1. Trailer Lights
  2. Bargman
  3. Tail Lights
  4. Rectangle
  5. Incandescent Light
  6. Red and White
Bargman Trailer Tail Light - 5 Function - Incandescent - Rectangle - White Base - Red/Clear Lens

Bargman Trailer Tail Light - 5 Function - Incandescent - Rectangle - White Base - Red/Clear Lens

Item # 30-92-002
lowest price pledge
Our Price: $22.74
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.78 lbs
Quantity: 
In Stock
30-92-002 - Stop/Turn/Tail/Backup,Rear Reflector Bargman Tail Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
8-9/16" x 4-9/16" Rectangle. Incandescent trailer tail light provides 5 functions: stop, turn, tail, rear reflector, and backup light. Corrosion resistant bulb socket. Surface mount - hardware not included. 5-Wire design. 2 Bulbs. Lowest Prices for the best trailer lights from Bargman. Bargman Trailer Tail Light - 5 Function - Incandescent - Rectangle - White Base - Red/Clear Lens part number 30-92-002 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (850)
  • Q & A (48)
  • Photos
  • Why etrailer?

Bargman Trailer Lights - 30-92-002

  • Tail Lights
  • Rectangle
  • Incandescent Light
  • Red and White
  • 8-1/2L x 4-1/2W Inch
  • Surface Mount
  • Stop/Turn/Tail/Backup
  • Rear Reflector
  • Non-Submersible Lights
  • Bargman

8-9/16" x 4-9/16" Rectangle. Incandescent trailer tail light provides 5 functions: stop, turn, tail, rear reflector, and backup light. Corrosion resistant bulb socket. Surface mount - hardware not included. 5-Wire design. 2 Bulbs.


Features:

  • Incandescent tail light provides 5 functions
    • Stop, turn, tail, rear reflector, and backup light
    • Built-in reflex reflector removes the need for a separate reflector
  • Radius styling with white base has rounded corners for clean look
  • Corrosion-resistant bulb socket protects bulb
  • Incandescent bulbs can be easily replaced
  • Durable ABS plastic housing
  • Red and clear lens over incandescent bulb
  • Compatible with 12V DC systems
  • Surface mount in horizontal position - hardware not included
  • 5-Wire design includes power leads and ground wires
  • DOT compliant
    • Meets FMVSS/CMVSS 108 requirements


Specs:

  • Dimensions: 8-9/16" wide x 4-9/16" tall x 2-1/8" thick
  • Number of bulbs: 2
  • Bulb type:
    • Tail light: 1157
    • Reverse light: 1156
  • Power draw at 12V:
    • Stop/turn: 2.1 amps
    • Tail: 0.59 amps
  • Wire length: 7"
  • Wire gauge: 16
  • 1-Year limited warranty


Bargman 30-92-002 Single Tail Light Dimensions

Surface-Mount Light

Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.



30-92-002 Bargman 92 Series Trailer Combination Tail Light - Stop, Turn, Tail, Backup - Incandescent - Rectangle - Horizontal - White Base - Red/Clear Lens - Surface Mount




California residents: click here



Customer Reviews

Bargman Trailer Tail Light - 5 Function - Incandescent - Rectangle - White Base - Red/Clear Lens - 30-92-002

Average Customer Rating:  4.9 out of 5 stars   (850 Customer Reviews)

8-9/16" x 4-9/16" Rectangle. Incandescent trailer tail light provides 5 functions: stop, turn, tail, rear reflector, and backup light. Corrosion resistant bulb socket. Surface mount - hardware not included. 5-Wire design. 2 Bulbs.

- 30-92-002
by:

Installed on my 2004 Winnebago Sightseer. Perfect size exact fit replacement, good clearance mounted within the rear bumper wells, bright lens, good illumination with standard incandescent bulbs. Easy install, just follow same wiring pattern and colors, used 22-18GA splice connectors to bulbs and closed end crimp connector for gathering and crimping the three ground wires. crimp on connectors.



- 30-92-002
by:

The tail lights arrived as expected, packaging was more that adequate! All external lights (incandescence) were upgraded to "LED"s on a 1985 SunLine 5th wheeler, including the Tail Lights purchased from etrailer. These tail lights worked great day one and continue to shine bright!



- 30-92-002
by:

Needed new lights to replace broken on 1990 motor home said never find any then hit lap top found etrailer.com lights just the thing easy to install work great thank you.


Comments
still working very well very glad i used this light
Lawrence - 10/22/2020


- 30-92-002
by:

I have a 1993 Ford four winds with and E 350 chassis and these light were good replacements for my old square ones. I also got the 15 degree angled basis and they were perfect as well. Holes lined up the same and everything!



- 30-92-002
by:

Exact replacement, perfect fit, fast ship. Definitely recommending e-trailer. Thank you for great service.



- 30-92-002
by:

Works perfectly. Only etrailer had what I needed to fit my RV.



- 30-92-002
by:

These parts fit perfectly on a 1995 Ford chassis 350E motorhome. They look great also! etrailer.com has just become our go-to place for parts.


Comments
Better than great! We have a classic Honorbuilt motorhome. OEM parts are nonexistent. These fit beautifully. No more worrying if I have brake lights or blinkers. Would highly recommend.
K.T. J - 10/27/2020


- 30-92-002
by:

I couldn't be happier. It's nice getting my old 1973 RV looking new again with up to date running lights and brake lights. I definitely will be doing business again with etrailer.com



- 30-92-002
by:

Perfect replacement for older campers with obsolete tail lights.


Comments
Still working perfectly
Kevin - 09/27/2020


- 30-92-002
by:

This review is for both the 30-92-002 and 30-92-004 Bargman taillights. Recently,when I tried to remove the red lens of the right taillight on my 19 year-old fifth wheel travel trailer (Bargman 30-92-002). As I tried to push the old plastic tab in to release the lens, the tab broke off of the base . I checked the left taillight, and the plastic tabs that hold the license plate on that taillight (Bargman 30-92-004) were cracked and broken. I'm lucky the license plate didn't just fall off on the road somewhere! I decided to replace both taillights. Fortunately, eTrailer had them in stock. I chose the lowest-cost shipping option. The cardboard box containing both taillights didn't have much padding, but it arrived on time and the taillights appear to be in good condition. I have not installed these yet, but they look like exact replacements for the ones on my trailer. They also included two bulbs each, a bonus! Thank you eTrailer for having the items I wanted at a reasonable price. The low-cost shipping option is also appreciated.



- 30-92-002
by:

All the items have done well so far.



- 30-92-002
by:

product was exact replacement,no flaws



- 30-92-002
by:

Ya see there was this tree ......... You guys are lifesavers .. It was an exact match to the broken one , an easy fix ( I don't get many ) ,it arrived in a short time and at a good price.



- 30-92-002
by:

great service with quick delivery



- 30-92-002
by:

So much room for improvement with this product... Bargman has been making this part for many years and they dont upgrade anything... No weep holes and could use stronger plastic parts. the back pannel is horrid in trying to hide wires. no place to do this with this design. there is plenty of opportunity to mold a wire box... and... it came without any wiring instructions. My RV has three wires and the unit has 5.



- 30-92-002
by:

So much room for improvement with this product... Bargman has been making this part for many years and they dont upgrade anything... No weep holes and could use stronger plastic parts. the back pannel is horrid in trying to hide wires. no place to do this with this design. there is plenty of opportunity to mold a wire box... and... it came without any wiring instructions. My RV has three wires and the unit has 5.



- 30-92-002
by:

Arrived timely and intact. Works fine. Thank you.



- 30-92-002
by:

Thank you for having in stock exactly what I needed for my 16 year old Winnebago.



- 30-92-002
by:

Excellent and speedy service with a great web sight for parts and questions. I highly recommend etrailer for all your camping trailer needs. The parts I ordered were tail lights for my Aliner trailer. Exactly the lights I need and in brand new condition. Couldn't ask for better service.



- 30-92-002
by:

Worked like they should, good product.



- 30-92-002
by:

I broke a trailer rear light cover, and could not find one locally to match the remaining one. Once I looked online, I found what I needed almost instantly at etrailer. Price was very reasonable, shipping minimal, and I had the cover within 4 days. Very pleased with etrailer.



- 30-92-002
by:

These are the exact replacement of what I needed. Easy to install. Color coded wiring made it super easy. They could supply hardware but they're pretty affordable so Bargman gets a pass. It would be nice if they were LED but good enough for the ole 2001.



- 30-92-002
by:

Perfect replacement lenses for our Trailmanor 1926. Side note for trailmanors.. you don't have a ground wire connecting to the lights, it uses a screw in the middle of the metal bracket holding the lamp sockets in place that screws into the sheet metal of the trailer to make ground. If no lights in a 'pod' work, check for good ground.



- 30-92-002
by:

This light was exactly what I was looking for. I replaced a broken taillight on my 1978 Jamboree RV.



- 30-92-002
by:

Fits nice and looks great. My 1995 Coleman/Fleetwood did not have backup lights, so I didn't connect that wire. My original lights were riveted in and extra care had to be taken to remove them. I drilled a small hole in the camper and used a screw to mount the new lights.


26
862
Show More Reviews

Ask the Experts about this Bargman Trailer Lights

  • Replacement Tail Lights Assemblies For a 1997 Coachman Catalina With Sloped Back Wall
    You will need the Bargman Wedge Base for 92 Series Tail Lights # 30-92-044 for your 1997 Coachman Catalina. The base will give the lights a 15 degree slant upward to make them sit correctly on your Catalina. The Bargman Trailer Tail Light # 30-92-002 is the passenger side taillight. The Bargman Trailer Tail Light w/ License Bracket # 30-92-004 is commonly used on the drivers side as it has the bracket and light for the license plate.
    view full answer...
  • 30-91-010 Bargman Light Replacement Recommendation
    The square style of light that you currently have has been discontinued and is no longer available. You would want to replace your current assemblies with the Bargman Surface Tail Light part # 30-92-002. The rounded corners would not need to be calked. They just would install in place of what you have and would work just fine. Since your current lights are acting funny you might check the condition of the grounds of the assemblies. The white wire will need to be connected to a clean...
    view full answer...
  • Wiring Red Reverse Light Wire on New Trailer Light Assembly
    The red wire on your new 5-function tail light assembly like the Bergman # 30-92-002 is indeed for the reverse light function. If the lights you are replacing did have a reverse function then you will just need to find the appropriate reverse circuit wire on the trailer by applying 12V power to each of them to see what function they activate. Most trailers though do not use reverse lights, so if your old lights didn't have a reverse function then it's more likely that there isn't an...
    view full answer...
  • Does Bargman Tail Light w/ Backup # 30-92-002 Come With Sockets and Bulbs and Instructions
    The inside of the Bargman Surface Mount Tail Light w/ Backup, part # 30-92-002 has two sockets with two bulbs. The top bulb is a # 30-90-156 single filament bulb that is for the reverse light. The bottom bulb is a # 30-90-157 double filament bulb that is for the tail light functions. I went out to the warehouse and took the lens off of the unit and took a picture that will show you what the inside looks like. I have attached the picture for you to see. The Bargman light does not come...
    view full answer...
    Image 1 for
  • Is the Bargman Trailer Tail Light 30-92-002 Complete Or Just the Replacement Lens
    The Bargman Trailer Tail Light part # 30-92-002 is a complete light assembly, the part # 30-92-704 is for just the lens. The same goes for the Bargman Trailer Tail Light part # 30-92-004.
    view full answer...
  • LED Trailer Lights to Replace Bargman # 30-92-002
    The closest LED tail light we carry to Bargman # 30-92-002 that you referenced is part # 328-003-81M1 for the passenger's side and # 328-003-81LM1 for the driver's side. They're fairly close in size but don't have the reverse light circuit like the Bargman lights do.
    view full answer...
  • Replacement Trailer Light for SAE Number SAE-AILRST-73 DOT
    If the lights you want to replace are stop, turn, tail light, and back up lights, then part # 30-92-002 and part # 30-92-004 would work for you. I have attached a drawing that shows the dimensions of the two lights mentioned above. These lights measure 8-9/16 inches x 4-9/16 inches x 2-1/8 inches. The mounting holes measure 7 inches center to center.
    view full answer...
    Image 1 for
  • Wiring New Brake Lights in Pop Up Camper That Uses More Wires than Older Lights
    Sounds like you bought the Lumitronics trailer taillight that's similar to the # RVST51 you referenced but also has a reverse light circuit built into the center of the light like the # 30-92-002 which is why there's seemingly an extra wire. Since we don't carry the brand you have I can reasonable guess what the functions of the wire colors are on your light but you might test them by running the white wires to the negative post of the battery and then checking each of the wires to...
    view full answer...
  • Replacement Lens Recommendation for SAE AILRST 73 DOT
    If the lights you want to replace are stop, turn, tail light, and back up lights, then part # 30-92-002 and part # 30-92-004 would work for you. I have attached a drawing that shows the dimensions of the two lights mentioned above. These lights measure 8-9/16 inches x 4-9/16 inches x 2-1/8 inches. The mounting holes measure 7 inches center to center.
    view full answer...
    Image 1 for
  • Replacement Tail Lights for a 1981 Palomino Pop Up Camper
    The first thing to look at is the size of the Bargman tail light # 30-92-002 and how it compares to the existing lights on your 1981 Palomino pup. The Bargman light is 8-9/16" long x 4-9/16" wide x 2-1/8" thick. The wiring on this light may seem a little confusing but I can explain it. The two white wires are ground wires and will need to attach to a clean, bare metal surface. The black wire is for brake lights and turn signals. Green is for running lights. That leaves the red wire...
    view full answer...
  • How to Convert Taillights of 2014 Keystone to LED
    Sounds like you have the very standard trailer taillight like the part # 30-92-004 for the driver side and part # 30-92-002 for the passenger side. We do have LED replacements available for you # RVSTL60 for the passengers side and # RVSTL61 for the drivers side should do the trick for you. I really like the way LED's look on a trailer good choice on the upgrade!
    view full answer...
  • Wiring Configuration for Bargman Travel Trailer Stop, Turn, Tail and Back Up Light
    For the Bargman Travel Trailer Stop, Turn, Tail and Back Up Light # 30-92-002 the wiring configuration is as follows: Red wire: Reverse light circuit Green wire: Tail light circuit Black wire: Blinker and brake circuit White wire: Ground wire to trailer frame This particular light has two white ground wires and both need to be grounded to a clean bare metal spot on the trailer frame.
    view full answer...
  • Troubleshooting a Bargman Tail Light # 30-92-002 Installation
    It sounds like you might need to check the wiring of the Trailer Light # 30-92-002. I think there might be an issue on the tail light and blinker circuits that is causing your tail lights not to work when your brakes are applied. It almost sounds like the wiring might be backwards between the two circuits. Here is how the # 30-92-002 should be wired up: The red wire should be wired to the reverse light circuit. The green wire should be wired to the tail light circuit. The black...
    view full answer...
  • Can Bargman Tail Lights with Reverse Lights be Added to a Trailer that Does Not have Reverse Lights
    Bargman Surface Mount Tail Light # 30-92-002 mounts to a flat surface so technically it can be installed on any trailer. To determine if they are a direct fit to your 2015 Keystone Hideout I would have to know which lights it has now or the overall dimensions of the lights. Trailers rarely have reverse lights and to add them is going to require hardwiring at least 1 wire and changing the connector (if the current connector is a 4-Way). Or there are connectors you can get that also have...
    view full answer...
  • Troubleshooting Flashing Reverse Lights on a Trailer
    It sounds like the problem lies in either the trailer connector on your Ford Ranger or on your trailer. If I had to guess it sounds like the 12 volt accessory circuit from either trailer connector is shorting out to the reverse light circuit intermittently and that is why the reverse lights are flashing. I would recommend you inspect the trailer wiring on both connectors looking for any corrosion or anything else that could cause a short and fix as necessary. I attached an FAQ article...
    view full answer...
  • Replacement Rectangular Surface Mount Tail Light Without Backup/Reverse Light
    The Bargman Surface Mount Tail Light - 92 Series - Red - White Base # 30-92-001 is the equivalent to the Bargman Surface Mount Tail Light w/ Backup - 92 Series - Red - White Base # 30-92-002 without the reverse/backup light.
    view full answer...
  • Replacement 92 Series Taillight Recommendation for Trailer with Reverse Light
    Thanks for the picture! From that we know that the correct replacement is the part # 30-92-002 which is an exact replacement for what you have.
    view full answer...
  • Recommendation for a Replacement Light Discontinued Wrap Around Light
    I have a solution for your camper tail light. However, unfortunately, we do not have a light that exactly matches your current light. Like you said, that light has been discontinued. Your best option is to replace the whole light assembly. The Optronics Camping Travel Trailer Light, # 30-92-002 can replace you current light assembly. This light has a 5 light function: tail, stop, turn, and reverse light plus rear reflector. For the matching driver side with license plate holder use...
    view full answer...
  • Replacing Damaged Taillight On Camper
    If you're looking for the driver's side version of the # 30-92-002, you'll want the # 30-92-004, which has the built in license plate bracket and license plate light. Once you remove the lens, and the screws holding the lamp housing to the camper body, there should be enough slack in the wiring that you can access the splice where the lamp connects to the camper's wiring harness. Pull gently on the wires, but if there isn't any give in them, you'll need to access the wiring from underneath...
    view full answer...
  • Recommended 1156 LED Bulbs For Bargman 30-92-XXX Light
    Since your Bargman light uses 1156 bulbs you can use the # ARC45FR to make them LED, but I was unable to find a complete replacement with the same dimensions that is LED. I included a video of the # ARC45FR for you to take a look at.
    view full answer...
  • Does Bargman Trailer Tail Light 30-92-002 Include One or Two Lights?
    The Bargman Trailer Tail Light # 30-92-002 you were looking at is just one light so you will need to order the other side separately. This light is typically used on the passenger side due to it not having the license plate light, where the # 30-92-004 is typically used on the driver side as it has a license plate light and mounting bracket. I included videos for both of the products mentioned for you to take a look at.
    view full answer...
  • Replacement Bargman 92 Series Trailer Tail Light
    We do have the correct replacement tail light for you, which is a Bargman 92 Series tail light. The SAE number isn't actually a part number but the photo was extremely helpful and allowed me to find the right light for you. What you need is the following: - Bargman Trailer Tail Light # 30-92-002 This is the side for the license plate bracket but if you do need the other side (with the bracket) that part is the Bargman Trailer Tail Light with License Bracket # 30-92-004.
    view full answer...
    Image 1 for
  • Replacement Trailer Lights for 1991 Jayco Pop Up Trailer
    Based on the dimensions you listed and how popular the Bargman trailer taillights # 30-92-003 I'd say this is most likely what you need. But if this doesn't look right email me a picture of what you have and I can see if we have a replacement. For a version of this that does not have the license plate bracket we also have the part # 30-92-002.
    view full answer...
  • Replacement Tail Lights for 1981 Sunline TV Travel Trailer
    Based on photos of a 1981 Sunline camper I can find online it appears the Bargman Trailer Tail Light - 5 Function - Incandescent - Rectangle - White Base - Red/Clear Lens # 30-92-002 is a good replacement option for you. This light is 8-9/16" long x 4-9/16" wide x 2-1/8" thick. Another similar option is the same light with a black base # 30-92-107.
    view full answer...
  • Replacement Tail Light for 2003 Coleman Cheyenne Pop Up Camper
    We do not have the replacement lens you are seeking as lights do get changed by manufacturers over time. The replacement light I recommend for the similar look ans size is the Bargman Trailer Tail Light - 5 Function - Incandescent - Rectangle - White Base - Red/Clear Lens # 30-92-002. This light is 8-9/16 by 4-9/16 by 2-1/8 inches. I've attached a video to assist.
    view full answer...
  • Is White Base of Bargman 92 Series Light Available Separately
    I can certainly understand wanting to be able to piece together parts of the lights to try and get some cost savings, but the white base alone of the Bargman Trailer Tail Light # 30-92-002 or # 30-92-004 is not something that is made available as a standalone part. For a new base you would need to get a new complete light assembly as the only replacement parts for the Bargman 92 Series of lights is the Lens # 30-92-704.
    view full answer...
    Image 1 for
  • Why is Trailer Taillight # RVST56 Listed as Driver Side Taillight
    The part # RVST56 can work well on either side of the trailer. The reason its listed for the driver side is because it comes with a license plate bracket which is commonly on the driver side of the trailer. For a similar light that does not have the bracket we have the part # 30-92-002.
    view full answer...
  • Replacement Taillight Assemblies with SAE-AILRST-94 DOT Markings on Lenses
    It sounds like you're needing a Bargman 92/94 series taillight. The DOT number you provided usually doesn't steer us to a replacement lamp, the actual part number of your lamps should be printed or stamped on the lamp housings themselves, not the lens. However, this particular one has come up enough that we had record of it. For the driver's side (assuming you need the license plate bracket), use part # 30-92-003 and part # 30-92-001 for the passenger side. If your existing lamps have...
    view full answer...
  • Replacement Taillight Recommendation for 2003 Winnebago Vista
    For the driver's side (assuming you need the license plate bracket), use part # 30-92-003 and part # 30-92-001 for the passenger side. If your existing lamps have reverse lamps, use # 30-92-004 for the driver's side and # 30-92-002 for the passenger side. The Bargman 92/94 series taillights use 1157 bulbs so if you wanted to convert them to LED you would just need to go with a matching LED style bulb like the part # P241157R-360 which is a pair of 1157 LEDs. I was not able to find...
    view full answer...
  • Replacement Bargman 92 Series Tail Lights with White Base and Reverse Light Function
    The 92 Series tail light set with the white base is found with part # 30-92-004 that has the license plate bracket and part # 30-92-002 that is the same light just without the license plate bracket or license plate light. These lights measure 8-9/16" long x 4-9/16" wide x 2-1/8" thick which you can use to compare to the lights that you are replacing. I have attached links to some review videos for you to check out as well.
    view full answer...

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Updated by:
Laura H
Employee Brian T
Updated by:
Brian T
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.