1. Trailer Lights
  2. Bargman
  3. Tail Lights
  4. Rectangle
  5. Incandescent Light
  6. Red
Bargman Trailer Tail Light - 4 Function - Incandescent - Rectangle - Black Base - Red Lens

Bargman Trailer Tail Light - 4 Function - Incandescent - Rectangle - Black Base - Red Lens

lowest price pledge
Retail:$30.92
Our Price: $18.80
You Save: 39%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.69 lbs
Quantity: 
Trailer Lights 30-92-106 - Incandescent Light - Bargman
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
8-9/16" x 4-9/16" Rectangle. Incandescent trailer tail light provides stop, tail, rear reflex, and turn signal. Corrosion resistant bulb sockets. Durable ABS housing. Surface mount - hardware not included. 3-Wire design. (1) 1157 bulb. Lowest Prices for the best trailer lights from Bargman. Bargman Trailer Tail Light - 4 Function - Incandescent - Rectangle - Black Base - Red Lens part number 30-92-106 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (860)
  • Q & A (25)
  • Photos
  • Why etrailer?

Bargman Trailer Lights

  • Tail Lights
  • Rectangle
  • Incandescent Light
  • Red
  • 8-1/2L x 4-1/2W Inch
  • Surface Mount
  • Stop/Turn/Tail
  • Rear Reflector
  • Non-Submersible Lights
  • Bargman

8-9/16" x 4-9/16" Rectangle. Incandescent trailer tail light provides stop, tail, rear reflex, and turn signal. Corrosion resistant bulb sockets. Durable ABS housing. Surface mount - hardware not included. 3-Wire design. (1) 1157 bulb.


Features:

  • Incandescent trailer tail light serves 4 functions:
    • Stop, tail, rear reflex, and turn signal
    • Built-in reflex reflector removes the need for a separate reflector
  • Radius styling provides a smooth look with rounded edges
  • Corrosion-resistant bulb sockets protects bulb
  • Incandescent bulb can be easily replaced
  • Durable black ABS plastic housing
  • Red lens covers bulb
  • Compatible with 12V DC systems
  • Surface mount to trailer - hardware not included
  • 3-Wire design includes power leads and ground wire
  • DOT compliant
    • Meets FMVSS/CMVSS 108 requirements


Specs:

  • Dimensions: 8-9/16" wide x 4-9/16" tall x 2-1/8" thick
  • Number of bulbs: 1
  • Bulb type: 1157
  • Power draw at 12V:
    • Stop/turn: 2.1 amps
    • Tail: 0.59 amps
  • Wire length: 7"
  • Wire gauge: 16
  • 1-Year limited warranty


Bargman 30-92-106 Single Tail Light Dimensions

Surface-Mount Light

Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.



30-92-106 Bargman 92 Series Incandescent Trailer Tail Light - Stop, Turn, Tail - Rectangle - Black Base - Red Lens - Surface Mount

Item # 30-92-106




California residents: click here



Customer Reviews

Bargman Trailer Tail Light - 4 Function - Incandescent - Rectangle - Black Base - Red Lens - 30-92-106

Average Customer Rating:  4.9 out of 5 stars   (860 Customer Reviews)

8-9/16" x 4-9/16" Rectangle. Incandescent trailer tail light provides stop, tail, rear reflex, and turn signal. Corrosion resistant bulb sockets. Durable ABS housing. Surface mount - hardware not included. 3-Wire design. (1) 1157 bulb.

- 30-92-106
by:

As far as customer service and product quality I would actually give you five Stars. However because of the difficulty with the shipping with UPS I dropped it down a star. While you were kind enough to give me expedited shipping with no extra charge UPS lost the original shipment and I had to have it read shipped after 8 days of them looking for the Lost shipment. So it made complications in the trip I was going to take with my grandchildren and we ended up not being able to take our trip. I've had nothing but problems with UPS and would never use them for shipping. But thank you for the great customer service and I'm very happy with the product and quality versus price. I would recommend purchasing from you guys I just wish you would use someone else for shipping.


Comments
Well it has been a year and I have to say these lights of held up really well under the harsh summer heat out here in the desert. No sign of warpage or discoloration or fogginess. Im very pleased
Thomas E - 12/01/2020


- 30-92-106
by:

Perfect replacement for 2019 Keystone Sprinter Limited fifth wheel, easy install.



- 30-92-106
by:

Great service always and competitive prices. Replacing broken lights on an enclosed trailer.



- 30-92-106
by:

Great replacement for the factory light. It matches the other one perfectly.



- 30-92-106
by:

Replacement tail light for 2001 Coleman Mesa pop up trailer. Easy to find one trailer and just as easy to order. I wish I found etrailer years ago.


Comments
I recently sold my trailer but had no issues with the part I purchased.
Timothy - 06/09/2020


- 30-92-106
by:

eTrailer.com had largest selection and best price and availability when I needed to replace a tail light on my 30 year old popup camper. The product was exactly as advertised and simple to install. eTrailer.com is my first stop for trailer parts and accessories.



- 30-92-106
by:

It works as it should and shipping was pretty quick. Would order again from retailer



- 30-92-106
by:

Perfect replacement and great to find theses with the black base witch is hard to find. And put led bulbs for a really nice look. Vary happy



- 30-92-106
by:

They are very nice lights and they fix very nice!



- 30-92-106
by:

Delivery was prompt and fast exactly what I ordered thanks will recommend you and I will be using you more often



- 30-92-106
by:

I also added LED bulb to it, which made even more clear and brighter.



- 30-92-106
by:

Everything came quickly and was easy to install!



- 30-92-106
by:

Good light for the money. It has been working for a year now



- 30-92-106
by:

Screw holes lined up exactly. A perfect fit.



- 30-92-106
by:

This turned out to be EXACTLY what I needed to replace the non-functioning corroded taillights on my 2010 Coleman Pop Up Camper!!!! My husband, my Master Electrician, installed them for me in about 20 minutes (including the time to remove the old rivets). Shipping time was amazingly fast! Now, everyone behind me will know, when I know, where I am going!!!! I am Considering replacing the current light bulbs with LED ones.



- 30-92-106
by:

Excellent product



- 30-92-106
by:

One of my tail light lenses fell off my trailer, and for a while, I duct taped red plastic on it. The plastic started to rip and get holes in it, so I looked around for another lense. I found this one on etrailer. The dimensions sounded like it would fit. I had to buy the entire fixture, not just the lense, but it wasn't too expensive. The lense fit perfectly, and I have an extra fixture if I need one.



- 30-92-106
by:

Etrailer did a great job. The shopping experience on the website was easy to navigate. My package arrived quickly and in very good condition. The trailer tail lights were easy to install and worked well as designed. I will be placing an order soon for some replacement running lights. Thanks again for the great service.


Comments
I was pleased with everything about the transaction. the replacement went pretty smooth.
Rich M - 05/19/2015



- 30-92-106
by:

Unable to give fair review at this time due to wrong product was sent. The low rating is due to the fact I have to wait until July 5 at best to get the correct product. Was told "there is nothing I can do" to get it here quicker. I personally feel priority shipping would not have been out of line at this point for "customer satisfaction"?



- 30-92-106
by:

Needed to replace all of my rear tail lights. etrailer had what I needed in stock, the price was right and the delivery was quick and on time.



- 30-92-106
by:

Perfect replacement parts for my 2003 22’ Hi-Lo! Attachment holes matched perfectly on the trailer! Fast delivery! It even included light bulbs!



- 30-92-106
by:

Fast shipping! Thanks for having what I needed.



- 30-92-106
by:

Perfect fit as replacement for taillights on my 2002 Winnebago Adventure. Only one small issue, had to file slight flashing on one of the holes to fit existing mounting tabs. Fit was nice and tight compared to the old cracked lenses replaced.



- 30-92-106
by:

The product arrived on the day it was expected. It appears to be well made. I installed it without any problems. As other people had previously noted, the light bulb is dimmer than idea. I will attempt to replace the it (bulb 1157) with a suitable LED.



- 30-92-106
by:

I have an old camp trailer that I'm refurbishing so I ordered new taillights for it. The price was great and the lights were everything I hoped they would be. They installed perfectly and look great.


28
873
Show More Reviews

Ask the Experts about this Bargman Trailer Lights

  • Replacement Tail Lights for 1969 Avion Agronaut with Dietz 160 Series Tail Lights
    I'll start off by saying that I don't believe that Dietz is still in business, so finding new parts may be a challenge. With that said, the Bargman # 30-92-106 light you were looking at is a great choice and can be used on the passenger side of your 1969 Avion Argonaut. For the driver's side you can use the Bargman Tail Light w/ License Bracket - 5 Function - Incandescent - Black Base - Red/Clear Lens # 30-92-108 which comes with the license plate bracket. This pair of lights would give...
    view full answer...
    Image 1 for
  • Replacement Taillights for 1999 Flagstaff 176LTD Pop-Up Camper
    Thanks for the picture of the light assembly you are wanting to replace. Based on that the # 30-92-106 would be the best option. The bolt hole dimensions are slightly different though so you'll have to drill new holes. There isn't a replacement at this time that uses same bolt patterns.
    view full answer...
    Image 1 for
  • Dimensions of Bargman Series 92 Lamp Part # 30-92-106
    The Bargman 92 Series lamp, part # 30-92-106 measures 8-9/16 long by 4-9/16 tall by 2-1/8 inches thick, as you can see in the photo I've edited for you.
    view full answer...
    Image 1 for
  • Need Replacement Rectangular Tail Light for 1976 Prowler Pull Camper
    I was able to find photos online that show a 1976 Prowler trailer and its tail lights, which are rectangular in shape and which appear to be roughly 8 x 4 inches in size. We do offer a number of Bargman replacement trailer lights but nothing that exactly matches the reference numbers you provided (thank you for those). This is not too surprising given the age of the trailer; manufacturers like Bargman may no longer offer the exact lights they did back in the 70s. However, if you review...
    view full answer...
  • Replacement Tail Light For 1993 Popup Camper
    We have several tail lights for a camper that have the dimension you mentioned. The number you furnished is the Department Of Transportation number for the lens and is not the number of the light assembly itself. I have attached a link to our product page for the tail lights we offer that might work well on your camper. One light that may work well for you is the Bargman Surface Mount Tail Light, part # 30-92-106. This light measures 8-9/16 inches long x 4-9/16 inches wide x 2-1/8 inches...
    view full answer...
  • Installing New 3-Wire Lights to Fire Truck
    Most likely on your new round light assembly the red wire will go to the brake/turn light circuit on the fire truck and the black wire will be for the running lights circuit. The white wire is for ground. It looks like the old light assembly grounded through its mounting hardware, which is why it didn't have a separate white wire. On the new light the white wire just needs to be secured to a clean, bare metal surface to complete the ground.
    view full answer...
    Image 1 for
  • Availability of Replacement LED Type Tail Light to Fit in Place of Bargman 92-Series Incandescent
    My technical contact at Bargman confirmed that there are no direct drop-in LED equivalents to their 92 Series that would allow you to use the same mounting points. He suggested their 84 Series and the 07 Series which you reviewed. I have included a link to our main page for LED-type trailer lighting; you can use the filters at the left-hand margin to narrow the results to those lights that best meet your requirements.
    view full answer...
  • Mounting Hole Spacing for Bargman Surface Mount Tail Light # 30-92-106
    The distance between the mounting holes on the Bargman Surface Mount Tail Light, # 30-92-106, from left to right measure 7-1/8 inches and 3 inches top to bottom. I have attached a picture to illustrate these measurements.
    view full answer...
    Image 1 for
  • Troubleshooting Tail Lights Not Working with Running Lights On
    It sounds like all the lights on your RV/camper work fine on their own but when you turn the running lights on the turn or brake lights don't work. If this is correct then you most likely have a weak or bad ground connection. Typically a weak ground shows itself when more power demand is necessary such as multiple functions being powered at the same time. Check to make sure the main trailer ground is connected to a clean, bare metal surface that's free of any debris or corrosion. Also...
    view full answer...
  • What bulb is needed for the Bargman 30-92-106 tail lights?
    The Tail light bulb type needed for the Bargman Surface Mount Tail Light - 92 Series, # 30-92-106, is a 1157 double filament bulb. We have the Replacement Light Bulb # 1157, they are part # A1157B. For an LED replacement, the 1157 LED Bulb # DI52VR, is a great option that has 21 LEDs and a brightness of 210 lumens. If you want a red bulb so it doesn't wash out your lens, you can use the Putco PURE Premium 1157 LED Bulbs - 360 Degree - Red - 2 Pack # P231157R360.
    view full answer...
  • Installing New LED Lights with Unknown Wire Functions to Trailer
    Without knowing the specific brand/model of your LED lights it's hard for me to verify the function of the 3 wires you mentioned as different manufacturers will use different colors, however most likely the red is for brake/turn and the black is for running lights. To ensure you make the correct connections on the trailer I recommend testing the wires for function by applying 12V power to them to see what they each activate. With typical trailer wiring the green wire is for right turn/stop...
    view full answer...
  • Bargman Trailer Tail Light White Ground Wire Attaches to Metal Surface
    Yes, you are exactly right. The white ground wire on tail light # 30-92-106 will have to connect to a metal surface. If you need to extend the wire to the frame of the trailer that is permissible. Make sure it is attached to a clean and corrosion free bare metal surface.
    view full answer...
  • How To Find Correct Replacement Tail Light for Keystone Bullet Trailer
    The only way part numbers can be used to find the correct replacement tail lights for a trailer is when you pull them from the base of the light and not the lens. That said, this is typically not how we recommend finding the correct replacements anyhow, we recommend simply measuring the light and noting its shape. You may have to drill a few new holes for mounting but that's pretty standard procedure. Just fill the old holes with silicon and there will be no harm done. They will likely...
    view full answer...
  • Replacement Lens for 1996 Jayco Tent Trailer Tail Lights
    I looked up your 1996 Jayco Tent Trailer and think I may have found the correct tail lights for you but the number you furnished is the Department Of Transportation number for the lens and is not the number of the light assembly itself. One lens that may work well for you is the # 30-92-012 for Bargman Surface Mount Tail Light, part # 30-92-106. This light measures 8-9/16 inches long x 4-9/16 inches wide x 2-1/8 inches thick. This light would be used on the passenger side of the trailer....
    view full answer...
  • Replacement Taillight Recommendation for 2003 Forest River Flagstaff 208
    We have just what you need. For the version of the Bargman 94 Series light that has the license plate bracket and light you'd want the part # 30-92-108. For the version that does not have either of those you'd want # 30-92-106.
    view full answer...
  • LED Version of Bargman Series 94 Taillights on Trailer
    What you'd need is the part # 30-92-106 and # 30-92-108 which is the matching assembly as what you have and then for converting them to LED you'd need the part # P241156R-360.
    view full answer...
  • Replacement Tail Light Lens for a 2003 Coleman Niagra Pop-up Camper Trailer
    It sounds like replacement lens # 30-92-012 is a close match for your 2003 Coleman Niagra trailer. The lens measures 8-9/16 inches by 4-9/16 inches by 2-1/8 inches. The length and height are only 1/16 inches off and the depth only 1/8 from your measurements. The lens fits Bargman 92 series tail light # 30-92-001 and # 30-92-106.
    view full answer...
  • Will Bargman Lens 30-92-012 Fit a Cargo Craft Explorer Utility Trailer
    The lens you have referenced, # 30-92-012, is a replacement for a Bargman 92 series light like # 30-92-106. The number you have provided is not a the model number of the light. In order to determine if this lens will fit, you will need to measure the light. The 30-92-106 light is 8-9/16 inches long by 4-9/16 inches tall by 2-1/8 inches deep.
    view full answer...
  • Determining Replacement Tail Light W/ License Plate Bracket For 2016 Forest River Evo
    I would be more than happy to help you figure out which replacement tail light with a license plate holder is correct for your 2016 Forest River Evo but you will need to take a few measurements as we do not have a break down of tail lights by manufacturer. Based on the pictures I found of your 2016 Forest River Evo you have a light similar to the Bargman Tail Light w/ License Bracket # 30-92-108 which measures 8-9/16" wide x 4-9/16" tall x 2-1/8" thick, and has mounting bracket holes...
    view full answer...
    Image 1 for
  • Will Bargman Replacement Lens # 30-92-012 Work for 2007 Fleetwood Taos Pop-Up Trailer Light
    The Bargman Replacement Lens # 30-92-012 is the replacement lens for Bargman 92 Series surface -mount tail lights, like the Bargman # 30-92-001 and # 30-92-106 and should fit the light on your 2007 Fleetwood Taos Pop-Up trailer. The replacement lens is 8-1/2 inches by 4-9/16 inches and I have included a video with more in-depth information on this product. If you need further replacement parts for your Bargman 92 Series light, I recommend the Wesbar Bulb # 30-90-157. It is a double-filament...
    view full answer...
  • Bargman 92 Series Replacement Tail Lights
    The 30-92-xxx you mentioned is a reference to the Bargman 92 Series of trailer tail lights and we do carry those; they do use the 1157 bulbs you mentioned, and you can choose from either a white base or black base: - Driver Side: Bargman Tail Light with License Bracket # 30-92-108 (Black Base) or # 30-92-003 (White Base) - Passenger Side: Bargman Trailer Tail Light # 30-92-106 (Black Base) or # 30-92-001 (White Base) I have added links to a couple video reviews for you to check...
    view full answer...
  • Replacement Trailer Tail Light Lens for Bargman 92 Series Tail Lights
    Replacement lens # 30-92-012 is designed to fit Bargman 92 series lights # 30-92-001 and # 30-92-106. These lights are 8-9/16" long x 4-9/16" wide x 2-1/8" thick. The length and width mesh with the dimensions you have provided. The depth is the overall depth of the light itself, not just the lens. It possible that this is the correct lens for your light if your lights are the same as either of the two listed above.
    view full answer...
  • Replacement Tail Light Lens for Bargman 92 Series Tail Lights
    There are a number of different Bargman 92 series tail lights, but the differences in thicknesses on the # 30-92-708 and # 30-92-012 is down to one of the measurements on the diagram that shows the 2-1/8" includes the base and is not simply the lens itself. So you've found the correct replacement lens you're looking for. The Bargman # 30-92-012 is designed to work as a replacement lens for the # 30-92-001 and # 30-92-106 Series 92 lights, which are passenger side lights that match the...
    view full answer...
  • Will Bargman 92 Series Lens 30-92-012 Fit a 2001 StarCraft Pop-Up Camper
    I did some research on your camper model and I was not able to confirm which specific light the manufacturer uses. I found some pictures of 2001 StarCraft pop-up models that did appear to have a similar lens style to the # 30-92-001 lens you referenced, but I also came across some 2001 models with entirely differently shaped lights. The owners manual for that year lists a 1157 bulb as the replacement for the tail and turn lights, which would be consistent with the bulb used in the lights...
    view full answer...
  • Replacement Tail Light Assemblies For a 2005 Forest River Flagstaff 206LTD Camping Trailer
    From the images that I was able to find of the tail lights on your 2005 Forest River Flagstaff 206LTD it does appear to have the Bargman Tail Lights # 30-92-108 and # 30-92-106. It is common for manufacturers to keep using the same tail lights from different years unless them make significant model changes.To confirm that it is the correct size you can measure your tail light assembly. Width- 8-9/16" Height- 4-9/16" Depth- 2-1/8" The mounting hole pattern is 7-1/8" wide and...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Brian T
Updated by:
Brian T
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.