Bargman LED Trailer Clearance or Side Marker Light - 4 Diodes - Rectangle - Amber Lens

Bargman LED Trailer Clearance or Side Marker Light - 4 Diodes - Rectangle - Amber Lens

Item # 47-58-032

lowest price pledge

Retail:$30.37

Our Price: $18.58

You Save: 39%
Trailer Lights

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.17 lbs

Quantity: 
Trailer Lights 47-58-032 - Non-Submersible Lights - Bargman
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Surface mount to trailer - hardware not included. 2-Wire harness plugs into back of light. P2 rated. Lowest Prices for the best trailer lights from Bargman. Bargman LED Trailer Clearance or Side Marker Light - 4 Diodes - Rectangle - Amber Lens part number 47-58-032 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (4)
  • Q & A (2)
  • Videos (2)
  • Photos
  • Why etrailer?

Bargman Trailer Lights - 47-58-032

  • Clearance Lights
  • Rectangle
  • LED Light
  • Amber
  • Surface Mount
  • 4L x 2W Inch
  • Non-Submersible Lights
  • Bargman

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Surface mount to trailer - hardware not included. 2-Wire harness plugs into back of light. P2 rated.


Features:

  • Rectangular LED trailer light functions as a clearance light or a side marker when properly mounted
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Amber lens over white LEDs
  • Compatible with 12V DC electrical systems
  • Surface mounts to trailer - hardware not included
  • 2-Wire harness plugs into back of light
  • DOT compliant
  • P2 rated


Specs:

  • Dimensions: 4" long x 2" wide x 1-1/4" thick
  • Distance between mounting holes (center on center): 3"
  • Diodes: 4
  • 1-Year limited warranty


Bragman 58 Series Amber LED Trailer Clearance Marker Light Dimensions

P2-Rated Lights

Diagram of light spread for P2 rated light

A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.



4758032 Bargman 58 Series LED Clearance or Side Marker Trailer Light with 2-Wire Pigtail - 4 Diodes - Rectangle - Amber Lens - P2 Rated






California residents: click here


Video of Bargman LED Trailer Clearance or Side Marker Light - 4 Diodes - Rectangle - Amber Lens


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bargman LED Trailer Clearance or Side Marker Light Installation

Today we're going to be taking a look at the Bargman LED Clearance Side Marker light with pigtail and amber, part number 47-58-032.Here's what our light looks like once we have it installed. You can see that the LEDs are going to provide a real crisp bright light compared to incandescent bulbs. They're also going to last up to 50 times longer, and take less energy to power them up. Our light's going to make a great replacement if your old one is broken, or if the filaments on the inside of your incandescent light burnt out. With the overhead lights off, you can see just how bright these marker lights are going to be. There's not going to be any doubt that people are going to be able to see our trailer when we're going down the road at night.Our light's going to measure four inches long by two inches tall, and it is going to have a pigtail included on the back for easy wiring.

We'll have one power and one ground wire.Now that we've seen our light and gone over some of the features, let's show you how to get it hooked up. We can grab our new light, and to figure out the spacing on our mounting holes we're going to have to pop the amber lens off. You can just take a flathead screwdriver, come between the housing and the lens, and it'll pop right out. Now we already have two holes drilled out for our application, but if you don't, you can just use a marker. Point them through.

That'll give you the spacing you need to mount it up.On the back we're going to have two wires. One's going to have a ring terminal. That's going to be our ground wire. Then the black wire is going to tie into our tail light circuit, which we already have ran out here. I'm going to go ahead and trim this back, since we don't need all of this wire.

I'll strip back the end of the wire. We can take a butt connector. Since this is going to be on the outside I'm going to use a heat shrink butt connector to help prevent any kind of moisture and corrosion from building up on the inside.We'll crimp one wire on. We're going to grab the black wire on the back of our light, slide it into the other end of our butt connector. We can crimp it in place.

You're going to want to apply some heat to your butt connector to shrink it down. Now if you're using an open flame, you want to be extra careful not to burn or char the connector.I'll slide my ring terminal around the self tapping screw. Make sure it's nice and secure. Then I'm going to bundle up all my wires behind the light here. We'll have plenty of room to have everything tucked behind the bezel. Now our kit's not going to come with hardware, so you just want to make sure you find hardware that's going to fit, and that it's going to go all the way through to the other side. I'll put my hardware in. Then I'm going to put some nuts on the back to secure everything down. Once you have your light nice and secure and all wired up, we can take our cover and snap it back into place.That'll finish up your look at the Bargman Amber LED Clearance Side Marker light with pigtail, part number 47-58-032.


Customer Reviews

Bargman LED Trailer Clearance or Side Marker Light - 4 Diodes - Rectangle - Amber Lens - 47-58-032

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Surface mount to trailer - hardware not included. 2-Wire harness plugs into back of light. P2 rated.

- 47-58-032
by:

Great product, great selection, great service - my order arrived in 2 days. My only suggestion is to offer weatherproof gaskets that can be used with these items. I found 1/8" gasket material and will make my own, but it is an opportunity to offer a complete solution. I'm 100% satisfied! Thank you! 670582



- 47-58-032
by:

Easy to replace the incandescent marker lamps that were there. Very bright leds. Trailer looks great at night and will be safer b 636759



- 47-58-032
by:

Great product!!!!! 207022



- 47-58-032
by:

These clearance lights were a perfect fit for my 1991 Toyota Winnebago motorhome. The LEDs are quite a bit brighter than the original incandescents. Emails to etrailer were answered quickly and the employees were very friendly and helpful. Glad I found this company. I'm sure I will be using them in the future! 179592


4
4

Ask the Experts about this Bargman Trailer Lights

Do you have a question about this Trailer Light?



Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Adam R
Updated by:
Laura H
Updated by:
Brian T
Installed by:
Cole B
Installed by:
Robert C
Video Edited:
Chris R
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924