED Upgrade Kit # 47-84-410 is designed to replace a light on a Bargman 84, 85, or 86 Series Incandescent Assembly like # 30-84-008 with an LED light. It's harness allows you to make this conversion without replacing the entire assembly. The Replacement LED Module # 47-84-420 on the other hand is just a direct replacement for an already LED...
    view full answer...

  • Comparing Brightness of Trailer LED Taillights RVSTLB61, 47-84-610, and DG52720PB
  • Of the three lights you mentioned the brightest option is the LED Trailer Tail Light w/ Reflector # DG52720PB as it has the most diodes of all of the lights you mentioned so it will be very bright and easily visible. All three of them are very bright though and would not have issues with visibility. The thing about LEDs is that they are substantially brighter than incandescent lights so whichever model you chose would still be very visible.
    view full answer...

  • Replacement Taillight Panel Recommendation for IST86 Lens on Cushman Cart
  • If your trailer taillights look like the Bargman LED Double Trailer Tail Light # 47-84-610 then the replacement # 47-84-410 is what you'd need for a red panel or the # 47-84-412 for amber. These are upgrade kits for converting them to LED.
    view full answer...

  • Recommended Bargman Surface-Mount Tail Light with Backup and License Plate Light
  • The Bargman Double Tail Light w. Backup assemblies, such as part # 30-84-008, are only available as recessed mount designs. We do have similar Bargman Double Light models as a surface mount with # 47-84-610, however they do not feature the backup light function. I recommend taking a look at the Bargman Tail Light # 30-92-109. This particular light assembly functions as combination brake, tail, turn signal light for your RV and also features a clear-lens reverse light, and license plate...
    view full answer...

  • LED Taillight Options to Replace Bargman 92 Series Taillights
  • Based on the 30-92-XXX partial part number you provided, it sounds like you have Bargman 92 Series taillights. These taillights measure 8-9/16 inches long x 4-9/16 inches wide x 2-1/8 inch thick. I have some options for LED taillights for you, however there is not a direct LED replacement for the 92/94 Series lights. If you want to stay with Bargman lights for you trailer, you can use the Bargman LED Surface Mount, Double Tail Light, 84/85 Series # 47-84-610. This double taillight offers...
    view full answer...

  • Does the Bargman LED, Surface Mount, Double Tail Light, # 47-84-610 Come in Pairs
  • The Bargman LED, Surface Mount, Double Tail Light, # 47-84-610, is sold in quantities of 1. We do have several options for light kits that include 2 lights, wiring, and other accessories, but none that include this light. I have included a link to the tail light kits for you.
    view full answer...

  • How To Wire The Bargman Red LED Tail Light, # 47-84-610, For Stop,Turn And Taillight Functions
  • The Bargman Red LED Tail Light, # 47-84-610, can be used as a stop, turn and taillight. It is made for both lights to operate as stop, turn and taillight. You could wire the one light to be stop and turn, and the other light as the taillight, but when the stop and turn is not used that light would be off. The green wires are for taillights and the black wires are for stop and turn. There is no certain location (top or bottom) that the functions need to be wired on a vertical taillight.
    view full answer...

  • LED Trailer Taillight Recommendation that Has License Plate Light
  • The Bargman 84 and 85 series taillights like the # 47-84-610 that you referenced don't have a license plate light, so a better option will be the # STL17RB for the left hand side light and then part # STL16RB for the right hand side. Then for a license plate bracket you would want the # LP5SB. The # STL17RB has a license plate light.
    view full answer...

  • Is the Bargman Surface Mount LED Double Tail Light Available with an Integrated License Plate Light
  • At this time there is not a version of the Bargman LED, Surface Mount, Double Tail Light, # 47-84-610, that incorporates a license plate light at the bottom of the housing. We do have a solution for you though. You could install the Bargman lights that you like and then install an LED license plate light like the LED Heavy Duty Trailer License Plate Light, # LPL41CB, or the LED Mini Trailer License Plate Light, # LPL31CB, above your license plate. If you need a bracket to attach the...
    view full answer...

  • What Is Amp Draw Of Bargman LED Surface Mount Tail Lights
  • I went to the warehouse and took a look at the Bargman Triple Tail Light, part # 47-85-002 and part # 47-84-610. Each of the light housings for the LED lights has 16 LEDs. So each of these assemblies has 32 LEDs. With high illumination this assembly would have a draw around .26 amps and at low illumination that draw would be about .02 amps. Since you are replacing the incandescent fixtures on your fifth wheel, these will certainly not draw much and would be brighter than the lights you have.
    view full answer...

  • Flush Mount Stop Turn and Tail Lights for a 1982 13 Foot Scamp Travel Trailer
  • I did a bit of research on your trailer and the reflect-o-lite light that you mentioned. It looks as if they are surface mount lights that are 6-7/8 inch diameter. For a replacement you could use the 7 inch round Transit LED Stop/Side Marker/Tail Light, # STL90RB, to have a somewhat original appearance, with an upgraded LED light. You could also use a surface mount like the Bargman LED, Surface Mount, Double Tail Light, # 47-84-610 which would be large enough to cover the original mounting...
    view full answer...

  • Is Bargman LED, Surface Mount, Double Tail Light Flexible
  • I went out to the warehouse and pulled the Bargman LED, Surface Mount, Double Tail Light # 47-84-610, which you referenced, and found that the mounting surface is a rigid, sturdy plastic material which will not allow for much flexibility. The only flexible LED lights that we carry that you may be able to modify to use are the Fire Strips, # TLB-001.
    view full answer...

  • Replacement Light Assembly for Trailer with 84 Series Lights
  • We do carry replacement light assemblies for your Bargman 84 Series lights. For a 2 panel light we have the part # 47-84-610 which has LED lights. For a three panel light we have the part # 47-84-009. The bulb you would need for a replacement is # 30-84-057.
    view full answer...

  • Getting Error Codes On 2016 Ford F-250 When Installing LED Trailer Lights
  • since 2015, Ford has changed their wiring in their trucks and it has been causing several different issues including the problem you are having with installing the LED lights. Resistors like the Putco LED Kit, part # P230004A are not always needed and it is recommended to install the lights like part # 47-84-610 first to see if any hyperflashing occurs. On the Ford trucks error codes may pop up as well and the resistors may work to resolve the issue. You would need a resistor for the...
    view full answer...

  • Replacement Tail Light Assembly For 1977 Prowler Camper Trailer
  • We have a few lights that I suggest as replacements for your current tail lights, however we don't have a OEM specific replacement tail light for your 1977 Prowler Camper Trailer based on year/make/model. The best way to determine replacement lights for the older campers is to go by shape and size of the original lights and choose a replacement that closely matches the original. I suggest the Bargman Single Tail Light - 86 Series - Red - Black Base, # 30-86-101 for the closest to original...
    view full answer...

  • Dimensions Of Bargman LED Tail Light 47-84-610
  • The Bargman LED Double Tail Light, part # 47-84-610, is a surface mount light. I have attached a photo of this light with the dimensions listed below. The base of the light is 10-1/4 inches by 7-1/4 inches, and 1-7/8 inches deep. Each lens is 4-1/8 inches by 5-1/2 inches, and 1 inch deep. The mounting holes on the longer sides of the light are 4-5/16 inches apart, center to center. The mounting holes on the ends of the light are 9-5/8 inches apart, center to center. The distance between...
    view full answer...

  • Does a Hole Need to Be Cut in Camper Wall to Install Bargman Trailer Light # 47-84-610
  • The Bargman Double Tail Light you referenced, part # 47-84-610 is a surface mount lamp, and will not require a large hole cut into the camper. The lamp would actually install to the outside wall of the camper. The only necessary hole would be for the wires to pass through from the interior of the camper wall.
    view full answer...

  • Is Bargman 84 Series Trailer Taillight # 47-84-610 Sold Individually or in Pairs
  • The Bargman LED, Surface Mount, Double Tail Light - 84, 85 Series - Red - Black Base Item # 47-84-610 is sold individually. If you needed a pair of these you'd need to order a quantity of 2.
    view full answer...

  • Recommended Surface Mount Trailer Tail Light
  • I have a surface mount tail light that is very similar to the # 47-85-611 recessed light you asked about but it is not under 10-inches. The Bargman LED, Surface Mount Double Tail Light, part # 47-84-610 measures 10-1/4 inches Long x 7-1/4 inches wide x 1-7/8 inch thick.
    view full answer...

  • Bargman LED, Surface Mount, Double Tail Light # 47-84-610 Sold Individually
  • The Bargman LED, Surface Mount, Double Tail Light # 47-84-610 that you referenced is sold individually.
    view full answer...

  • Replacement Taillights for 2002 Jayco Eagle
  • I'd love to help you replace those assemblies so you can fix up your camper before your husband comes home, and we almost certainly have taillight assemblies that will work for you, but there is no way for us to know exactly what assemblies are on your 2002 Jayco Eagle trailer; trailer manufacturers do not keep those kinds of records for us to access and on an '02 trailer there is a high likelihood that the light assemblies have been changed over the years. So the best way for you to...
    view full answer...

  • Installing Additional LED Taillights On 2012 KZ Spree Escape Camper to Clear Bikes on Bike Rack
  • The Bargman LED, Surface Mount, Double Tail Light # 47-84-610 will work well for you to add additional taillights on the back of your KZ Spree Escape. You can leave the stock taillights installed in the existing location on the trailer and add the # 47-84-610 further up the back of the camper so they clear the bikes. Since these Bargman taillights are LED lights and draw minimal power, we don't have any concerns about too much of a power draw on the system. We are not aware of any rules...
    view full answer...

  • Intermittent Fuse Failure With Left and Right Stop/Turn Signals With Bragman LED Tail Lights
  • For the Bargman LED # 47-84-610, each of the light housings for the LED lights has 16 LEDs so with the double tail lights each of these assemblies has 32 LEDs that illuminate. With high illumination this assembly would have a draw around .26 amps and at low illumination that draw would be about .02 amps. There is no reason with that low a draw that your 10 amp fuses would be failing, so you have a short somewhere in your wiring. I recommend using a circuit tester like # PTW2993 to...
    view full answer...

  • Will Bargman LED Double Tail Light # 47-84-610 Fit 2007 Jayco Travel Trailer
  • Trailer manufacturers use many different sized lights on their trailers and Jayco is no different. I can give you the dimensions of this light, and you can determine if this would be the right fit for your 2007 Fifth Wheel Jayco trailer. The Bargman LED Double Tail Light, part # 47-84-610, is a surface mount light. I have attached a photo of this light with the dimensions listed below. The base of the light is 10-1/4 inches by 7-1/4 inches, and 1-7/8 inches deep. Each lens is 4-1/8...
    view full answer...

  • Is Bargman LED Double Tail Light # 47-84-610 with Black Base Also Available with a Chrome Base
  • Yes, we offer the Bargman LED Double Red Tail Light with a chrome base. This version is part # 47-85-611. These Bargman products offers LED (light emitting diode) operation, which provides brighter light output, lower power consumption and a longer lifespan than typical incandescent bulbs.
    view full answer...

  • Can Bargman LED Surface Mount Light part # 47-84-610 be Used as Both a Left and Right Turn Signal
  • The Bargman LED Surface Mount Light part # 47-84-610 can be installed on either side of a trailer. It does not have a left or right side designation. Check out the review video I attached for more info as well.
    view full answer...

  • Does the Bargman Trailer Light # 47-84-610 Have Stop, Turn and Tail Light Functions
  • Yes, the Bargman Trailer Lights, item # 47-84-610, is a Stop, Tail, Turn Light.
    view full answer...


Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Lindsey S
Video Edited:
Jacob T
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Brian T
Installed by:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924