LED Double Trailer Tail Light - 4 Function - 18 Diodes - Colonial White Base - Red and Clear Lens

LED Double Trailer Tail Light - 4 Function - 18 Diodes - Colonial White Base - Red and Clear Lens

Item # 47-84-001

lowest price pledge

Retail:$51.19

Our Price: $30.80

You Save: 40%
Trailer Lights

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.29 lbs

Quantity: 
In Stock, Ships Today
Trailer Lights 47-84-001 - 10L x 7W Inch - Bargman
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Tail Lights
  • Rectangle
  • LED Light
  • Red and White
  • Recessed Mount
  • 10L x 7W Inch
  • Non-Submersible Lights
  • Bargman
  • Stop/Turn/Tail/Backup
  • Rear Reflector
9-13/16" x 6-15/16" Rectangle. Double LED trailer light serves 4 functions: brake, tail, turn, and incandescent backup. Built-in reflex reflector. Recessed mount. Pre-wired design. Lowest Prices for the best trailer lights from Bargman. LED Double Trailer Tail Light - 4 Function - 18 Diodes - Colonial White Base - Red and Clear Lens part number 47-84-001 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (214)
  • Q & A (1)
  • Videos (1)
  • Photos
  • Why etrailer?

Bargman Trailer Lights - 47-84-001

9-13/16" x 6-15/16" Rectangle. Double LED trailer light serves 4 functions: brake, tail, turn, and incandescent backup. Built-in reflex reflector. Recessed mount. Pre-wired design.


Features:

  • Double LED trailer light serves 4 functions
    • Stop, tail, and turn signal
    • Backup light with incandescent bulb
  • Built-in reflex reflector removes the need for a separate reflector
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Incandescent bulb for reverse light can be easily replaced
  • Stylish colonial white base has rounded corners
  • Durable ABS housing
  • Red lens over white LEDs
    • Clear lens over incandescent bulb
  • Recessed mount
    • Requires a 8-7/16" x 5-1/2" cutout
    • Tail light can be mounted vertically or horizontally
  • Pre-wired design - power and ground wires
  • DOT compliant
    • Meets FMVSS/CMVSS 108 requirements


Specs:

  • Dimensions: 9-13/16" long x 6-15/16" wide x 2-1/4" thick
  • Diodes: 18
  • 1-Year limited warranty


Bargman Series 84 LED Double Tail Light with Incandescent Bulb Diagram



47-84-001 Bargman LED Recessed Double Tail Light - 84, 85 Series - Stop, Tail, Turn - Incandescent Backup - 18 Diodes - Colonial White Base - Red/Clear Lens






California residents: click here


Video of LED Double Trailer Tail Light - 4 Function - 18 Diodes - Colonial White Base - Red and Clear Lens


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bargman Trailer Lights - Tail Lights - 47-84-001 Review

Today we're going to be taking a look at part number 47-84-001. This is the Bargman LED Taillight along with a Reverse Light, 84 and 85 Series. The two light fixture is going to function as a combination of brake, tail and turn signal light right here on this side. This side it has a clear lens with a built in red reflex reflective material that's going to indicate the reverse function. On this side here you're going to have LED's and on this side you're going to have an incandescent bulb. The LED's are going to last longer and burn brighter than incandescent systems. Low power consumption as compared to incandescent lights and quicker activation when compared to incandescent light. This light can be mounted horizontally or vertically. It's going to feature a stylish, colonial white base with rounded corners for a nice, sleek design.

Here on the back side it's going to have all the pre-wired designs. Your white wire is going to be your ground wire. The black wire on this side is going to be for the reverse light. The black wire on this side is going to be for your stop and turn signals. The green wire on this side is going to be for the taillight circuit. This is Department of Transportation compliant so it meets FMVSS/CMVSS 108 requirements.

If we take a look at the overall dimensions it's going to give us an overall length of 9-13/16". Overall width is going to give us a measurement of 6-15/16" and it's going to measure about 1-1/4" in thickness. This is a recessed mount so this portion here is going to be the recessed portion. The cutout dimensions need to measure 8-7/16" by 5-1/2". It's also got mount holes, two on this side, on each side, and then one on each side here.

The distance that we have between the mount holes going this direction is going to give us a measurement of 6-1/4". The distance between these right here is going to measure 4-1/4" and then center on center going this direction looks like it's going to measure about 9-1/4". We're going to go ahead and hook this up to our external power source that way you can see what it looks like with power running to it. Bargman does cover this with a limited life time warranty. We're going to go ahead and connect the ground wire, taillight circuit, and our stop and turn signal. This is going to be the taillight function of the light.

You can see that the LED's send out a nice, consistent signal and then when we apply our brakes it illuminates for a brighter signal output, also functioning as our turn signal. Now I'll go ahead and connect the reverse light, as you can see when we activate the reverse function it sends out a nice, consistent signal as well. Nice, bright, white light. Again the reverse light is going to be an incandescent bulb. The taillight, stop and turn signal is going to be your LED system. That's going to do it for today's review of part number 47-84-001. This is the Bargman LED Double Light 84 and 85 Series. .


Customer Reviews

LED Double Trailer Tail Light - 4 Function - 18 Diodes - Colonial White Base - Red and Clear Lens - 47-84-001

Average Customer Rating:  4.8 out of 5 stars   (214 Customer Reviews)

9-13/16" x 6-15/16" Rectangle. Double LED trailer light serves 4 functions: brake, tail, turn, and incandescent backup. Built-in reflex reflector. Recessed mount. Pre-wired design.

- 47-84-001
by:

Always great Parts always shipped fast day A+ 658335



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


lights up / brake lights light up turn signals flash. Noah was the service rep he did very well with info. Shipment was quick and accurate. 639665



- 47-85-004
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


This is one of the best upgrades I've made. They are much brighter and come on much faster than the former incandescent bulb fixtures. 246501



- 47-85-004
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


The product was exactly what I expected but the service exceeded my wildest expectation. The confirmation email as well as the shipping status emails were very timely and personalized to make me feel like I am a customer, a valued customer. etailer has definitely earned me as a customer for the foreseeable future. 141807



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


I got them put on my 2014 forest River and it a wow how much better it light up at night !!! LOVE THEM !!! Paul 273880



- 47-85-004
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Tail lights worked great. Going to be ordering springs for another trailer soon. 657644



- 47-85-004
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


lights are to replace my old lights in my horse trailer, because I had to mount them vertical, the problem is the way that the frame is may ,will not allow water to drain out , the backup light is not seal from the back so this lets to collect dust/water inside of the light lens my fenders are where the lights are mounted and only has a plate to defect rocks and mud from the lights, I did have to widening the frame where my old lights mounting , notice that there is not much room for the bolts holes has to be kept close 577881



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Just got around to installing the new Bargman tail lights on my 1995 Dolphin motor home. The turn signals flash very rapid and I believe I would need to install a resistor to cure this. Can you point me in the right direction ??? 597895


Comments

Yes you will need load resistors, one for each turn signal circuit. I recommend part P230004A-2.

-- Heather A - 01/16/2019

48622

- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Haven't installed the tail lights yet but they look to be exact replacements to the original equipment on our 1993 motorhome. I did remove one of the lights from the motorhome to check fitment and the wiring is very straight forward so should be an easy upgrade. The only issue is the gasket material behind the original lights is shot and there were not new gaskets that came with the lights. A quick check on the etrailer.com website did not find any replacement gaskets - didn't see any on the Bargman website either. No luck finding gasket material at a hardware store or several auto parts stores so will have to jury-rig something. 268669


Comments

Thanks for the followup. Truth be told I just installed the tail lights over the past holiday weekend. Last year was a rush to get things packed up for a move from Minnesota to Colorado and Im just now getting the RV ready for a trip. Installation was easy and the tail lightbrake light/turn signal are definitely brighter than the original ones. The only issue is I think I need to get a different blinker unit as the turn signals act like there is a bulb burned out they blink really fast. Probably because of the lower power usage of the LED lights. As I mentioned in my review there wasnt any gasket material for the lights so I used an old truck tire inner tube to make gaskets to better seal the units to the body of the RV.

PJ - 07/17/2017

26247

This a common issue when installing LED lights, and is known as hyper flashing. It occurs since your LED lights do not have enough draw to activate the circuit. To solve this problem load resistors like part # P230004A-2
Putco LED Light Bulb Load-Resistors - Aluminum - Qty 2
$31.84
can be installed, they increase the amperage draw on a circuit. You would need one per affected circuit (likely just the blinker circuit in your case), and I have linked a kit 2 for your reference. Additionally, there are a couple of types of load resistors, and the aluminum versions are recommended because they dissipate the heat that builds up from the added resistance.

-- Rachael H - 7/18/2017


- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


This is a high quality light, and even brighter than I expected. There was a problem with some rough handling during shipping, and the folks at etrailer took very good care of me and corrected the situation about as quickly and professionally as I could imagine. Very impressive. I will be back to shop here again. 198086



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Great Product. Easy replacement for older RVs to upgrade to LED. You will need load resisters to prevent hyperflash turn signals. No biggie. Very bright and really quick shippers here. 129802


Comments

Where are the load resisters purchased from and what is the load of the resister?

-- comment by: Steven R - 10/27/2014

7463

The load resistors that we currently have are the Aluminum version 2 pack # P230004A-2
Putco LED Light Bulb Load-Resistors - Aluminum - Qty 2
$31.84
and the Ceramic 2 pack version # P230004C-2
Putco LED Light Bulb Load-Resistors - Ceramic - Qty 2
$20.72
both of which have a provide a resistance of 6 ohms.

-- Rachael H - 10/29/2014

Comments

How many load resistors do you need for each unit?

-- comment by: Glen - 08/02/2015

13815

- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


No gasket to keep water out of back- up light assembly. I have had to remove the lens and dry the inside several times. Also, I had to install resistors to correct the rapid flash error as these are LEDs and previous assembly was incandescent. Overall they are nice and bright. 607534



- 47-85-611
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


This is a great tail light assembly. The LED lights are much brighter than my old lights. The only thing I didn't care for was that I had to drill 12 more holes in the exterior skin of my trailer. This light is bigger than the old ones and the hole pattern did not match. Because this light assembly is larger, I was able to cover the old holes with this assembly. The wiring connection was very simple and straight forward. On the back of this assembly was the color pattern for each wire. Overall, I'm very satisfied. 157978


Comments

Still 100 satisfied

Roy - 10/26/2015

15682

- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


The backup light on my RV went out. The problem was a rusted bulb socket. I would have to replace the whole tail/backup/brake assembly. SO......I decided to "go LED" and order the Bargman Triple Tail Light 84 series from etrailer. The order was processed and delivered quickly. There was a bit of work to modify the existing cutout to accept the new Bargman Triple Tail Light. But I think it was worth it. I also installed the LED Backup Light Upgrade Kit to the Triple Tail Light. These really look good on the MotorHome and I should not have to work on them again. The picture shows the old and the new installed for comparison. 479787



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Fantastic lights! Very bright! 384733



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


We have an older camper that we wanted to update the taillights on. We bought the resistor's in case of hyperflash, but didn't need them. We LOVE the difference in the lights! We had no issues with replacing the lights, the dimensions were a perfect fit! 541579



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Great product, it came a couple of days ago. It was packaged perfectly, no damage, but the box looked like it had been used in a Samsonite Commercial on television! 394932


Comments

They work perfectly. If you remember the Samsonite Commercials on the Television in the 60s and 70s thats how the box looked like the gorrial in the commercial had used it to reverse the commercial. The lights work perfectly

PatrickA51 - 06/16/2018

39839

- 47-85-002
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Good looking light, replaced on 2012 coachman rv,original lights worked when they wanted to, causing a very unsafe condition.The video you have made it a easier to measure and mount. I did have to cut the opening 1/8 of an inch wider, but that was an easy fix.I am sending pics of before and after. WHAT A DIFFERENCE! The lights are very bright, great product. Thank You for the help, and quality service. 549322



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


I first ordered and didn't realize they were sold individually. So I did order another one. They are a replacement for the original style lights that were not LED. They fit perfectly and are really bright. I soldered and heat shrinked all the wiring and installed butyl tape when I installed them. I did order the metal resistors so that I didn't have the hyper flash. They renew the look of an older RV. The shipping was two days and I loved that. 463336


Comments

Still working as advertised and would still recommend them. Excellent product.

Hoppers - 12/29/2018

48077

- 47-84-530
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


These tail lights are a direct-fit replacement for the original lights on my 1990 Winnebago Warrior. I originally attempted to order the version with an amber center light (similar to originals) but that model is discontinued since modern vehicles no longer have amber lights on the back. It took me a couple of minutes to figure out what to do with the extra wires (the old fixture had a single hot wire and a common ground where each of the two LED lamps in the new fixture have two hot wires and a separate ground) but the wire key (molded into the back of the LEDs) proved helpful and I worked it out just fine. 242066



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Replaced all of the old incandescent tail and third brake lights on the rear of my old trailer. The installation was easy and only took a couple of hours. All the mounting holes lined up and it was a direct replacement. The trailer is considerably brighter now with 1/4th of the current drain. Now the trailer lights up like the Christmas Coca-Cola trucks. Trailer is much more visible at night and in the daytime making traveling much safer. I would recommend this upgrade for anyone having older trailers with the incandescent lighting. 242979



- 47-85-611
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


So far these led flush mount lights are working great. They're bright and a refreshing update over old incondesant lights. I got these to put on an older camper I purshased. From the photos you can see what was on the camper and I what I upgraded to. The old lights were dull and could barely tell they were lit. These lights bring a modern day update to an 1989 camper. Besides the product being good the shipping was fast and free. And I also like that on ETrailers site when your package is in transit they have a map of the US showing where your package is. 425485



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


The fit was very good. But the screw tabs are not as robust as the originals, both lens cracked one pretty easy when sealing the fixture against the surface. Be very careful pushing the light firmly as you tighten the screws just enough to make a seal. Also, it comes with no seal requiring use of a sealing material, I believe this is pretty standard though. They are bright and operated perfectly. Used on a 1997 coachman leprechaun 30’. 600982



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Upgrade Trailex incandescent fixtures with these LEDs. Much much brighter and takes vibration and moisture in the elements without "burnt out bulbs". A great upgrade. Depending on tow vehicle, switching to LCDs may require additional "load" in the wiring to prevent "burnet out" bulb warning in tow vehicle. 396913


Comments

Thanks for your business and review. You are correct about upgrading from incandescent to LED lights. You can install load resistors, P230004A-2, on the trailer wiring. As recommended by the manufacturer, the load resistors will need to be installed inline with each circuit. These will provide more draw on the system and the vehicle will not activate the bulb out sensor.For your convenience, I have included a link to the product page and a trailer wiring help article.

-- Laura E - 06/26/2017

25472

- 47-84-103
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


The LED Taillight is a direct replacement for my 2002 E350 Ford motor home. even the mounting holes matched. the only issue I had was there was no rubber gasket seal included. I reused the gasket from the old lights. Also do not use the Electronic LED Flasher from Supper Bright LED it pop fuses. 720054



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Your product fit perfectly. The only suggestion that I would is design a gasket for the taillights to seal from water getting in the back of the unit. 719306



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Works great! 718778



- 47-85-002
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Here is a photo of the completed tailli ghts. 718553



- 47-84-530
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Great product, fit perfectly into my application. Ordered, shipped and received in a timely manner without any hassles. Will order from them again. 714634



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


This light from Bargman is exactly what I was looking for as a direct replacement for my Haulmark enclosed car trailer. I wanted to switch all the lights on the trailer over to LED's and these lights fit the exact dimensions I needed. The lights are built well, illuminate brightly and all the wiring is clearly marked. Very happy with this product and Etrailer !!!! 708427



- 47-85-004
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Great product came as advertised, shipped on time,fit perfectly! Retailer is a pleasure to do business with. I will purchase other items in the future. Thanks. MUCH BRIGHTER THAN INCANDESCENT!!!! 705999



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Bargman 84/85 Series Trailer Light. I installed these on my 2004 Ford F350 Motor home.These tail lights are a perfect match for what I had. ( None LED). On these new lights the back-up lights are not Led. So I installed Led bulbs in them. At first I thought they were not going to work. Hyper-Flashing! This was a easy fix. replaced Flasher with a Led-Flasher. One other small problem ( another easy-fix). Back-up lights water got in. I sealed the lens with clear automotive clear silicone. I`ve used my RV all Summer an I`ve had no problems, they work perfect. My old light were not Led. These are so bright. And now I feel safe knowing others can see me. Thanks etrailer! Great replacement part. 699498



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Arrived on time, packaged securely, lights are exactly as pictured. Super easy to install, on an older Lance Squire, took about 5 minutes per light. Very bright LEDs! 699087



- 47-84-527
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


I bought these to replace the old style tail lights on my motorcycle trailer. We gotta ride safe and be seen, especially when you have a trailer attached to the back of your bike. These fit the existing opening perfectly and are brighter than the old lights. My one & only regret is both sides of the light are red, I wish one side was amber for the turn signal. My old lights are that way and I think red/amber LEDs would be even better than these. I'll keep watching etrailer and hope the manufacturer will act on my suggestion. 696864



- 47-84-527
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


These tail lights are very bright which is good. However, I have had to replace the one side of the lights left and right sides of the vehicle two times after 2-3 years use due to the LED's not all working. 695727



- 47-84-527
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


nice upgrade for an old trailer with holes already in rear doors easy swap all existing holes lined up. Very bright 695466



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Once again etrailer provided perfect service!!! Their prices are great and shipping is super fast. On top of that, their customer service and technical support is second to none. I have been a long time customer and have never been disappointed. I had already purchased two of these taillights awhile back to replace the old incandescent taillights on my truck camper. I needed another to mount on a storage box, that I am mounting on the back of my truck camper, since storage box is going to cover the camper's existing taillight. These led taillights are a vast improvement over the the old ones!!! Much brighter and gives our rv a more modern, updated look. 695204



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Just what I wanted! 694211



- 47-85-004
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Great fit and finish. Mounted in same location as old Bergman lights on motor home. Wiring straight forward. I used close end butt connectors, well crimped - no problem. 686540



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Great product, arrived on time. Fit perfectly on my trailer. 683948



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Received the lights in good time and installed without any problems. Very happy. 683065



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


I had an excellent experience with Etrailer, I received what I needed in a timely fashion and it is what I require. I had expert help in finding what I required and good follow-up. Thanks! 682708



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Ordered the LED lights for my 1989 Avion travel trailer. It has a housing that it must fit perfectly which it did. I wanted brighter lights which these new lights provided. [other on-line retailer] lights were more money and etrailer was very fast on the delivery. You need lights for your trailer...this is the place. 679954



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


exact replacement for my 1995 Southwind Storm motorhome. Replaced old corroded bulb sockets, with new state of the art LEDs. Very easy replacement. 675099



- 47-84-527
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


I've had these lights on my trailer for a year and they still work great. Very bright and low current draw. Definitely worth the upgrade. 674696



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


I'm very satisfied with my Bargman LED 84/85 Series trailer light. They are super bright and easy install. I've had them installed on my '94 class C RV for over a year and they are still as bright as the day I installed them. Since my current tail light assembly was same 84/85 series but incandescent and this LED Kit was an upgrade same series it was a direct fit. However since my vehicle was originally set up with incandescent bulbs front and back and now has the LED rear I had to replace vehicle's flasher relay to get rid of Hyper flash/bulb out fast blink indication. Now it flashes like it did before the replacement and I don't ever have to worry about corrosion on socket or bulb out again for a long time. Trip to Oreilly auto parts and under $4 for the upgraded flasher relay that handles both LED and incandescent lights in same circuit and hyper flash is gone. Other reviews suggested installing load resistors but there are 2 reasons why I didn't do that. Reason 1) load resistors get hot, by nature resistors resist current (hence their name) but get hot its same thing a light bulb does but we use that heat to create light by heating up filament that glows. I didn't have anything to mount the load resistors to but wood and didn't want to set my coach on fire. Reason 2) LED are low power draw on circuit and only require .5 volt to operate. I didn't want to load down my vehicles alternator unnecessarily by throwing in 6 large resistors (since I have 2 triple tail light assemblies it would require 6 resistors) that do nothing more than electrically slow down or throttle down current flow. The other thing extra resistance does in the circuit is to dim lights because there's less current flowing through the light filament it won't glow as bright because there's less current flow than before. I didn't want to spend money to dim the lights that I spent extra money to make them brighter and therefore more noticeable for the brainless, texting, snot tailgating me to not see when I put on the brakes. I hope this quick electrical 101 lesson helps others in their decision since none of the reviews mentioned upgrading the flasher relay too. 672355



- 30-85-002
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Thank you its exactly what was shown in the picture...thanks 668261



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


The LED taillights arrived in very good time and were in good condition. Easy install, and the lights on the camper work well and are much brighter and easy to see than the old incandescent lights. I have bought a couple items from Etrailer and the website and service has been good each time. It's a pleasure dealing with this company. 662495



- 47-84-009
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


Perfect replacement for the older regular bulbs style. 655520



- 47-84-008
by:

Review from a similar Bargman 84/85 Series in Trailer Lights


The product came very quickly,and packed very well. Very happy with the service and products they offer. Looking forward to getting the new lights installed. 654965


53
218
Show More Reviews

Ask the Experts about this Bargman Trailer Lights

Do you have a question about this Trailer Light?


  • Difference Between Bargman 47-84-001 and Bargman 47-84-540 Double Tail Lights
  • I went out to our warehouse to take a look at both the Bargman LED Double Tail Light # 47-84-001 and # 47-84-540 referenced in your question. I found that these two units do in fact share identical dimensions and mounting hole patterns. They are both 9-13/16 inches long, 6-15/16 inches wide and 1-1/4 inches thick. They both have a cutout dimension of 8-7/16 inches x 5-1/2 inches. In terms of their size and mounting dimensions, these units are identical When comparing the two items,...
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924